Xorg/ATI drivers fail
Paul Santa Maria
paulsm1021 at yahoo.com
Sat Jul 23 23:13:03 PDT 2005
Hi -
1. I downloaded, built and installed Xorg 6.8.99.15 with no problems.
2. Running "Xorg -configure" fails with the following error.
3. Subsequently running "X -config /root/Xorg.conf" crashes Linux
Completely hung: no "oops", no error messages - completely DEAD
until I cold boot!
Has anybody encountered this?
Does anybody have any suggestions as to what might be wrong, or how I should
proceed?
Thank you very much in advance!
====================================================================
Xorg -configure =>
---------------
This is a pre-release version of the The X.Org Foundation X11.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the The X.Org Foundation "monolithic tree" CVS
repository hosted at http://www.freedesktop.org/Software/xorg/
X Window System Version 6.8.99.15
Release Date: 16 July 2005 + cvs
X Protocol Version 11, Revision 0, Release 6.8.99.15
Build Operating System: Linux 2.6.8-24.14-default i686 [ELF]
Current Operating System: Linux linuxdev1 2.6.8-24.14-default #1 Tue Mar 29
09:27:43 UTC 2005 i686
Build Date: 23 July 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 23 23:13:30 2005
List of video drivers:
radeon
r128
atimisc
mga
glint
nv
tga
s3
s3virge
sis
rendition
neomagic
i740
tdfx
savage
cirrus
vmware
tseng
trident
chips
apm
i128
nsc
i810
ati
imstt
newport
ark
cyrix
siliconmotion
via
vesa
vga
dummy
fbdev
v4l
sisusb
dlopen: /usr/X11R6/lib/modules/drivers/r128_drv.so: undefined symbol:
gR128EntityIndex
(EE) Failed to load /usr/X11R6/lib/modules/drivers/r128_drv.so
(EE) Failed to load module "r128" (loader failed, 7)
dlopen: /usr/X11R6/lib/modules/drivers/atimisc_drv.so: undefined symbol:
ATIMemoryTypeNames_88800CX
(EE) Failed to load /usr/X11R6/lib/modules/drivers/atimisc_drv.so
(EE) Failed to load module "atimisc" (loader failed, 7)
dlopen: /usr/X11R6/lib/modules/drivers/apm_drv.so: undefined symbol: XvRTPort
(EE) Failed to load /usr/X11R6/lib/modules/drivers/apm_drv.so
(EE) Failed to load module "apm" (loader failed, 7)
dlopen: /usr/X11R6/lib/modules/drivers/newport_drv.so: undefined symbol:
XAAFallbackOps
(EE) Failed to load /usr/X11R6/lib/modules/drivers/newport_drv.so
(EE) Failed to load module "newport" (loader failed, 7)
(++) Using config file: "/root/xorg.conf.new"
(WW) RADEON: No matching Device section for instance (BusID PCI:2:1:1) found
(WW) RADEON: No matching Device section for instance (BusID PCI:2:2:1) found
(WW) RADEON: No matching Device section for instance (BusID PCI:2:3:1) found
(WW) ****INVALID IO ALLOCATION**** b: 0xc800 e: 0xc900 correcting
(WW) ****INVALID IO ALLOCATION**** b: 0xc400 e: 0xc500 correcting
(WW) ****INVALID IO ALLOCATION**** b: 0xc000 e: 0xc100 correcting
Xorg detected your mouse at device /dev/mouse.
Please check your config if the mouse is still not
operational, as by default Xorg tries to autodetect
the protocol.
Xorg has configured a multihead system, please check your config.
Your xorg.conf file is /root/xorg.conf.new
To test the server, run 'X -config /root/xorg.conf.new'
More information about the xorg
mailing list