Dynamically switch ServerLayout - is it possible ?

[patrick.steiner at a1.net]

 > I have attached my current xorg.conf. Still needs some tuning ... I'm
> working
> with KDM as my display manager and have a script which starts X with the
> correct layout. The "correct" layout is determined via lspci etc.
>
> During boot of the machine, I'm using the command
>
> 855resolution 5c 1400 1050

have done 855resolution 5c 1680 1050 (should 915resolution also work?)


> snapshot has a simple install.sh script which takes care of everything.

installed latest snapshot. now i get the following error if i try to start
X with 1680x1050


# startx


X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.9-22.ELsmp i686 [ELF]
Current Operating System: Linux edvlinux.ORA.LOCAL 2.6.13-1.1532_FC4smp #1
SMP Thu Oct 20 01:51:51 EDT 2005 i686
Build Date: 21 September 2005
Build Host: hs20-bc1-6.build.redhat.com

        Before reporting problems, check http://wiki.X.Org
        to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.6.13-1.1532_FC4smp
(bhcompile at tweety.build.redhat.com) (gcc version 4.0.1 20050727 (Red Hat
4.0.1-5)) #1 SMP Thu Oct 20 01:51:51 EDT 2005
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 24 13:02:10 2005
(==) Using config file: "/etc/X11/xorg.conf"
(WW) I810: No matching Device section for instance (BusID PCI:0:2:1) found
(1680x1050,Monitor0) mode clock 100000MHz exceeds DDC maximum 140MHz
(1400x1050,Monitor0) mode clock 100000MHz exceeds DDC maximum 140MHz
(1280x960,Monitor0) mode clock 100000MHz exceeds DDC maximum 140MHz
(1280x800,Monitor0) mode clock 100000MHz exceeds DDC maximum 140MHz
(1152x864,Monitor0) mode clock 100000MHz exceeds DDC maximum 140MHz
(EE) I810(0): [dri] I830DRIScreenInit failed because of a version mismatch.
[dri] libdri version is 4.1.0 bug version 5.0.x is needed.
[dri] Disabling DRI.
SESSION_MANAGER=local/edvlinux.ORA.LOCAL:/tmp/.ICE-unix/3681



-- 

Patrick Steiner  |  patrick.steiner at a1.net
ICQ:  128261350
Inet:  http://lawshome.at.tf

current working on:
Webmail :-)