Radeon M7 DRI does not work in Xorg7.1
Paulo J. Matos
pocmatos at gmail.com
Tue Jun 6 08:21:29 PDT 2006
Hi all,
I've just upgraded to Xorg7.1. Unfortunately it seems DRI doesn't work
as expected. Kernel is gentoo 2.6.16-r7.
Initially when I start X for the first time I get DRI and it seems to
work by a lot of errors 'on-screen' show up like black lines on top of
it, mouse cursor disappears with no explanation, etc. If I change to a
virtual terminal with Ctrl-Alt F2 and then back to graphics it is even
worse. If I logout and back it I don't have DRI anymore but at least
screen is ok.
Here's the hardware specs (with lspci -vv):
MotherBoard:
00:00.0 Host bridge: Intel Corporation 82845 845 (Brookdale) Chipset
Host Bridge (rev 04)
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
AGP:
00:01.0 PCI bridge: Intel Corporation 82845 845 (Brookdale) Chipset
AGP Bridge (rev 04) (prog-if 00 [Normal decode])
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Graphics Card:
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon
Mobility M7 LW [Radeon Mobility 7500] (prog-if 00 [VGA])
Capabilities: [58] AGP version 2.0
Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit-
FW- Rate=x4
Now, glxinfo output (without DRI):
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_EXT_texture_from_pixmap
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.5)
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_imaging, GL_ARB_multitexture,
GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow,
GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra,
GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_logic_op,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
GL_EXT_framebuffer_object, GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels,
GL_EXT_point_parameters, GL_EXT_polygon_offset, GL_EXT_rescale_normal,
GL_EXT_secondary_color, GL_EXT_separate_specular_color,
GL_EXT_shadow_funcs, GL_EXT_stencil_wrap, GL_EXT_subtexture,
GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias, GL_EXT_texture_object,
GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_NV_blend_square, GL_NV_point_sprite, GL_NV_texgen_reflection,
GL_NV_texture_rectangle, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow,
GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 24 tc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x24 24 tc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x27 24 dc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x28 24 dc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x29 24 dc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x2a 24 dc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x43 32 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 Ncon
Here's the card part from Xorg.conf: (Fastwrite is commented since I
was told it would not work on my hardware, still I used it for a long
time and never has problems).
Section "Device"
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility M7 LW [Radeon Mobility 7500]"
Option "AGPMode" "4"
# Option "AGPFastWrite" "True"
Option "EnablePageFlip" "True"
Option "AccelMethod" "EXA"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection
The log from X has some interesting parts: (full log is at
http://sat.inesc-id.pt/~pocm/archive/Xorg.0.log)
(II) Setting vga for screen 0.
(**) RADEON(0): RADEONPreInit
(II) RADEON(0): MMIO registers at 0xe8100000
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "AGPMode" "4"
(**) RADEON(0): Option "EnablePageFlip" "True"
(**) RADEON(0): Option "AccelMethod" "EXA"
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(==) RADEON(0): X server will not keep DPI constant for all screen sizes
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon Mobility M7 LW (AGP)" (ChipID = 0x4c57)
(--) RADEON(0): Linear framebuffer at 0xf0000000
(II) RADEON(0): AGP card detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.2.0 and kernel
module version 1.22.0
(**) RADEON(0): AGP 4x mode is configured
(II) RADEON(0): AGP Fast Write disabled by default
(II) RADEON(0): Page flipping enabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(WW) RADEON(0): [dri] limiting video memory to one aperture of 65536K
(WW) RADEON(0): [dri] detected radeon kernel module version 1.22 but
1.23 or newer is required for full memory mapping.
(II) RADEON(0): Detected total video RAM=32768K, accessible=65536K
(PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 32768 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(**) RADEON(0): RADEONScreenInit f0000000 0
(**) RADEON(0): Map: 0xf0000000, 0x02000000
(==) RADEON(0): Write-combining range (0xf0000000,0x2000000)
(**) RADEON(0): RADEONSave
(**) RADEON(0): RADEONSaveMode(0x8210078)
(**) RADEON(0): Read: 0x00000002 0x00040018 0x00000000
(**) RADEON(0): Read: rd=2, fd=24, pd=4
(**) RADEON(0): RADEONSaveMode returns 0x8210078
(II) RADEON(0): Dynamic Clock Scaling Disabled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [drm] DRM interface version 1.0
(II) RADEON(0): [drm] drmSetBusid failed (8, pci:0000:01:00.0),
Permission denied
(EE) RADEON(0): [dri] DRIScreenInit failed. Disabling DRI.
(**) RADEON(0): RADEONInitMemoryMap() :
(**) RADEON(0): mem_size : 0x02000000
(**) RADEON(0): agp_size : 0x0820ff50
(**) RADEON(0): agp_base : 0x0820ff50
(**) RADEON(0): MC_FB_LOCATION : 0xf1fff000
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): RADEONModeInit()
1400x1050 108.00 1400 34208 34320 1688 1050 1050 1053 1066 (24,32)
1400x1050 108.00 1400 34208 34320 1688 1050 1050 1053 1066 (24,32)
(**) RADEON(0): Pitch = 11534512 bytes (virtualX = 1400, displayWidth = 1408)
(II) RADEON(0): BIOS HotKeys Disabled
(**) RADEON(0): RADEONInit returns 0x8210a28
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x8210a28)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0xf1fff000
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): GRPH_BUFFER_CNTL from 20205c5c to 200f5c5c
(**) RADEON(0): RADEONSaveScreen(0)
(II) RADEON(0): Depth moves disabled by default
(**) RADEON(0): Setting up initial surfaces
(**) RADEON(0): Initializing fb layer
(**) RADEON(0): Setting up accel memmap
(II) RADEON(0): Allocating from a screen of 32768 kb
(II) RADEON(0): Will use 5808 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 26960 kb for X Server offscreen at offset 0x005ac000
(**) RADEON(0): Initializing backing store
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(**) RADEON(0): Setting up final surfaces
(**) RADEON(0): Initializing Acceleration
(II) RADEON(0): Render acceleration enabled for R100 type cards.
(**) RADEON(0): EngineInit (32/32)
(**) RADEON(0): Pitch for acceleration = 176
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): Initializing Page Flipping
(**) RADEON(0): Initializing DPMS
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(**) RADEON(0): Initializing Cursor
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor
(**) RADEON(0): Initializing color map
(**) RADEON(0): Initializing DGA
(**) RADEON(0): Initializing Xv
(II) RADEON(0): Detected Radeon Mobility M7, disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia/theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 7.1.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(**) RADEON(0): RADEONScreenInit finished
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) AIGLX: Screen 0 is not DRI capable
The I have hundreds of:
(**) RADEON(0): RADEONSaveScreen(2)
intermixed with:
(**) RADEON(0): RADEONLeaveVT
(**) RADEON(0): RADEONRestore
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x8210078)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0x1fff0000
(**) RADEON(0): MC_AGP_LOCATION : 0x27ff2000
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): Ok, leaving now...
(**) RADEON(0): RADEONSaveScreen(2)
(II) Open ACPI successful (/var/run/acpid.socket)
(**) RADEON(0): RADEONEnterVT
(**) RADEON(0): RADEONModeInit()
1400x1050 108.00 1400 34208 34320 1688 1050 1050 1053 1066 (24,32)
1400x1050 108.00 1400 34208 34320 1688 1050 1050 1053 1066 (24,32)
(**) RADEON(0): Pitch = 11534512 bytes (virtualX = 1400, displayWidth = 1408)
(II) RADEON(0): BIOS HotKeys Disabled
(**) RADEON(0): RADEONInit returns 0x8210a28
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x8210a28)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0xf1fff000
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): GRPH_BUFFER_CNTL from 20205c5c to 200f5c5c
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): Using hardware cursor
(**) RADEON(0): RADEONSaveScreen(2)
(II) Mouse0: ps2EnableDataReporting: succeeded
(**) RADEON(0): RADEONSaveScreen(2)
again... alot of them... This part seems to happen whenever I change
to a virtual terminal. Still the RADEONSaveScreen shows up a lot!
Is this known? Is there any workaround? Currently I'm loading during
boot the AGP driver only. Should I load anything else?
Cheers,
--
Paulo Jorge Matos - pocm at sat inesc-id pt
Web: http://sat.inesc-id.pt/~pocm
Computer and Software Engineering
INESC-ID - SAT Group
More information about the xorg
mailing list