Kontron MiniITX Board 886LCDn (Intel 855GM) - No display output with i810 driver
kunzmann at citron.de
Thu Jun 22 10:09:24 PDT 2006
We have some problems with the video driver for the i855GM of an Kontron
Board. The driver works with CRT and LFP as expected but with DFP there
are some problems. DFP is used over an expansion Card from Kontron with
an CH7301 Chip connected via DVO. There is no problem for resolutions up
to 1024x768 if you choose a higer one, the monitor show no signal.
The Driver is the actual driver from the xorg git repository. For
testing I have added two patches from airlied
( http://people.freedesktop.org/~airlied/i830_server_diffs and
Some changes were made to match the patches with the current version of
the git repository. The rawmode which are proviede by the patches is not
used. But with this patches there are lot of DEBUG messages. With the
help of this messages the problems seems to be that the settings for the
PLL are not right with higher resolutions. Another thing is that the
Settings for the PLL is the same for 1024x768, 1280x1024 and 1600x1200.
So I think the error can be found in this direction. Without the above
mentioned patch the driver shows the same behaviour. With the same
settings in xorg.conf the driver works with the different resolutions
with LFP and CRT only DFP is not working correctly with resolutions
higher than 1024x786.
My first thought was that there is a problem with an maximum value,
which is not high enough. But now I think there is a general problem
with the settings for the PLL over DFP!!
-------------- next part --------------
A non-text attachment was scrubbed...
Name: LOGFiles Proof.zip
Size: 132948 bytes
Desc: not available
More information about the xorg