ATI 9200 SE with XORG 6.8.2 on Gentoo

[Nick Ellson]

I was hoping that it would be able to get TV OUT on my ATI Radeon 9200 SE 
card. I have not seen any google searches that said my configuration 
wouldn't work, as I am not trying any beta stuff.

But I do get the long series of errors that others get. I am pasting in my 
basic data on modules loaded, lspci output, what happens when I start 
Xorg. (When I compile my Kernel, at the end it auto rebuild the 
ATI-DRIVERS package so it was recently matched with my kernel.. I see that 
mistake off google)

Do I have a setup that is doomed? Or might I have missed something.

Nick




Goonie ~ #   lsmod
Module                  Size  Used by
fglrx                 456012  0
netconsole              3616  0
parport_pc             28228  0
parport                36168  1 parport_pc
8250_pnp                8960  0
8250                   23252  1 8250_pnp
serial_core            21248  1 8250
floppy                 61892  0
snd_via82xx            27668  0
snd_ac97_codec         93984  1 snd_via82xx
snd_ac97_bus            2304  1 snd_ac97_codec
snd_mpu401_uart         7680  1 snd_via82xx
snd_rawmidi            24992  1 snd_mpu401_uart
i2c_viapro              8852  0
via_agp                 9984  1
agpgart                34760  2 fglrx,via_agp

Goonie ~ # lspci
00:00.0 Host bridge: VIA Technologies, Inc. Unknown device 0258
00:00.1 Host bridge: VIA Technologies, Inc. PT880 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. PT880 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. PT880 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. PT880 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. PT880 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID 
Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. 
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge 
[KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. 
VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 
78)
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 
SE] (rev 01)
01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] 
(Secondary) (rev 01)



Goonie ~ # Xorg -config /etc/X11/xorg.conf

X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.15-gentoo-r3 i686 [ELF]
Current Operating System: Linux Goonie 2.6.15-gentoo-r7 #1 Fri Mar 17 
13:36:50 PST 2006 i686
Build Date: 16 March 2006
         Before reporting problems, check http://wiki.X.Org
         to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 17 13:46:04 2006
(++) Using config file: "/etc/X11/xorg.conf"
Using vt 7
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) 
found
Symbol vgaHWGetIndex from module 
/usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol vgaHWUnlock from module 
/usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!

-- 
Nick Ellson
CCDA, CCNP, CCSP, CCAI,
MCSE 2000, Security+, Network+
Network Hobbyist, VFR Private Pilot.