Xorg 7.1 RC2 and ati binary drivers

[Marek W]

Greetings,

I have just decided to road test Xorg 7.1 RC2 on Asus W3V running Gentoo 
(gentoo-sources-2.6.16-r7 corresponds to vanilla kernel 2.6.16.14; KDE 
3.5.2). It is equipped with the Radeon X600 card.
I just wanted to confirm that fglrx drivers (8.24.8) currently don't work with 
7.1 since I got the following: 

(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
        compiled for 6.8.99.8, module version = 8.24.8
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 0.7
(EE) module ABI major version (0) doesn't match the server's version (1)
(II) UnloadModule: "fglrx"
(II) Unloading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(EE) Failed to load module "fglrx" (module requirement mismatch, 0)

Here's some more info on the system in question (lspci --vv):

00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express 
Processor to DRAM Controller (rev 03)
        Subsystem: ASUSTeK Computer Inc. Unknown device 1882
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information

01:00.0 VGA compatible controller: ATI Technologies Inc M24 1P [Radeon 
Mobility X600] (prog-if 00 [VGA])
        Subsystem: ASUSTeK Computer Inc. Unknown device 1881
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size 04
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
        Region 1: I/O ports at b000 [size=256]
        Region 2: Memory at f0000000 (32-bit, non-prefetchable) [size=64K]
        Expansion ROM at fbee0000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Express Endpoint IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
                Device: Latency L0s <256ns, L1 <4us
                Device: AtnBtn- AtnInd- PwrInd-
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
                Link: Latency L0s <256ns, L1 <2us
                Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x16
        Capabilities: [80] Message Signalled Interrupts: 64bit+ Queue=0/0 
Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [100] Advanced Error Reporting

Kind regards,


Marek Wawrzyczny
Send instant messages to your online friends http://au.messenger.yahoo.com