Fwd: Problem with intel 945G in "twin" mode

[Dave Airlie]

No its a completely different bug, one bug mentions multiple video
cards, this bug is only one video card..

do try to keep up :-)

Dave.

On 5/28/06, Tiago Vignatti <tv02 at c3sl.ufpr.br> wrote:
> It isn't a known bug?
> https://bugs.freedesktop.org/show_bug.cgi?id=2597
> https://bugs.freedesktop.org/show_bug.cgi?id=6751
>
> I have the same problem here when I try to initialize more than 2 cards,
> but it really depends what are the kernel+Xorg version that you are
> using. My workaround for this is to use a kernel < 2.6.13.
>
> regards
>
> Rohnny Moland escreveu:
> > ---------- Forwarded message ----------
> > From: Rohnny Moland <rmoland at gmail.com>
> > Date: May 27, 2006 11:38 AM
> > Subject: Re: Problem with intel 945G in "twin" mode
> > To: Dave Airlie <airlied at gmail.com>
> >
> >
> > Hi Dave,
> >
> > Thanks for your reply. I have attached the log and config file.
> >
> > Regards,
> > Rohnny
> >
> > On 5/27/06, Dave Airlie <airlied at gmail.com> wrote:
> >> could you attach xorg.0.log? and xorg.conf the warnings are only
> >> warnings..
> >>
> >> Dave
> >>
> >> On 5/27/06, Rohnny Moland <rmoland at gmail.com> wrote:
> >> > Hi,
> >> >
> >> > I am trying to setup suse 10.1 with two monitors (in twin mode - as
> >> > one big screen). In xorg I have set Xinerama to true, and also setup 2
> >> > monitor, device and screen sections in xorg.conf.
> >> >
> >> > When I run, the screens are just cloned. In xorg.0.log I get this
> >> warning:
> >> >
> >> > (WW) I810(0): Bad V_BIOS checksum
> >> >
> >> > ..and also this one:
> >> >
> >> > (WW) I810(0): Extended BIOS function 0x5f28 not supported.
> >> >
> >> > Also display plane b is disabled for some reason:
> >> >
> >> > (II) I810(0): Display plane A is enabled and connected to Pipe A.
> >> > (II) I810(0): Display plane B is disabled and connected to Pipe B.
> >> > (II) I810(0): Enabling plane A.
> >> > (II) I810(0): Display plane A is now enabled and connected to Pipe A.
> >> > (II) I810(0): Display plane B is now disabled and connected to Pipe B.
> >> > (II) I810(0): PIPEACONF is 0x80000000
> >> > (II) I810(0): PIPEBCONF is 0x80000000
> >> >
> >> > I wonder if someone know what the reason could be for this, and how I
> >> > can get twin mode to work. I am using SuSE 10.1 with xorg 6.9.0.
> >> > Kernel version: 2.6.16.13-4. The graphics card is intel 945G, using
> >> > the i810 driver.
> >> >
> >> >
> >> > Thanks in advance,
> >> >
> >> > Rohnny
>
>
> --
> Tiago Vignatti
> C3SL - Centro de Computação Científica e Software Livre
> www.c3sl.ufpr.br
> _______________________________________________
> xorg mailing list
> xorg at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/xorg
>