Dual Head with ATI (DVI + VGA)

[Dave Airlie]

>
> Here is my config:
>
> http://www.miketech.net/xorg/mergedfb3/xorg.conf
>
> And here is the log:
>
> http://www.miketech.net/xorg/mergedfb3/Xorg.0.log
>
>
> As you can see, everything seems to work fine. Both screens are detected
> correctly with the correct resolutions. But both screens are blank. I
> have set the monitorlayout to "crt,tmds" instead of "tmds,crt". This is
> also the result if i use "auto,auto".

Can you post 3 logs with the latest driver, 1 "tmds,crt" 2 "crt,tmds"
3 no setting at all...

Is this an-onboard card (IGP??), it seems to say it has external TMDS,
which we may not support yet as it requires driving an external chip,
I don't suppose you can figure out what the chip is? (sil1162 or
sil164)..

Dave.

>
> But in the man pages it is said, that I should use "tmds,crt". But with
> "tmds,crt" the second monitor works, but the first one (Dvi) is not
> detected correctly. The needed resolution is not found.
>
> So obviously I should use "crt,tmds" to have the right configuration,
> but "tmds,crt" to get any useful output on the screens.
>
> No idea, what I could do :(
>
> Greetings
>
> Mike
>
>
> > On 9/23/06, Michael Gebhart <lists at miketech.net> wrote:
> > > I can give it a try.
> > >
> > > Could you please give me any hint how to use git? Never worked with it.
> > > Where is the repository for the ati driver?
> >
> > Install git from distro is possible (git-core usually is package name...)
> > then
> > http://www.freedesktop.org/wiki/UsingGit
> >
> > the driver is at
> >
> > git://anongit.freedesktop.org/git/xorg/driver/xf86-video-ati
> >
> > You might need to install some devel packages on your distro to build
> > it, Edgy has them all...
> >
> > Dave.
> > >
> > > Greetings
> > >
> > > Mike
> > > > Can you install the latest ATI driver from git? I think it should fix
> > > > TMDS,CRT issues..
> > > >
> > > > Dave.
> > > >
> > > > On 9/23/06, Michael Gebhart <lists at miketech.net> wrote:
> > > > > Hi,
> > > > >
> > > > > I've seen, that I have to set the monitor layout to TMDS,CRT instead of
> > > > > CRT,TMDS. So now the second monitor is working, but there is no output
> > > > > on the DVI port, although the resolution is detected correctly.
> > > > >
> > > > > Any idea, what could be still wrong?
> > > > >
> > > > > Greetings
> > > > >
> > > > > Mike
> > > > > > Hi,
> > > > > >
> > > > > > I am still trying to get my ATI 9100 IGP working with dual head.
> > > > > >
> > > > > > I have Ubuntu Edgy Eft installed with the newest version of Xorg and the
> > > > > > xorg-ati drivers.
> > > > > >
> > > > > > I have two monitors connected, one on DVI another on VGA. Both screens
> > > > > > are detected correctly and the right resolutions are choosen.
> > > > > >
> > > > > > (1280x1024 for the monitor (Samsung) on DVI, 1024x768 for the monitor
> > > > > > (Philips) on VGA)
> > > > > >
> > > > > > Here is my lspci output:
> > > > > >
> > > > > > 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon 9100 IGP
> > > > > > (prog-if 00 [VGA])
> > > > > >       Subsystem: ASUSTeK Computer Inc. Unknown device 8107
> > > > > >       Flags: bus master, 66MHz, medium devsel, latency 255, IRQ 177
> > > > > >       Memory at e8000000 (32-bit, prefetchable) [size=128M]
> > > > > >       I/O ports at d000 [size=256]
> > > > > >       Memory at fdc00000 (32-bit, non-prefetchable) [size=64K]
> > > > > >       Expansion ROM at fdb00000 [disabled] [size=128K]
> > > > > >       Capabilities: [58] AGP version 3.0
> > > > > >       Capabilities: [50] Power Management version 2
> > > > > >
> > > > > > Here is my config:
> > > > > >
> > > > > > http://www.miketech.net/xorg/ati-info/xorg.conf
> > > > > >
> > > > > > And here is the log:
> > > > > >
> > > > > > http://www.miketech.net/xorg/ati-info/Xorg.0.log
> > > > > >
> > > > > >
> > > > > > As you can see everything is detected correctly, isn't it?
> > > > > >
> > > > > > My problem is, that both screens are blank. They enter the sleep mode
> > > > > > and don't display X.
> > > > > >
> > > > > > Any idea, what I am doing wrong?
> > > > > >
> > > > > > Greetings
> > > > > >
> > > > > > Michael
> > > > > >
> > > > > > _______________________________________________
> > > > > > xorg mailing list
> > > > > > xorg at lists.freedesktop.org
> > > > > > http://lists.freedesktop.org/mailman/listinfo/xorg
> > > > > >
> > > > >
> > > > > _______________________________________________
> > > > > xorg mailing list
> > > > > xorg at lists.freedesktop.org
> > > > > http://lists.freedesktop.org/mailman/listinfo/xorg
> > > > >
> > > >
> > >
> > > _______________________________________________
> > > xorg mailing list
> > > xorg at lists.freedesktop.org
> > > http://lists.freedesktop.org/mailman/listinfo/xorg
> > >
> >
>
>