vga-to-scart connection for Intel chipset?
Csillag Kristof
Csillag.Kristof.ext at united-consult.hu
Fri Apr 6 06:09:06 PDT 2007
Hi there!
Let's make the question more specific.
The only pre-requisite on the side of the graphics chip is to be able
to configure the needed video mode to drive the TV.
So, is it possible to configure my 965G to output 720x576 at 50 Hz.
Do you think this is possible?
Kristof
-----Eredeti üzenet-----
Feladó: Csillag Kristof
Küldve: 2007.04.06., P 10:54
Címzett: xorg at lists.freedesktop.org
Tárgy: vga-to-scart connection for Intel chipset?
Hi there!
This is not strictly a X.org related, but close enough, and I hope I can find
someone with the required expertise here:
Is it possible to build a direct VGA-to-SCART cable that would work with
integrated Intel graphics chipsets?
There are several schematics floating around (See [1], [2]) to connect the
analogue VGA input directly to the SCART input on the TV (supposing the TV
supports RGB input), but these are closely dependent of the exact nature
of the VGA signal output by the VGA card.
[1] is for ATI Radeon only, [2] seems to be generic.
Does anyone have some experience with using something like this with Intel
chipsets?
Thank you for your help:
Kristof Csillag
[1] http://ryoandr.free.fr/english.html
[2] http://www.tkk.fi/Misc/Electronics/circuits/vga2tv/circuit.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.x.org/archives/xorg/attachments/20070406/faa95227/attachment.html>
More information about the xorg
mailing list