Problem while mirroring X

[Puneet Goel]

Hello Alex,

Thanks for reply.


> >So I assume you are running an X server on the thin client and you
> >want the crtc to drive both outputs with the same signal?  If not, I
> >still don't understand your setup.  You may have to tweak your
> >modelines a bit so that they will work properly on both output types.
>
> You are right. My X is running on thin client. and i want to drive both
> o/p's with same signal. Regarding tweaking Modelines, as of now i created
> modelines using http://xtiming.sourceforge.net/cgi-bin/xtiming.pl tool.
> Can you give me hints on some other way of creating modelines ?


Regards,
Puneet


On 8/17/07, Alex Deucher <alexdeucher at gmail.com> wrote:
>
> On 8/17/07, Puneet Goel <puneet.maillist at gmail.com> wrote:
> > Hello Alex,
> >
> > Thanks for reply.
> >
> > On 8/16/07, Alex Deucher <alexdeucher at gmail.com> wrote:
> > >
> > > How exactly is this set up?  Are you using a VGA splitter? Does the
> > > card have two VGA ports? VNC?
> > >
> > > This is a thin client and doesn't have any specific display card.
> > Reference board was taken from db800. it has 2 display o/p one is for
> LCD
> > and one is for CRT. Secondary display goes via CRT. There is no seperate
> vga
> > splitter or vnc kinda thing.
>
> So I assume you are running an X server on the thin client and you
> want the crtc to drive both outputs with the same signal?  If not, I
> still don't understand your setup.  You may have to tweak your
> modelines a bit so that they will work properly on both output types.
>
> Alex
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.x.org/archives/xorg/attachments/20070817/75849844/attachment.html>