Avivo(r500) driver an ATI X1600PRO

[boris stevenson]

Randr shows
   
  Screen 0: minimum 320 x 200, current 1152 x 768, maximum 1280 x 1280
VGA connected 1152x648+0+0 16mm x 9mm
   1152x648       59.7*+   59.7
   1280x768       60.0
   1024x768       60.0     59.9
   800x600        60.3     59.9
   640x480        60.0
   720x400        70.1
DVI-I connected 1152x648+0+0 16mm x 9mm
   1152x648       59.7*+   59.7
   1280x768       60.0
   1024x768       60.0     59.9
   800x600        60.3     59.9
   640x480        60.0
   720x400        70.1
  640x480 (0x43)   25.2MHz
        h: width   640 start  656 end  752 total  800 skew    0 clock   31.5KHz
        v: height  480 start  490 end  492 total  525           clock   59.9Hz

   
  I have the 512mb version of the ATI X1600Pro AGP card. With the fglrx version, I can reach my 1920x1080 resolution. (Using DVI Out). Any ideas?
   
  

Jerome Glisse <j.glisse at gmail.com> wrote:
  On 6/26/07, boris stevenson wrote:
> I would personally like to thank Jerome and the entire avivo driver team for
> all their hard work on creating this excellent driver. I am wondering about
> a few things.
>
> - Is it possible to set 1920x1080 resolutions like with fglrx? (1080i). Each
> time I try to set the video mode it always seems to resort to one
> resolution only.
> - Any new developments for DRI support (For accelerated and clearer XVideo)?
>

If you use lastest source randr 1.2 should work, xrandr is the command
to change video mode, i believe there are GUI interface to this which are
in development (grandr and things like that).

best,
Jerome Glisse


 
---------------------------------
No need to miss a message. Get email on-the-go 
with Yahoo! Mail for Mobile. Get started.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.x.org/archives/xorg/attachments/20070627/7b3f0163/attachment.html>