[Patch] Allow to configure RANDR 1.2 outputs with no device attached

[Keith Packard]

On Mon, 2007-03-12 at 17:48 +0000, Barry Scott wrote:
>  
> If "connected" means the monitor returns DDC info then
> any monitor connected using VGA over CAT-5 will need this fixed
> as those products do not support DDC.

No, "connected" means plugged in; drivers detect the presense of a
monitor by measuring the impedence change of the output cable. When DDC
is not present, the system uses a default set of timings or the
configured timings.

-- 
keith.packard at intel.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
URL: <http://lists.x.org/archives/xorg/attachments/20070312/7197a167/attachment.pgp>