xf86-video-intel 2.0.0 and DVI

[Hamish Moffatt]

On Thu, May 31, 2007 at 12:52:14AM +1000, Hamish Moffatt wrote:
> On Tue, May 29, 2007 at 10:13:55AM -0700, Keith Packard wrote:
> > On Tue, 2007-05-29 at 23:32 +1000, Hamish Moffatt wrote:
> > > (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
> > > (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
> > 
> Apparently neither of the 75Hz modes works :-| 76Hz does.

FWIW, a certain N-brand video adapter connected to the very same display
via VGA results in working 75Hz;

(WW) NVIDIA(1): The user specified HorizSync "10.000-90.000" has been adjusted
(WW) NVIDIA(1):      to "31.000-81.000" (the intersection with EDID-specified
(WW) NVIDIA(1):      HorizSync "31.000-81.000")
(WW) NVIDIA(1): The user specified VertRefresh "10.000-90.000" has been
(WW) NVIDIA(1):      adjusted to "56.000-75.000" (the intersection with
(WW) NVIDIA(1):      EDID-specified VertRefresh "56.000-75.000"
(II) NVIDIA(1): DV172: Using hsync range of 31.00-81.00 kHz
(II) NVIDIA(1): DV172: Using vrefresh range of 56.00-75.00 Hz
(II) NVIDIA(1): Clock range:  12.00 to 350.00 MHz
[...]
(**) NVIDIA(1): Validated modes for display device CRT-1:
(**) NVIDIA(1):      Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(**) NVIDIA(1):      Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz


I can try it over DVI later.

Confused!,
Hamish
-- 
Hamish Moffatt VK3SB <hamish at debian.org> <hamish at cloud.net.au>