x -configure xorg-server-1.4.0.90

Andrea Fino af at faino.org
Tue Apr 8 09:27:47 PDT 2008


Dan Nicholson wrote:
> On Tue, Apr 8, 2008 at 7:22 AM, Andrea Fino <af at faino.org> wrote:
>   
>>  running X -configure I get:
>>
>>  Missing output drivers, Configuration failed.
>>
>>  What could I do then? Any hints?
>>     
>
> Install more of the xf86-video-* and xf86-input-* drivers. Is there
> more output specifying which drivers? Look in /var/log/Xorg.0.log.
>
>
>   

With a xorg.conf the modules installed works just fine. The box is Amd 
Geode Lx based. The log follow.

Best regards,
Andrea Fino


This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.22-14-server i686
Current Operating System: Linux alix1c 2.6.19 #1 Sun Apr 6 20:08:40 CEST 
2008 i586
Build Date: 06 April 2008  07:35:58PM
 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 14 00:03:02 2006
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81bf400
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 2.0
    X.Org XInput driver : 2.0
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
(--) using VT number 3

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:01:0: chip 1022,2080 card 1022,2080 rev 31 class 06,00,00 
hdr 80
(II) PCI: 00:01:1: chip 1022,2081 card 1022,2081 rev 00 class 03,00,00 
hdr 00
(II) PCI: 00:01:2: chip 1022,2082 card 1022,2082 rev 00 class 10,10,00 
hdr 00
(II) PCI: 00:0d:0: chip 1106,3053 card 1106,0106 rev 96 class 02,00,00 
hdr 00
(II) PCI: 00:0f:0: chip 1022,2090 card 1022,2090 rev 03 class 06,01,00 
hdr 80
(II) PCI: 00:0f:2: chip 1022,209a card 1022,209a rev 01 class 01,01,80 
hdr 00
(II) PCI: 00:0f:3: chip 1022,2093 card 1022,2093 rev 01 class 04,01,00 
hdr 00
(II) PCI: 00:0f:4: chip 1022,2094 card 1022,2094 rev 02 class 0c,03,10 
hdr 00
(II) PCI: 00:0f:5: chip 1022,2095 card 1022,2095 rev 02 class 0c,03,20 
hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:1:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
    [0] -1    0    0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
    [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
    [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:15:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:1:1) Advanced Micro Devices [AMD] Geode LX Video rev 0, Mem 
@ 0xe0000000/27, 0xefff0000/14, 0xeffec000/14, 0xeffe8000/14, 0xefff8000/14
Missing output drivers.  Configuration failed.





More information about the xorg mailing list