[ANNOUNCE] xf86-video-intel 126.96.36.199
stavallo at unina.it
Tue Dec 16 01:38:13 PST 2008
On Tuesday 16 December 2008 02:43:30 Zhenyu Wang wrote:
> Here's xf86-video-intel 2.6 rc1 release. The merges
> of DRI2 and XvMC support for Gen4 chips are complete,
> also with KMS, randr 1.3 support, UXA fixes and HDMI
> audio support.
> Please take a wide testing of this one, and report
> feedbacks. Thanks!
Running kernel 2.6.28-rc8 (and prior rc's) and the git master of libdrm, mesa
and xserver, I found that the intel driver causes a kernel panic while
suspending to disk since commit fcb2a5a1253c505913e66b08107c0a9f57b07bad
("Use buffer object for vertex buffer (in new gen4_dynamic_state)"). I have
reported this as bug #19044.
I would be grateful if you could have a look at this issue.
> Subject: [ANNOUNCE] xf86-video-intel 188.8.131.52
> To: xorg-announce at lists.freedesktop.org
> Adam Jackson (1):
> Quirk: No LVDS on Dell Studio Hybrid
> Bryce Harrington (2):
> PipeA quirk for Quanta/W251U (launchpad bug #244242)
> Pipe-A quirk for HP 2730p (bug #18852)
> Carl Worth (13):
> Ignore intel_gtt binary
> Rename gen4_state_t to gen4_static_state_t
> Rename gen4_state_init to gen4_static_state_init
> Rename state_base_offset to static_state_offset in
> gen4_static_state_init Use consistent idiom for obtaining static_state
> Use buffer object for vertex buffer (in new gen4_dynamic_state)
> 965: Move composite setup to new _emit_batch_header_for_composite
> Rename gen4_dynamic_state to gen4_vertex_buffer
> Unreference the vertex_buffer_bo in gen4_render_state_cleanup
> Use buffer objects for binding table and surface-state objects.
> i965: Add batch_flush_notify hook to create new vertex-buffer bo
> Don't smash fixed_mode if skip_panel_detect is set.
> Set vertex_buffer_bo to NULL after unreference.
> Dave Airlie (2):
> Default kernel mode setting to off, add configure flag to enable
> uxa: don't call composite routines with no buffer.
> Eric Anholt (26):
> Don't set up sarea or drm mappings in DRI2 mode.
> UXA: Re-enable non-965 render.
> DRI2: Emit the MI_FLUSH before flushing batch in swapbuffers.
> DRI2: Move pixmap pitch alignment for use with depth to pixmap
> create. Fix build failures that should have been in the previous merge
> commit. Remove the CheckDevices timer.
> Make I830FALLBACK debugging a runtime instead of compile-time option.
> i965: Support render acceleration with pixmaps in BOs.
> Remove DRI_MM defines which are always true now.
> UXA: Add support for tiled front/back/depth by cutting over to the
> GTT map. Re-enable composite accel on 965 with UXA.
> Enable tiling for DRI2 back/depth buffers.
> Move debug code for I965DisplayVideoTextured to separate functions.
> Move I965DisplayVideoTextured surface/sampler setup to separate
> functions. Move I965DisplayVideoTextured unit state setup to separate
> functions. Move i965 video cc state to BOs.
> Move i965 video vs/sf state to BOs.
> Stop allocating unused scratch space for i965 video.
> Move i965 video wm and sampler state to BOs.
> Move remaining i965 video programs to BOs.
> Move i965 video vertex data to BOs.
> Move i965 video surface state and binding table to BOs.
> Emit proper relocations to pixmaps in BOs in i965 video.
> Remove the extra memory allocation for 965 video state now that it's
> all in BOs. uxa: Add in EnableDisableFBAccess handling like examodule.c
> did. uxa: Reject solid/copy to under-8bpp destinations.
> Jesse Barnes (3):
> Don't modify render standby if kernel mode setting is active
> Default to FULL_ASPECT panel fitting
> Make sure DRM library paths are included
> Julien Cristau (1):
> Don't unconditionally define DRI2
> Keith Packard (3):
> Fix mis-merge of DRI2 changes related to pI830->directRenderingType
> Use long crt hotplug activation time on GM45.
> Add RandR 1.3 panning support by supporting the crtc set_origin
> Kristian Høgsberg (6):
> Add DRI2 support.
> Fix broken test for DRI1 in DRI2 conversion.
> Update to DRI2 changes.
> Fix KMS compilation.
> Simplify crtc preinit a bit.
> Make sure DRI/DRI2 can initialize properly with KMS.
> Ma Ling (1):
> enable Intel G35 SDVO HDMI audio output
> Maxim Levitsky (1):
> Add an option to make the overlay be the first XV adaptor.
> Paulo Cesar Pereira de Andrade (2):
> Export libIntelXvMC and libI80XvMC symbols.
> Include <X11/Xfuncproto.h> prior to including "edid.h" from the sdk.
> Robert Lowery (1):
> TV: add support to set TV margins in xorg.conf
> Wu Fengguang (3):
> introduce i830_hdmi_priv.has_hdmi_sink
> enable Intel G45 integrated HDMI audio output
> refresh batch_bo reference after intel_batch_flush()
> Zhenyu Wang (24):
> Make IS_GM45 into IS_G4X define
> SDVO: fix wrong order of sdvo version's major/minor
> SDVO: add HDMI audio encrypt change bit for GetInterruptEventSource
> command SDVO: fix sdvo tv format and sdtv resolution request/reply
> definition SDVO: add GetScaledHDTVResolutionSupport command
> SDVO: add command for set monitor power state
> SDVO: fix more command definition errors
> TV: white space cleanup
> TV: fix default contrast and saturation modifier
> TV: save serveral TV_CTL register fields in mode set
> TV: fix timing parameters for PAL, 480p, 1080i
> TV: subcarrier fix for NTSC and PAL
> quirk LVDS on Asus Eee box
> TV: fix contrast and saturation for 915/945G
> Disable XvMC on DRI2 for now
> Fix maxium backlight level restored issue
> Fix TV compiling warning
> Fix DRI2 compiling warning
> Remove Cappuccino SlimPRO SP625F 855GM LVDS quirk
> bug #17395: Quirk CRT for Sony VGC-LT71DB
> Try to always probe SDVOC on 965G/965GM
> Fix directRenderingType check
> Don't warn on ring enabled in GEM
> Bump version 184.108.40.206
> Zou Nan hai (13):
> 965 xvmc, current only frame based DCT_type support
> [965-xvmc] some fixes for earlier 965 chips
> Fix from He Shuang(shuang.he at intel.com),
> [965-xvmc] support field prediction and dct type, optimize in GPU
> [965-xvmc] add missing g4a file
> [965-xvmc] half-pixel bug fix
> [965-xvmc] some shader optimize
> [965-xvmc] There is some issue with uv half pixel, remove it till fix
> [965-xvmc] optimize, pack some payload
> [965-xvmc] IGD support
> [965-xvmc] 965q indirect media data workaround
> [965-xvmc] fix dual prime kernel, flush issue on G4x
> Update binary versions of the dual-prime kernels
> root (1):
> [i965-xvmc] bypass copy when put image with xvmc
> git tag: xf86-video-intel-220.127.116.11
>99.1.tar.bz2 MD5: fb7a7d9e068682aecdd077f2b99a9106
> xf86-video-intel-18.104.22.168.tar.bz2 SHA1:
> 16406db34bf58e4743b9db2619aca1508cf86f62 xf86-video-
>99.1.tar.gz MD5: 3eba1bbd185f16ef1f99d3fbc5c1f37a
> xf86-video-intel-22.214.171.124.tar.gz SHA1:
> 375359ab38fe91bdb9a90af3fd4c5fb7d4525903 xf86-video-intel-126.96.36.199.tar.gz
More information about the xorg