[ANNOUNCE] xf86-video-ati 6.9.0.91 - release candidate
Dave Airlie
airlied at redhat.com
Mon Dec 22 16:24:40 PST 2008
This is a pre-release of what will be called xf86-video-ati 6.9.1
Pre-release notes:
This contains a lot of bugfixes/enhancements, highlights include
Output support for all radeon chips from r100 to rv730 (mergedfb accel for all r600 and newer)
- rv710/730 DCE3.2 support
- Initial eMac support
- better HDMI support
Enhanced textured video support
- Bicubic shaders
- Large triangle rendering to decrease tearing
- vsynced Xv
Interlaced mode support
Lots of EXA correctness and stability fixes
Big-endian atombios support.
Initial ATOM tv-out support. This is disabled by default currently,
(please use the Option "ATOMTvOut" "TRUE" option in xorg.conf to test).
Regards,
Dave.
Adam Jackson (2):
Fix connector table mapping for lvtma/kaleidoscope/uniphy.
Fix HDMI output setup on DIG1/DIG2.
Adrian Friedli (1):
Add another AGP quirk
Alex Deucher (80):
Revert "IGP: attempt to fix VGA on IGP chips"
RADEON: IGP VGA fixes take 2
RS4xx: enable the DRI by default on all variants
Revert "rotate: fix rotation in conf file."
Add quirk for Falcon NW laptop
Fix cursor with multi-head and rotation
Make sure cursor offsets are properly aligned when using EXA
R300: NUM_FPU adjustments for VAP_CNTL
ATOM: Add support for UpdateCRTC_DoubleBufferRegisters cmd table
ATOM: fix for r4xx cards with no VRAM_Usage tables
Add oem quirk for external tmds setup on Dell Inspiron 8600
Clean up legacy display watermark setup
Clear display priority bits before resetting them
Interlaced mode fixups for AVIVO chips
First pass at InitDispBandwidth() for AVIVO chips
Add quirk for oem x300 card
Fix error in driver connector table for powerbook w/ vga
Change prim types for exa and textured video to help avoid tearing
IGP: Updated quirk handling
IGP: attempt to get external TMDS working
IGP: fix typo in IGP quirk handling
Remove un-needed dac check for single crtc cards
RS4xx: Fix up ddc gpio
RS4xx DDC fixes take 3
Fix VT switching on M6 chips
Further cleanup and unification of i2c code
Remove reset of 3D scissor registers when using the CP in the ddx
PLL adjustments
Whitespace cleanup from bucubic merge
Additional cleanups and re-arragement following bicubic merge
match textured video macro names with other accel code
Move CP into a separate struct
Move accel state to a separate struct
Move DRI to a separate struct
Switch to using radeon_drm.h from the drm
Convert randr, Xv to a common allocator
Bicubic fixes from the last cherry-pick
Switch cursors over to generic allocator
Switch EXA path back to static cursor allocation
fix some fallout from the common allocator
radeon: Add quirk for macbook
Fix copy/paste error in the last commit
more macbook fixes
cleanup macbook quirk
radeon: Further pll adjustments
atombios updates from upstream
Workaround to make initial rotation work
proper fix for initial rotation
man page updates
Add support for DDC via atom commands for RV410
Refactor atom LCD/DFP output setup
Turn coherent mode off by default on DVI
set grey levels correctly for temporal dithering
Fixups from last DFP/LCD refactor
Fix grey level dithering setup
Add LCD dithering quirk for macbook pro
Check for LVDS on all IGP chips
Don't support rotation is accel is not available
Get hardcoded edid from the bios for servers that support it
Fix up posted logic
radeon: fixup shared DDC lines for some rv610 cards.
Add quirk for r200 card with the primary dac wired to both ports
move 3d state init after RADEON_SWITCH_TO_3D()
Only flush IB when direct rendering is enabled
Make sure 3D state is emited when switching to 3D IB
Fix up US setup after r3xx bicubic merge
First pass at tear-free accel
Make VSync for EXA and Xv configurable
set coherent mode consistently (enabled for now)
R200: Remove scissor setup from init3d()
Add missing .TP in man page
Add randr 1.3 panning support
Add another AGP quirk
Add support for Apple eMacs
Remove mention of MergedFB from server log
Remove remnants of unused DDCMode option
R3xx-R5xx: switch back to quad rendering for Xv
R2xx: switch EXA composite to rects rather quads
Pre-avivo: fix FP setup
R3xx-R5xx: better fix for xv primitive tearing issues
Benjamin Close (1):
xf86misc extension has been removed, update driver to reflect it
Benjamin Herrenschmidt (3):
atombios: add support for other endians.
Fix console switch on R500
radeon: Fix PCI usage of 32-bit driver on 64-bit platform
Brice Goglin (2):
use PACKAGE_VERSION_* for radeon version
Increase default GART size to 32MB on >=R300
Bryce Harrington (4):
radeon: Fix pasto in connector table setup for vga powerbooks
Add AGP quirk table
Additional AGP quirks
Add another AGP quirk
Calvin Fong (1):
IGP: add support for NTSC tv-out on legacy IGP chips
Corbin Simpson (21):
Add bicubic texture table, as well as the script used to (re)generate it. To regenerate, just run "python bicubic_table.py > bicubic_table.h".
Fixed typos in the bicubic texture tables. Whoops, looks like I'm still asleep.
Allocate memory for the bicubic filter texture.
Upload bicubic filter to card. This was a LOT easier than I had feared, to be honest.
Upload pixel shader to card for r5xx. This was ridiculous. Also it doesn't work yet...
Try to get tex coords from the VAP to RS properly when bicubic filtering is enabled.
Make vertices emit properly.
More bicubic FP buggies.
Finally got the fragment program fully working for bicubic filtering on r5xx.
Fix constants.
Merge upstream changes to vertices, and also add Xv attributes for textured video, including bicubic filtering.
Oops, made a mistake with vertices.
Bump bicubic cutoff to R580.
Force R580-only for bicubic.
Update bicubic tables.
Enable bicubic filtering for all r5xx HW.
Change floats to uint32_t hex.
Switch from 32-bit floats to 16-bit half-floats.
Switch to Mesa-style 24-bit float packing.
r3xx: Various Xv fixes.
Fix indentation on IS_R300_3D Xv code.
Dave Airlie (42):
radeon: drop all use of CPMode.
rotate: fix rotation in conf file.
rv770 initial support
pciid: add radeon HD3850.
atombios: use macro to get offset into table
atombios: fix typo in mode conversion for panel
radeon: make r600 use i2c table lookup for ddc.
radeon: add 0x9441 for hd 4870 x2
radeon: fix powerpc build
radeon: rename radeon_memory to radeon_legacy_memory.
radeon: hopefully fix plls for 30" monitors.
atombios: set missing pixel clock
atombios: oops typo
pciid: add HD3300 - 790GX chipset.
radeon: always align dstPitch to 64 bytes for textured video
r100/r200: EXA misrenders dst == a8 + dst alpha use.
radeon_drm.h: remove kernel defines
radeon: fix HDMI having DACs in some BIOSes
Stability fixes from radeon-gem-cs
Don't mix 2D and 3D in the same IB
radeon: apply atom quirks to object table
radeon: damn you bios, HDMI cannot have DACs.
radeon: memset the pll setting function
r600: don't idle engine
radeon: fixes from Alex for some output engines
DCE32: add support for DCE3.2 digital outputs.
radeon: add initial rv730 pciids.
atombios: fix issue with Clearing of MM_INDEX 0.
atombios: correct fix for previous issue.
atombios: fixup parsing of TV tables on r500 and r600 cards.
atom/tv: fixup the tv out default if bios doesn't specify
atom/tv: enable scaler can set the TV output scaler up.
atom: spc3 only requires ucEncoderMode for DIG outputs
radeon: use latest atombios constants for TV encoders in set_crtc_source
atom/r600: re-enable TV outputs
atombios: re-enable TV dpms
radeon: tv timings have crev/frev wrong way around for some reason.
radeon: add all new pci ids for rv730/rv710 families
radeon: setup 3D engine even when no DRI.
atombios/tv: add an option to enable atom tv-out for users.
radeon: pass distcheck
radeon: update to 6.9.0.91
Dennis Kasprzyk (12):
Fix texture size, texture filter, vertex offsets, etc.
Set helper texture filter correctly.
Implement LPR in one instruction.
Remove uneeded negations.
Heavy optimizations.
Remove one constant.
Smarter usage of the texture semaphore.
Another uneeded SEM_AQUIRE.
Move some ALU instructions after the TEX instructions, so we can do something usefull while we are waiting for the texture values.
Fixed bicubic fragment program comments.
Fix bicubic fp calculation.
Fix typos.
Egbert Eich (1):
Cleanups from rhd port
Eygene Ryabinkin (1):
Catch unsubstituted macro for PCI region base access
Fabio (3):
Fix formatting in man page
Remove duplicate ATI in some device names
man page updates
Joseph Adams (1):
Add more eMac modes, fix crash in last patch
Julien Cristau (2):
Link with -lpciaccess and -ldrm if needed
Bug#7148: Fix manpage formatting
Maciej Cencora (3):
Add needed FP registers, etc. for r3xx bicubic Xv.
Add r3xx-specific bicubic filtering code. FP, RS, mostly, everything else is shared with r5xx.
Enable bicubic Xv on r3xx+. Still some buggies in the actual display, but looks pretty good.
Michel Dänzer (7):
Restore versioning of interface for Mesa DRI driver.
Only declare local variable when it's used.
Call DRM modeset ioctl after the IRQ has been initialized.
Make sure video offerlay offsets don't exceed the hardware limit of 128 MB.
Fix -Werror build.
Update GEN_INT_CNTL register value after calling DRM modeset ioctl.
Pass base offset into RADEONDisplayVideo() explicitly.
Owain Gordon Ainsworth (1):
radeon: don't call ioctl unless DRI is initialised
Patrick Haller (1):
Fix off by one in EXA composite limit checking
Pierre Ossman (10):
Fix comments for R500 fragment shader to reflect the code.
Fix node setup on R300 bicubic pixel shader. It was backwards and used
Fix macros so that they are safe to use with expressions as parameters.
Now that we have a bicubic code path that messes up the pixel shader,
Make the R300 bicubic shader program a bit easier to understand by
Change the XV_BICUBIC attribute to a tristate, where the third state
Switch r200 Xv to use rect lists rather than quads to avoid tearing
Improve tearing avoidance for Xvideo in two steps
Optimise RADEONWaitForVLine
Fix scissor setup for Xv
Ramon van der Stelt (1):
Interlaced mode fixes
Roland Scheidegger (1):
clamp tex coords (r100/r200) for textured video
Wolke Liu (1):
Add pci id for FireMV 2400
git tag: xf86-video-ati-6.9.0.91
http://xorg.freedesktop.org/archive/individual/driver/xf86-video-ati-6.9.0.91.tar.bz2
MD5: ec6eda1fb77cf2a289e31f2b54edd056 xf86-video-ati-6.9.0.91.tar.bz2
SHA1: 710827ccbf2ad3660fde9ad9a8aab91b7820af54 xf86-video-ati-6.9.0.91.tar.bz2
http://xorg.freedesktop.org/archive/individual/driver/xf86-video-ati-6.9.0.91.tar.gz
MD5: b5c547bfbe7a164845fbda6ab482edba xf86-video-ati-6.9.0.91.tar.gz
SHA1: 71a6d1ff9157c7f8ef44ea5537bf165d76bd6e6e xf86-video-ati-6.9.0.91.tar.gz
More information about the xorg
mailing list