Display of Intel G35/X3500 via HDMI on HDTV is shifted to the left
Arjen van der Meijden
acmmailing at tweakers.net
Tue Jan 29 22:33:12 PST 2008
Is there noone with a clue what's going wrong?
Arjen
On 24-1-2008 19:00 Arjen van der Meijden wrote:
> This is the output of xrandr --verbose:
>
> Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 1920 x 1920
> TMDS-1 connected 1920x1080+0+0 (0x5c) normal (normal left inverted right
> x axis y axis) 708mm x 398mm
> Identifier: 0x5b
> Timestamp: 2042559
> Subpixel: horizontal rgb
> Clones:
> CRTC: 0
> CRTCs: 0 1
> EDID_DATA:
> 00ffffffffffff005262050100000000
> 0011010380693b780a0dc9a057479827
> 12484c20000001010101010101010101
> 010101010101023a80d072382d40102c
> 4580c48e2100001e8c0ad09020403120
> 0c405500c48e21000018000000fc0054
> 4f53484942412d54560a2020000000fd
> 00173d0f440f000a202020202020013b
> 1920x1080 (0x5c) 148.5MHz +HSync +VSync
> h: width 1920 start 2448 end 2492 total 2640 skew 0 clock
> 56.2KHz
> v: height 1080 start 1084 end 1089 total 1125 clock
> 50.0Hz
> 720x576 (0x5d) 27.0MHz -HSync -VSync
> h: width 720 start 732 end 796 total 864 skew 0 clock
> 31.2KHz
> v: height 576 start 581 end 586 total 625 clock
> 50.0Hz
> 640x480 (0x5e) 25.2MHz -HSync -VSync
> h: width 640 start 656 end 752 total 800 skew 0 clock
> 31.5KHz
> v: height 480 start 490 end 492 total 525 clock
> 60.0Hz
>
>
> On 24-1-2008 18:33 Jerone Young wrote:
>> When connected what does xrandr --verbose produce?
>>
>> On Jan 24, 2008 10:57 AM, Arjen van der Meijden <acmmailing at tweakers.net> wrote:
>>> Hi list,
>>>
>>> I have a Asus P5E-VM-HDMI mainboard with Intel G35 chipset. I've a
>>> Toshiba 37Z3030 (fullhd) TV connected to it using the HDMI-output.
>>>
>>> Although it more or less works, the image displayed on the TV is shifted
>>> about 35 pixels to the left and 15 pixels to the top (i.e. the upper
>>> left corner of the image is behind the upper left corner of the bezel of
>>> the screen) and on right and bottom side I have blank pixels.
>>>
>>> This happens with Ubuntu Linux 710 Gutsy (Xorg-core 1.3 and intel driver
>>> 2.1.1), the current Hardy version (Intel 2.2.0+git20080107 and Xorg
>>> 1.4.1~git20080118) and today's git-checkout of the Intel driver with
>>> Hardy's Xorg. And using 32bits or 64bits didn't matter, although
>>> currently I'm using 32bits.
>>>
>>> I have currently no modelines or resolution configurations in my
>>> xorg.conf, nor did specifying any help. I couldn't really find earlier
>>> mail in the archive about this issue, except for some remarks that it
>>> was supposedly fixed in 2.2.0/1.4.0.
>>>
>>> As a sidenote I can't seem to get the screen working with 1920x1080 at
>>> 60Hz, X only detects 1920x1080 at 0Hz (and 720x576 and 640x480) and
>>> refuses to operate with any other modeline. The detected frequencies
>>> seem to indicate it operates at 50Hz.
>>>
>>> In windows I was able to select 24, 25, 30, 50 and 60 Hz for 1920x1080
>>> and the image is correctly positioned on the display.
>>>
>>> Best regards,
>>>
>>> Arjen
>>> _______________________________________________
>>> xorg mailing list
>>> xorg at lists.freedesktop.org
>>> http://lists.freedesktop.org/mailman/listinfo/xorg
>>>
> _______________________________________________
> xorg mailing list
> xorg at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/xorg
>
More information about the xorg
mailing list