Unable to clone display on Intel 855GM

markaoki markaoki at navisan.com
Thu Jan 31 09:11:59 PST 2008


I found a handy calculator, maybe it will help?

http://www.raydreams.com/prog/dpi.aspx

I also noticed in your log file:

(EE) intel(0): Output VGA enabled but has no modes
(II) intel(0): Output LVDS using initial mode 1024x768

It seems the server cannot figure out your display with the information 
given.
If you know the range of h & v sync values, maybe that will also help it.

I have no experience at all running a projector from Linux.
Mine is connected to my X-box : )

That all I can offer. Hope you fix it!
-mark


----- Original Message ----- 
From: "Michael Mestre" <michael.mestre at free.fr>
To: <xorg at lists.freedesktop.org>
Sent: Friday, January 25, 2008 9:09 AM
Subject: Unable to clone display on Intel 855GM


> Summary : X boots in 1024x768, ignoring my 800x600 request, on my
> Intel855GM laptop. Also, it will not  let me have my way with the
> "clone" option.
> ---
> Hi,
>
> I would like to ask about a display layout problem on an Intel 855GM (in
> an asus laptop with a native screen res of 1024x768)
> I have a videoprojector with a 800x600 resolution that I want to connect
> to the VGA port of my laptop. My goal for now is to have both the laptop
> LCD and the VGA port running at 800x600 resolution, in clone mode.
> I have Xorg-X11 version 7.2, and I use the i915 driver.
>
> So far, I have been unable to do that : X starts at 1024x768, regardless
> of the resolution specified in xorg.conf
> If I connect the projector to the VGA port, it is indeed cloned, but
> only in 640x480.
> (Strangely enough, it seems that X also ignores my Option "Xinerama"
> "off", and installs the VGA port as a second display ; I haven't checked
> this in detail, but KDE sees two display - one in 1024x768, the other
> one in 640x480 ; the second one being a cropped version of the first).
>
> It is particularly infuriating because I had succeeded in setting this
> up with a previous version of X, maybe a year ago. Since then, I lost
> the xorg config file..
>
> I hope that someone can help me with this.. Thanks a lot in advance..
> Michael
>
> Here's my xorg.conf file (with some unrelevant lines deleted) :
> ------------------------------------------------------------------------------------
> # $XFree86: xc/programs/Xserver/hw/xfree86/XF86Conf.cpp,v 3.44
> 2001/12/17 20:52:29 dawes Exp $
> #
>
> # **********************************************************************
> # Files section.  This allows default font and rgb paths to be set
> # **********************************************************************
>
> Section "Files"
>    [...]
> EndSection
>
> # **********************************************************************
> # Module section -- this is an optional section which is used to specify
> # which run-time loadable modules to load when the X server starts up.
> # **********************************************************************
>
> Section "Module"
>
>    Load "dbe"
>    Load "v4l"
>    Load "glx"
>    Load "dri"
>    Load "synaptics"
>
>    SubSection    "extmod"
>    EndSubSection
>
>    Load    "type1"
>    Load    "freetype"
>
> EndSection
>
> # **********************************************************************
> # Server flags section.  This contains various server-wide Options.
> # **********************************************************************
>
> Section "ServerFlags"
>    Option    "blank time"    "20"    # 20 minutes
>    Option    "off time"    "30"
> EndSection
>
> # **********************************************************************
> # Input devices
> # **********************************************************************
>
> Section "InputDevice"
>    Identifier    "Keyboard1"
>    Driver    "kbd"
>    Option    "AutoRepeat"    "250 30"
>    Option    "XkbModel"    "pc105"
>    Option    "XkbLayout"    "fr"
> EndSection
>
> # **********************************************************************
> # Core Pointer's InputDevice section
> # **********************************************************************
>
> Section "InputDevice"
>    Identifier  "Mouse1"
>    Driver      "mouse"
>    Option    "Device"    "/dev/input/mice"
>    Option      "Protocol"     "ExplorerPS/2"
>    Option      "ZAxisMapping" "4 5"
> EndSection
>
> # **********************************************************************
> # Monitor section
> # **********************************************************************
>
> Section "Monitor"
>    Identifier    "LVDS"
>    Option "DPMS"
>    Option "PreferredMode"  "800x600"
> EndSection
>
> Section "Monitor"
>    Identifier     "VGA"
>      DisplaySize    800 600
>      VendorName     "InFocus"
>      ModelName      "beamer"
>      Option         "DPMS"
>      Option "Enable"  "true"
>    VertRefresh    60
> EndSection
>
> # **********************************************************************
> # Graphics device section
> # **********************************************************************
>
> Section "Device"
>    Identifier    "Intel GPU"
>    Driver    "i810"
>    Option "Clone" "true"
>        Option "MonitorLayout" "VGA,LVDS"
>    Option          "monitor-LVDS" "LVDS"
>    Option          "monitor-VGA" "VGA"
>    Option "FixedPipe"    "LVDS"
> EndSection
>
> # **********************************************************************
> # Screen sections.
> # **********************************************************************
>
> Section "Screen"
>    Identifier "Screen0"
>    Device     "Intel GPU"
>    Monitor    "LVDS"
>    DefaultDepth 24
>
>    SubSection "Display"
>        Depth 24
>        Modes "800x600"
>     EndSubSection
> EndSection
>
> Section "Screen"
>    Identifier "Screen1"
>    Device     "Intel GPU"
>    Monitor    "VGA"
>    DefaultDepth 24
>
>    SubSection "Display"
>        Depth 24
>        Modes "800x600"
>     EndSubSection
> EndSection
>
> # user have RW right to /dev/dri/card0
> Section "DRI"
>       Group        0
>       Mode         0666
> EndSection
>
> # **********************************************************************
> # ServerLayout sections.
> # **********************************************************************
>
> Section "ServerLayout"
>    Identifier    "simple layout"
>    Screen    "Screen 0"
>    Screen    "Screen 1"
>    InputDevice    "Mouse1" "CorePointer"
>    InputDevice "Keyboard1" "CoreKeyboard"
>    Option "Xinerama" "off"
>    Option "Clone" "on"
> EndSection
>
>
> (end of xorg.conf)
> -------------------
>
> Here's the output from /var/log/Xorg.0.log (with some unrelevant lines
> deleted) :
> ---------------------------------------------------------------------------------------------------
>
> X Window System Version 1.3.0
> Release Date: 19 April 2007
> X Protocol Version 11, Revision 0, Release 1.3
> Build Operating System: UNKNOWN
> Current Operating System: Linux pomme 2.6.20-gentoo-r6 #7 SMP Fri Jan 25
> 18:41:04 CET 2008 i686
> Build Date: 24 December 2007
>    Before reporting problems, check http://wiki.x.org
>    to make sure that you have the latest version.
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
>    (++) from command line, (!!) notice, (II) informational,
>    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 25 17:42:59 2008
> (==) Using config file: "/etc/X11/xorg.conf"
> (==) ServerLayout "simple layout"
> (**) |-->Screen "Screen0" (0)
> (**) |   |-->Monitor "LVDS"
> (**) |   |-->Device "Intel GPU"
> (**) |-->Screen "Screen1" (1)
> (**) |   |-->Monitor "VGA"
> (**) |   |-->Device "Intel GPU"
> (**) |-->Input Device "Mouse1"
> (**) |-->Input Device "Keyboard1"
> (WW) The directory "/usr/share/fonts/local/" does not exist.
>    Entry deleted from font path.
> [...]
> (**) FontPath set to:
> [...]
> (==) RgbPath set to "/usr/share/X11/rgb"
> (==) ModulePath set to "/usr/lib/xorg/modules"
> (**) Option "BlankTime" "20"
> (**) Option "OffTime" "30"
> (**) Option "Xinerama" "off"
> (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
> (II) No APM support in BIOS or kernel
> (II) Loader magic: 0x81d9520
> (II) Module ABI versions:
>    X.Org ANSI C Emulation: 0.3
>    X.Org Video Driver: 1.2
>    X.Org XInput driver : 0.7
>    X.Org Server Extension : 0.3
>    X.Org Font Renderer : 0.5
> (II) Loader running on linux
> (II) LoadModule: "pcidata"
> (II) Loading /usr/lib/xorg/modules//libpcidata.so
> (II) Module pcidata: vendor="X.Org Foundation"
>    compiled for 1.3.0, module version = 1.0.0
>    ABI class: X.Org Video Driver, version 1.2
> (--) using VT number 7
>
> (II) PCI: PCI scan (all values are in hex)
> [...]
> (II) PCI: End of PCI scan
> (II) Intel Bridge workaround enabled
> (II) Host-to-PCI bridge:
> (II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
> (II) Bus 0 I/O range:
> [...]
> (--) PCI:*(0:2:0) Intel Corporation 82852/855GM Integrated Graphics
> Device rev 2, Mem @ 0xf0000000/27, 0xfeb80000/19, I/O @ 0xdc00/3
> (--) PCI: (0:2:1) Intel Corporation 82852/855GM Integrated Graphics
> Device rev 2, Mem @ 0xe8000000/27, 0xfea80000/19
> (II) Addressable bus resource ranges are
> [...]
> (II) LoadModule: "dbe"
> (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
> (II) Module dbe: vendor="X.Org Foundation"
>    compiled for 1.3.0, module version = 1.0.0
>    Module class: X.Org Server Extension
>    ABI class: X.Org Server Extension, version 0.3
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "v4l"
> (WW) Warning, couldn't open module v4l
> (II) UnloadModule: "v4l"
> (EE) Failed to load module "v4l" (module does not exist, 0)
> (II) LoadModule: "glx"
> (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
> (II) Module glx: vendor="X.Org Foundation"
>    compiled for 1.3.0, module version = 1.0.0
>    ABI class: X.Org Server Extension, version 0.3
> (==) AIGLX enabled
> (II) Loading extension GLX
> (II) LoadModule: "dri"
> (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
> (II) Module dri: vendor="X.Org Foundation"
>    compiled for 1.3.0, module version = 1.0.0
>    ABI class: X.Org Server Extension, version 0.3
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "synaptics"
> (WW) Warning, couldn't open module synaptics
> (II) UnloadModule: "synaptics"
> (EE) Failed to load module "synaptics" (module does not exist, 0)
> (II) LoadModule: "extmod"
> (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
> (II) Module extmod: vendor="X.Org Foundation"
>    compiled for 1.3.0, module version = 1.0.0
>    Module class: X.Org Server Extension
>    ABI class: X.Org Server Extension, version 0.3
> (II) Loading extension SHAPE
> (II) Loading extension MIT-SUNDRY-NONSTANDARD
> (II) Loading extension BIG-REQUESTS
> (II) Loading extension SYNC
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XC-MISC
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-Misc
> (II) Loading extension XFree86-DGA
> (II) Loading extension DPMS
> (II) Loading extension TOG-CUP
> (II) Loading extension Extended-Visual-Information
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "type1"
> (II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
> (II) Module type1: vendor="X.Org Foundation"
>    compiled for 1.3.0, module version = 1.0.2
>    Module class: X.Org Font Renderer
>    ABI class: X.Org Font Renderer, version 0.5
> (II) Loading font Type1
> (II) LoadModule: "freetype"
> (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
> (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
>    compiled for 1.3.0, module version = 2.1.0
>    Module class: X.Org Font Renderer
>    ABI class: X.Org Font Renderer, version 0.5
> (II) Loading font FreeType
> (II) LoadModule: "i810"
> (II) Loading /usr/lib/xorg/modules/drivers//i810_drv.so
> (II) Module i810: vendor="X.Org Foundation"
>    compiled for 1.3.0, module version = 2.1.1
>    Module class: X.Org Video Driver
>    ABI class: X.Org Video Driver, version 1.2
> (II) LoadModule: "mouse"
> (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
> (II) Module mouse: vendor="X.Org Foundation"
>    compiled for 1.3.0, module version = 1.2.3
>    Module class: X.Org XInput Driver
>    ABI class: X.Org XInput driver, version 0.7
> (II) LoadModule: "kbd"
> (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
> (II) Module kbd: vendor="X.Org Foundation"
>    compiled for 1.3.0, module version = 1.1.0
>    Module class: X.Org XInput Driver
>    ABI class: X.Org XInput driver, version 0.7
> (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
>    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
>    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, 965G, 965Q, 946GZ,
>    965GM, 965GME/GLE, G33, Q35, Q33
> (II) Primary Device is: PCI 00:02:0
> (--) Assigning device section with no busID to primary device
> (--) Assigning device section with no busID to primary device
> (WW) intel: More than one matching Device section found: Intel GPU
> (--) Chipset 852GM/855GM found
> (II) resource ranges after xf86ClaimFixedResources() call:
>    [...]
> (II) Setting vga for screen 0.
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Loading /usr/lib/xorg/modules//libint10.so
> (II) Module int10: vendor="X.Org Foundation"
>    compiled for 1.3.0, module version = 1.0.0
>    ABI class: X.Org Video Driver, version 1.2
> (II) Loading sub module "vbe"
> (II) LoadModule: "vbe"
> (II) Loading /usr/lib/xorg/modules//libvbe.so
> (II) Module vbe: vendor="X.Org Foundation"
>    compiled for 1.3.0, module version = 1.1.0
>    ABI class: X.Org Video Driver, version 1.2
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
> (II) Loading /usr/lib/xorg/modules//libvgahw.so
> (II) Module vgahw: vendor="X.Org Foundation"
>    compiled for 1.3.0, module version = 0.1.0
>    ABI class: X.Org Video Driver, version 1.2
> (**) intel(0): Depth 24, (--) framebuffer bpp 32
> (==) intel(0): RGB weight 888
> (==) intel(0): Default visual is TrueColor
> (II) intel(0): Integrated Graphics Chipset: Intel(R) 852GM
> (--) intel(0): Chipset: "852GM/855GM"
> (--) intel(0): Linear framebuffer at 0xF0000000
> (--) intel(0): IO registers at addr 0xFEB80000
> (II) intel(0): 2 display pipes available.
> (==) intel(0): Using XAA for acceleration
> (--) intel(0): Will try to allocate texture pool for old Mesa 3D driver.
> (II) intel(0): Will try to reserve 32768 kiB of AGP aperture space
>    for the DRM memory manager.
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"(II) Module already built-in
> (II) Loading sub module "i2c"
> (II) LoadModule: "i2c"(II) Module already built-in
> (II) intel(0): Output VGA using monitor section VGA
> (**) intel(0): Option "Enable" "true"
> (II) intel(0): I2C bus "CRTDDC_A" initialized.
> (II) intel(0): Output LVDS using monitor section LVDS
> (**) intel(0): Option "PreferredMode" "800x600"
> (II) intel(0): I2C bus "LVDSDDC_C" initialized.
> (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
> (II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
> (II) intel(0): EDID for output LVDS
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Reloading /usr/lib/xorg/modules//libint10.so
> (II) intel(0): initializing int10
> (WW) intel(0): Bad V_BIOS checksum
> (II) intel(0): Primary V_BIOS segment is: 0xc000
> (II) intel(0): VESA BIOS detected
> (II) intel(0): VESA VBE Version 3.0
> (II) intel(0): VESA VBE Total Mem: 8000 kB
> (II) intel(0): VESA VBE OEM: Intel(r)852GM/852GME/855GM/855GME Graphics
> Chip Accelerated VGA BIOS
> (II) intel(0): VESA VBE OEM Software Rev: 1.0
> (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
> (II) intel(0): VESA VBE OEM Product: Intel(r)852GM/852GME/855GM/855GME
> Graphics Controller
> (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
> (II) intel(0): I2C bus "DVODDC_D" initialized.
> (II) Loading sub module "sil164"
> (II) LoadModule: "sil164"
> (II) Loading /usr/lib/xorg/modules/drivers//sil164.so
> (II) Module sil164: vendor="X.Org Foundation"
>    compiled for 1.3.0, module version = 1.0.0
>    ABI class: X.Org Video Driver, version 1.2
> (II) intel(0): I2C bus "DVOI2C_E" initialized.
> (EE) intel(0): detecting sil164
> (EE) intel(0): Unable to read from DVOI2C_E Slave 112.
> (II) Loading sub module "ch7xxx"
> (II) LoadModule: "ch7xxx"
> (II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
> (II) Module ch7xxx: vendor="X.Org Foundation"
>    compiled for 1.3.0, module version = 1.0.0
>    ABI class: X.Org Video Driver, version 1.2
> (II) intel(0): I2C bus "DVOI2C_E" removed.
> (II) intel(0): I2C bus "DVOI2C_E" initialized.
> (EE) intel(0): Unable to read from DVOI2C_E Slave 236.
> (II) Loading sub module "ivch"
> (II) LoadModule: "ivch"
> (II) Loading /usr/lib/xorg/modules/drivers//ivch.so
> (II) Module ivch: vendor="X.Org Foundation"
>    compiled for 1.3.0, module version = 1.0.0
>    ABI class: X.Org Video Driver, version 1.2
> (II) intel(0): I2C bus "DVOI2C_E" removed.
> (II) intel(0): I2C bus "DVOI2C_B" initialized.
> (EE) intel(0): ivch: Unable to read register 0x00 from DVOI2C_B:04.
> (II) Loading sub module "tfp410"
> (II) LoadModule: "tfp410"
> (II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
> (II) Module tfp410: vendor="X.Org Foundation"
>    compiled for 1.3.0, module version = 1.0.0
>    ABI class: X.Org Video Driver, version 1.2
> (II) intel(0): I2C bus "DVOI2C_B" removed.
> (II) intel(0): I2C bus "DVOI2C_E" initialized.
> (II) intel(0): detecting tfp410
> (EE) intel(0): Unable to read from DVOI2C_E Slave 112.
> (EE) intel(0): tfp410 not detected got VID FFFFFFFF: from DVOI2C_E Slave
> 112.
> (II) intel(0): I2C bus "DVOI2C_E" removed.
> (II) intel(0): I2C bus "DVODDC_D" removed.
> (II) intel(0): Output VGA enabled by config file
> (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
> (II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
> (II) intel(0): EDID for output VGA
> (II) intel(0): Not using default mode "640x350" (vrefresh out of range)
> (II) intel(0): Not using default mode "640x400" (vrefresh out of range)
> (II) intel(0): Not using default mode "720x400" (vrefresh out of range)
> (II) intel(0): Not using default mode "640x480" (vrefresh out of range)
> (II) intel(0): Not using default mode "640x480" (vrefresh out of range)
> (II) intel(0): Not using default mode "640x480" (vrefresh out of range)
> (II) intel(0): Not using default mode "640x480" (vrefresh out of range)
> (II) intel(0): Not using default mode "800x600" (vrefresh out of range)
> (II) intel(0): Not using default mode "800x600" (vrefresh out of range)
> (II) intel(0): Not using default mode "800x600" (vrefresh out of range)
> (II) intel(0): Not using default mode "800x600" (vrefresh out of range)
> (II) intel(0): Not using default mode "800x600" (vrefresh out of range)
> (II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
> (II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
> (II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
> (II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
> (II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
> (II) intel(0): Not using default mode "1280x960" (hsync out of range)
> (II) intel(0): Not using default mode "1280x960" (vrefresh out of range)
> (II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
> (II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
> (II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
> (II) intel(0): Not using default mode "1600x1200" (hsync out of range)
> (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
> (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
> (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
> (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
> (II) intel(0): Not using default mode "1792x1344" (vrefresh out of range)
> (II) intel(0): Not using default mode "1792x1344" (vrefresh out of range)
> (II) intel(0): Not using default mode "1856x1392" (vrefresh out of range)
> (II) intel(0): Not using default mode "1856x1392" (vrefresh out of range)
> (II) intel(0): Not using default mode "1920x1440" (hsync out of range)
> (II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
> (II) intel(0): Not using default mode "832x624" (vrefresh out of range)
> (II) intel(0): Not using default mode "1152x768" (vrefresh out of range)
> (II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
> (II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
> (II) intel(0): Not using default mode "1600x1024" (vrefresh out of range)
> (II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
> (II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
> (II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
> (II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
> (II) intel(0): No remaining probed modes for output VGA
> (II) intel(0): Output LVDS connected
> (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
> (II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
> (II) intel(0): EDID for output LVDS
> (II) intel(0): Not using default mode "1152x864" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "1280x960" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "1280x960" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "1280x1024" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "1280x1024" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "1280x1024" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "1600x1200" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "1600x1200" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "1600x1200" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "1600x1200" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "1600x1200" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "1792x1344" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "1792x1344" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "1856x1392" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "1856x1392" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "1920x1440" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "1920x1440" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "1152x768" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "1400x1050" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "1400x1050" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "1600x1024" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "1920x1440" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "2048x1536" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "2048x1536" (exceeds panel 
> dimensions)
> (II) intel(0): Not using default mode "2048x1536" (exceeds panel 
> dimensions)
> (II) intel(0): Printing probed modes for output LVDS
> (II) intel(0): Modeline "800x600"x85.1   56.30  800 832 896 1048  600
> 601 604 631 +hsync +vsync (53.7 kHz)
> (II) intel(0): Modeline "1024x768"x59.3   64.23  1024 1048 1184 1344
> 768 771 777 806 (47.8 kHz)
> (II) intel(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376
> 768 769 772 808 +hsync +vsync (68.7 kHz)
> (II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312
> 768 769 772 800 +hsync +vsync (60.0 kHz)
> (II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328
> 768 771 777 806 -hsync -vsync (56.5 kHz)
> (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344
> 768 771 777 806 -hsync -vsync (48.4 kHz)
> (II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624
> 625 628 667 -hsync -vsync (49.7 kHz)
> (II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600
> 637 643 666 +hsync +vsync (48.1 kHz)
> (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600
> 601 604 625 +hsync +vsync (46.9 kHz)
> (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600
> 601 605 628 +hsync +vsync (37.9 kHz)
> (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600
> 601 603 625 +hsync +vsync (35.2 kHz)
> (II) intel(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481
> 484 509 -hsync -vsync (43.3 kHz)
> (II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489
> 492 520 -hsync -vsync (37.9 kHz)
> (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481
> 484 500 -hsync -vsync (37.5 kHz)
> (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490
> 492 525 -hsync -vsync (31.5 kHz)
> (II) intel(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401
> 404 446 -hsync +vsync (37.9 kHz)
> (II) intel(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401
> 404 445 -hsync +vsync (37.9 kHz)
> (II) intel(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382
> 385 445 +hsync -vsync (37.9 kHz)
> (II) intel(0): Output VGA enabled by config file
> (II) intel(0): Output LVDS connected
> (EE) intel(0): Output VGA enabled but has no modes
> (II) intel(0): Output LVDS using initial mode 1024x768
> (II) intel(0): Monitoring connected displays enabled
> (II) intel(0): detected 128 kB GTT.
> (II) intel(0): detected 8060 kB stolen memory.
> (==) intel(0): video overlay key set to 0x101fe
> (==) intel(0): Will not try to enable page flipping
> (==) intel(0): Triple buffering disabled
> (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
> (==) intel(0): DPI set to (75, 75)
> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
> (II) Loading /usr/lib/xorg/modules//libfb.so
> (II) Module fb: vendor="X.Org Foundation"
>    compiled for 1.3.0, module version = 1.0.0
>    ABI class: X.Org ANSI C Emulation, version 0.3
> (II) Loading sub module "xaa"
> (II) LoadModule: "xaa"
> (II) Loading /usr/lib/xorg/modules//libxaa.so
> (II) Module xaa: vendor="X.Org Foundation"
>    compiled for 1.3.0, module version = 1.2.0
>    ABI class: X.Org Video Driver, version 1.2
> (II) Loading sub module "ramdac"
> (II) LoadModule: "ramdac"(II) Module already built-in
> (II) intel(0): Comparing regs from server start up to After PreInit
> (==) Depth 24 pixmap format is 32 bpp
> (II) do I need RAC?  No, I don't.
> (II) resource ranges after preInit:
> [...]
> (II) intel(0): Kernel reported 110336 total, 1 used
> (II) intel(0): I830CheckAvailableMemory: 441340 kB available
> (==) intel(0): VideoRam: 131072 KB
> (II) intel(0): Attempting memory allocation with tiled buffers and
>           large DRI memory manager reservation:
> (WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
>    (Cannot allocate memory)
> (II) intel(0): Allocating 5112 scanlines for pixmap cache
> (II) intel(0): Success.
> (II) intel(0): Memory allocation layout:
> [...]
> (II) intel(0): front buffer is not tiled
> (II) intel(0): back buffer is tiled
> (II) intel(0): depth buffer is tiled
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is -1, (No such device)
> drmOpenDevice: open result is -1, (No such device)
> drmOpenDevice: Open failed
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is -1, (No such device)
> drmOpenDevice: open result is -1, (No such device)
> drmOpenDevice: Open failed
> drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 7, (OK)
> drmOpenByBusid: drmOpenMinor returns 7
> drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> (II) intel(0): [drm] loaded kernel module for "i915" driver
> (II) intel(0): [drm] DRM interface version 1.3
> (II) intel(0): [drm] created "i915" driver at busid "pci:0000:00:02.0"
> (II) intel(0): [drm] added 8192 byte SAREA at 0xe0311000
> (II) intel(0): [drm] mapped SAREA 0xe0311000 to 0xb7bd6000
> (II) intel(0): [drm] framebuffer handle = 0xf07f0000
> (II) intel(0): [drm] added 1 reserved context for kernel
> (II) intel(0): Unable to use TTM-based memory manager with DRM version 1.6
> (II) intel(0): [drm] Registers = 0xfeb80000
> (II) intel(0): [drm] ring buffer = 0xf0000000
> (II) intel(0): [drm] init sarea width,height = 1024 x 1024 (pitch 1024)
> (II) intel(0): [drm] Mapping front buffer
> (II) intel(0): [drm] Front Buffer = 0x2e0fe000
> (II) intel(0): [drm] Back Buffer = 0xf2000000
> (II) intel(0): [drm] Depth Buffer = 0xf2400000
> (II) intel(0): [drm] textures = 0xf4800000
> (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
> (II) intel(0): [dri] visual configs initialized
> (II) intel(0): Page Flipping disabled
> (==) intel(0): Write-combining range (0xf0000000,0x8000000)
> (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
> 0x0000
> (II) intel(0): Using XFree86 Acceleration Architecture (XAA)
>    Screen to screen bit blits
>    Solid filled rectangles
>    8x8 mono pattern filled rectangles
>    Indirect CPU to Screen color expansion
>    Solid Horizontal and Vertical Lines
>    Offscreen Pixmaps
>    Setting up tile and stipple cache:
>        32 128x128 slots
>        26 256x256 slots
>        11 512x512 slots
> (==) intel(0): Backing store disabled
> (==) intel(0): Silken mouse enabled
> (II) intel(0): Initializing HW Cursor
> (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007df000 (pgoffset 
> 2015)
> [...]
> (II) intel(0): Output configuration:
> (II) intel(0):   Pipe A is off
> (II) intel(0):   Display plane A is now disabled and connected to pipe A.
> (II) intel(0):   Pipe B is on
> (II) intel(0):   Display plane B is now enabled and connected to pipe B.
> (II) intel(0):   Output VGA is connected to pipe none
> (II) intel(0):   Output LVDS is connected to pipe B
> (**) Option "dpms"
> (**) intel(0): DPMS enabled
> (II) intel(0): Set up overlay video
> (II) intel(0): X context handle = 0x1
> (II) intel(0): [drm] installed DRM signal handler
> (II) intel(0): [DRI] installation complete
> (II) intel(0): [drm] dma control initialized, using IRQ 17
> (II) intel(0): direct rendering: Enabled
> (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled
> message.
> (WW) intel(0): Option "Clone" is not used
> (WW) intel(0): Option "MonitorLayout" is not used
> (WW) intel(0): Option "FixedPipe" is not used
> (WW) intel(0): Option "PreferredMode" is not used
> (--) RandR disabled
> (II) Initializing built-in extension MIT-SHM
> (II) Initializing built-in extension XInputExtension
> (II) Initializing built-in extension XTEST
> (II) Initializing built-in extension XKEYBOARD
> (II) Initializing built-in extension XC-APPGROUP
> (II) Initializing built-in extension XAccessControlExtension
> (II) Initializing built-in extension SECURITY
> (II) Initializing built-in extension XINERAMA
> (II) Initializing built-in extension XFIXES
> (II) Initializing built-in extension XFree86-Bigfont
> (II) Initializing built-in extension RENDER
> (II) Initializing built-in extension RANDR
> (II) Initializing built-in extension COMPOSITE
> (II) Initializing built-in extension DAMAGE
> (II) Initializing built-in extension XEVIE
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 8, (OK)
> drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 8, (OK)
> drmOpenByBusid: drmOpenMinor returns 8
> drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> (WW) AIGLX: 3D driver claims to not support visual 0x23
> [...]
> (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
> (II) GLX: Initialized DRI GL provider for screen 0
> (II) intel(0): Setting screen physical size to 270 x 203
> (**) Option "Protocol" "ExplorerPS/2"
> (**) Mouse1: Device: "/dev/input/mice"
> (**) Mouse1: Protocol: "ExplorerPS/2"
> (**) Option "CorePointer"
> (**) Mouse1: Core Pointer
> (**) Option "Device" "/dev/input/mice"
> (==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
> (**) Option "ZAxisMapping" "4 5"
> (**) Mouse1: ZAxisMapping: buttons 4 and 5
> (**) Mouse1: Buttons: 9
> (**) Mouse1: Sensitivity: 1
> (**) Option "CoreKeyboard"
> (**) Keyboard1: Core Keyboard
> (**) Option "Protocol" "standard"
> (**) Keyboard1: Protocol: standard
> (**) Option "AutoRepeat" "250 30"
> (**) Option "XkbRules" "xorg"
> (**) Keyboard1: XkbRules: "xorg"
> (**) Option "XkbModel" "pc105"
> (**) Keyboard1: XkbModel: "pc105"
> (**) Option "XkbLayout" "fr"
> (**) Keyboard1: XkbLayout: "fr"
> (**) Option "CustomKeycodes" "off"
> (**) Keyboard1: CustomKeycodes disabled
> (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
> (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
> (II) Mouse1: ps2EnableDataReporting: succeeded
> (II) 3rd Button detected: disabling emulate3Button
>
> _______________________________________________
> xorg mailing list
> xorg at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/xorg
> 






More information about the xorg mailing list