ati-6.9.0 unstable dualhead
Alex Deucher
alexdeucher at gmail.com
Tue Jul 1 10:29:34 PDT 2008
On Tue, Jul 1, 2008 at 11:45 AM, Sebastian Glita <glseba at yahoo.com> wrote:
>
> I'm using dualhead an ASUS with ATI Radeon Xpress 1100 200M against a Belinea SVGA monitor.
> The latest version now of xf86-video-ati drives the second monitor in an unstable state of shivering, trembling, flickering very fast (or something like that).
Please try git master. There was a problem with the DAC setup on
RS4xx chips in 6.9.0. I may roll a 6.9.1 soon to pickup the fallout
from 6.9.0 testing.
Alex
>
> Here is the relevant part from /etc/X11/xorg.conf:
>
> <<<
> #
> Section "Module" #
> Load "xaa" #
> Load "GLcore" #
> Load "glx" #
> Load "dri" #
> Load "dbe" #
> Load "vbe" #
> SubSection "extmod" #
> Option "omit XFree86-DGA" #
> EndSubSection #
> Load "bitmap" #
> Load "type1" #
> Load "freetype" #
> Load "record" #
> Load "evdev" #
> Load "fbdevhw" #
> Load "vgahw" #
> Load "int10" #
> EndSection #
> #
> Section "Monitor" #
> Identifier "LCD 15.4'' WXGA" #
> # Option "Enable" "true" #
> Option "DPMS" "on" #
> # Option "Rotate" "normal" #
> # Option "Gamma" "1.0" #
> #
> HorizSync 28.0 - 96.0 #
> VertRefresh 50.0 - 75.0 #
> EndSection #
> #
> Section "Monitor" #
> Identifier "VGA 17'' Belinea" # 10 30 75 (12 17 26) #
> Option "DPMS" "on" #
> Option "Enable" "false" #
> Option "Ignore" "false" #
> ## Option "Rotate" "inverted" #
> ## Option "Gamma" "1.0" #
> #
> HorizSync 31.5 - 64.3 #
> VertRefresh 50.0 - 90.0 #
> #
> ## Modeline "1024x768x84.9" 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync
> EndSection #
> #
> Section "Device" #
> Identifier "RC410 [ATI Radeon Xpress 200M]" #
> Driver "radeon" #
> # Chipset "ATI Radeon XPRESS 200M 5A62 (PCIE)" #
> ChipID 0x5A62 #
> BusID "PCI:1:5:0" #
> #
> Option "Monitor-LVDS" "LCD 15.4'' WXGA" #
> Option "Monitor-VGA-0" "VGA 17'' Belinea" #
> #
> # sw_cursor is needed for some ati and radeon cards #
> ## Option "SW_cursor" "true" #
> Option "DynamicClocks" "on" #
> #
> #0 Option "NoAccel" #
> Option "RenderAccel" "on" #
> Option "AccelMethod" "XAA" #
> Option "XAANoOffscreenPixmaps" "true" #
> #
> Option "BusType" "PCIE" #
> Option "DDCMode" "off" #
> Option "VGAAccess" "on" #
> #
> Option "UseInternalAGPGART" "yes" #
> Option "GARTSize" "64" #
> Option "AGPMode" "4" #
> Option "AGPFastWrite" "1" #
> #
> Option "EnablePageFlip" "1" #
> Option "ColorTiling" "1" #
> Option "SubPixelOrder" "RGB" #
> #
> #! Option "DRI" "false" #
> #
> Option "NoMTRR" "true" #
> #! Option "ModeDebug" "false" #
> Option "Backingstore" "on" #
> EndSection #
>
>>>>
>
> Until the problem can be fixed, I've switched back to =x11-drivers/xf86-video-ati-6.8.0-r1.
>
> Thanks,
> Sjeba
>
>
>
> _______________________________________________
> xorg mailing list
> xorg at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/xorg
>
More information about the xorg
mailing list