FW: Dual Head

[Deepak Bhatia]

Dear Alan,

We tried the settings given below but the dual display is not coming.

We are currently using the HP Laptops nx6120.

Best Regards

Deepak Bhatia

-----Original Message-----
From: Alan Hourihane [mailto:alanh at fairlite.demon.co.uk] 
Sent: Monday, June 02, 2008 6:38 PM
To: Deepak Bhatia
Cc: xorg list; Ashish Jain; Rudradev AC
Subject: Re: FW: Dual Head

Your MonitorLayout should probably be

	Option "MonitorLayout" "CRT,LFP"

or possibly,

	Option "MonitorLayout" "DFP,LFP"

Alan.

On Mon, 2008-06-02 at 17:29 +0530, Deepak Bhatia wrote:
> 
> Dear Alan,
> 
> We have tried the same with X11R7.1 but dual head display is not
> possible. Also expansion is not possible when turn on the xinerama
> option.
> 
> But when I change the "MonitorLayout" following effect we saw. The
> xorg.conf file is attached above.
> 
> 1. If following settings were changed then display was showing on
> laptop.
> 
> Section "Device"
> 	Identifier  "Videocard0"
> 	.
> 	.
> 	Option "MonitorLayout" "LFP,LFP"
> 	.
> EndSection
> 
> Section "Device"
> 	Identifier  "Videocard1"
> 	.
> 	.
> 	Option "MonitorLayout" "LFP,LFP"
> 	.
> EndSection
> 
> 2. If following settings were changed then display was showing on
> Monitor.
> 
> Section "Device"
> 	Identifier  "Videocard0"
> 	.
> 	.
> 	Option "MonitorLayout" "CRT, DFP"
> 	.
> EndSection
> 
> Section "Device"
> 	Identifier  "Videocard1"
> 	.
> 	.
> 	Option "MonitorLayout" "CRT,DFP"
> 	.
> EndSection
> 
> 3. If following settings were changed then display was not showing.
> 
> Section "Device"
> 	Identifier  "Videocard0"
> 	.
> 	.
> 	Option "MonitorLayout" "LFP, DFP"
> 	.
> EndSection
> 
> Section "Device"
> 	Identifier  "Videocard1"
> 	.
> 	.
> 	Option "MonitorLayout" "CRT,DFP"
> 	.
> EndSection
> 
> 
> Thanks & Regards
> 
> Deepak Bhatia
> 
> 
> Disclaimer:
> 
> This message and any attachment(s) contained here are information that
is confidential, proprietary to NEC HCL System Technologies and its
customers. Contents may be privileged or otherwise protected by law. The
information is solely intended for the individual or the entity it is
addressed to. If you are not the intended recipient of this message, you
are not authorized to read, forward, print, retain, copy or disseminate
this message or any part of it. If you have received this e-mail in
error, please notify the sender immediately by return e-mail and delete
it from your computer.


Disclaimer:

This message and any attachment(s) contained here are information that is confidential, proprietary to NEC HCL System Technologies and its customers. Contents may be privileged or otherwise protected by law. The information is solely intended for the individual or the entity it is addressed to. If you are not the intended recipient of this message, you are not authorized to read, forward, print, retain, copy or disseminate this message or any part of it. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete it from your computer.