Autodetection of Resolution of Attached Monitor

[Deepak Bhatia]

Dear All,

 

I have a query related to the autodetection of the resolution of the
attached monitor.

 

http://www.thinkwiki.org/wiki/Xorg_RandR_1.2

 

The above link talks about the autodetecting the attached monitor
resolution as given below.

 

The below commands show that the xrandr1.2 gives the output. 

 

Question: Is it possible to autodetect the same settings in xrandr1.1
which is available with X11R7.1 ?

 

Output of running the xrandr1.2

 

$ xrandr -q 
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 1920 x 1440
VGA disconnected (normal left inverted right)
 LVDS connected 1024x768+0+0 (normal left inverted right) 304mm x 228mm
   1024x768       60.0*+   50.0  
   800x600        60.3  
   640x480        60.0     59.9  
TV disconnected (normal left inverted right)

 

$ xrandr -q 
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 1920 x 1440
VGA connected (normal left inverted right)
   1920x1440 at 60   60.0  
   1920x1440      60.0  
   1600x1200 at 60   60.0  
   1600x1200      60.0  
   1280x960       60.0  
   640x480 at 60     60.0  
LVDS connected 1024x768+0+0 (normal left inverted right) 304mm x 228mm
   1024x768       60.0*+   50.0  
   800x600        60.3  
   640x480        60.0     59.9  
TV disconnected (normal left inverted right)

 

$ xrandr -q 
Screen 0: minimum 320 x 200, current 2624 x 1200, maximum 2624 x 2048
VGA connected 1600x1200+1024+0 (normal left inverted right) 367mm x
275mm
   1600x1200      60.0*+
   1920x1440 at 60   60.0  
   1600x1200 at 60   60.0  
   640x480 at 60     60.0  
   640x480        60.0  
LVDS connected 1024x768+0+0 (normal left inverted right) 304mm x 228mm
   1024x768       60.0*+   50.0  
   800x600        60.3  
   640x480        60.0     59.9  
TV disconnected (normal left inverted right)
 

 



Disclaimer:

This message and any attachment(s) contained here are information that is confidential, proprietary to NEC HCL System Technologies and its customers. Contents may be privileged or otherwise protected by law. The information is solely intended for the individual or the entity it is addressed to. If you are not the intended recipient of this message, you are not authorized to read, forward, print, retain, copy or disseminate this message or any part of it. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete it from your computer.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.x.org/archives/xorg/attachments/20080609/8a960086/attachment.html>