Problems enabling DRI on i810 chipset with xorg-server 1.4.2
Manish Jain
invalid.pointer at gmail.com
Thu Apr 16 20:32:37 PDT 2009
Paul B. Mahol wrote:
> On 4/16/09, Manish Jain <invalid.pointer at gmail.com> wrote:
>
>> I am not sure what the norms are in this forum w.r.t. top-posting. My
>> reply is at the bottom.
>>
>>
>> Paul B. Mahol wrote:
>>
>>> On 4/14/09, Manish Jain <invalid.pointer at gmail.com> wrote:
>>>
>>>
>>>> Hi,
>>>>
>>>> I am running xorg-server 1.4.2 on FreeBSD 7.1 (Release) on a Celeron
>>>> Coppermine 800 MHz + Intel 810 chipset-based system. The xorg
>>>> documentation states that enabling DRI on this chipset just requires the
>>>> colour depth to be set to either 8 or 16 bpp. My xorg.conf uses just one
>>>> screen with the depth set to 16. I am loading the agp module at
>>>> boot-time via loader.conf. But xorg still disables DRI.
>>>>
>>>> Following are some relevant lines from xorg's log :
>>>>
>>>>
>>>>> X.Org X Server 1.4.2
>>>>> Release Date: 11 June 2008
>>>>> (**) intel(0): page flipping disabled
>>>>> (II) intel(0): XvMC is Disabled: use XvMCSurfaces config option to
>>>>> enable.
>>>>> drmOpenDevice: node name is /dev/dri/card0
>>>>> drmOpenDevice: open result is -1, (No such file or directory)
>>>>> drmOpenDevice: open result is -1, (No such file or directory)
>>>>> drmOpenDevice: Open failed
>>>>> drmOpenDevice: node name is /dev/dri/card0
>>>>> drmOpenDevice: open result is -1, (No such file or directory)
>>>>> drmOpenDevice: open result is -1, (No such file or directory)
>>>>> drmOpenDevice: Open failed
>>>>> [drm] failed to load kernel module "i810"
>>>>>
>>>>>
>>> is i915.ko loaded?
>>>
>>>
>>>
>>>>> (EE) [drm] drmOpen failed.
>>>>> (EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
>>>>> (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00000000 (pgoffset 0)
>>>>> (WW) intel(0): xf86AllocateGARTMemory: allocation of 1024 pages failed
>>>>> (Cannot allocate memory)
>>>>>
>>>>>
>>>> Please note there is no directory named /dev/dri on my devfs-enabled
>>>> system.
>>>>
>>>> Here is my /etc/X11/xorg.conf :
>>>>
>>>>
>>>>> Section "Module"
>>>>> Load "dri"
>>>>> Load "glx"
>>>>> Load "extmod"
>>>>> Load "dbe"
>>>>> Load "freetype"
>>>>>
>>>>> SubSection "extmod"
>>>>> Option "omit xfree86-dga"
>>>>> EndSubSection
>>>>> EndSection
>>>>>
>>>>> Section "Files"
>>>>> RgbPath "/usr/local/lib/X11/rgb"
>>>>>
>>>>> FontPath "/usr/local/lib/X11/fonts/misc/"
>>>>> FontPath "/usr/local/lib/X11/fonts/TTF/"
>>>>> FontPath "/usr/local/lib/X11/fonts/OTF"
>>>>> FontPath "/usr/local/lib/X11/fonts/Type1/"
>>>>> FontPath "/usr/local/lib/X11/fonts/100dpi/"
>>>>> FontPath "/usr/local/lib/X11/fonts/75dpi/"
>>>>> FontPath "/usr/local/lib/X11/fonts/bitstream-vera/"
>>>>> FontPath "/usr/local/lib/X11/fonts/cyrillic/"
>>>>> FontPath "/usr/local/lib/X11/fonts/util/"
>>>>> FontPath "/usr/local/share/fonts/cmpsfont/type1"
>>>>>
>>>>> ModulePath "/usr/local/lib/xorg/modules"
>>>>> EndSection
>>>>>
>>>>> Section "ServerFlags"
>>>>> Option "AllowEmptyInput" "off"
>>>>> EndSection
>>>>>
>>>>> Section "InputDevice"
>>>>> Identifier "Keyboard_US_ISO_105"
>>>>> Driver "kbd"
>>>>> Option "AutoRepeat" "500 30"
>>>>> Option "XkbRules" "xorg"
>>>>> Option "XkbModel" "pc105"
>>>>> Option "XkbLayout" "us"
>>>>> EndSection
>>>>>
>>>>> Section "InputDevice"
>>>>> Identifier "Mouse_Logitech_USB_Optical"
>>>>> Driver "mouse"
>>>>> Option "Protocol" "Auto"
>>>>> Option "Device" "/dev/sysmouse"
>>>>> Option "ZAxisMapping" "4 5 6 7"
>>>>> EndSection
>>>>>
>>>>> Section "Monitor"
>>>>> Identifier "Philips105St"
>>>>> HorizSync 31.5 - 48.5
>>>>> VertRefresh 50-90
>>>>> EndSection
>>>>>
>>>>> Section "Device"
>>>>> Identifier "i810_Tomato"
>>>>> Driver "i810"
>>>>> VideoRam 4096
>>>>> EndSection
>>>>>
>>>>> Section "Screen"
>>>>> Identifier "Screen_Only"
>>>>> Device "i810_Tomato"
>>>>> Monitor "Philips105St"
>>>>> DefaultDepth 16
>>>>>
>>>>> Subsection "Display"
>>>>> Depth 16
>>>>> Modes "1024x768"
>>>>> ViewPort 0 0
>>>>> EndSubsection
>>>>> EndSection
>>>>>
>>>>> Section "ServerLayout"
>>>>> Identifier "Layout_Xorg732"
>>>>> Screen "Screen_Only"
>>>>> InputDevice "Mouse_Logitech_USB_Optical" "CorePointer"
>>>>> InputDevice "Keyboard_US_ISO_105" "CoreKeyboard"
>>>>> EndSection
>>>>>
>>>>> Section "DRI"
>>>>> Mode 0666
>>>>> EndSection
>>>>>
>>>>>
>>>> And here is my /boot/loader.conf :
>>>>
>>>>
>>>>> agp_load="YES"
>>>>> drm_load="YES"
>>>>> snd_ich_load="YES"
>>>>> linux_load="YES"
>>>>> linprocfs_load="YES"
>>>>> hint.acpi.0.disabled=0
>>>>> hw.acpi.verbose=1
>>>>>
>>>>>
>>>> Can somebody tell me what the problem is and how do I get to enable DRI
>>>> on my system ? Any help would be greatly appreciated.
>>>>
>>>> --
>>>> Thank you and Regards
>>>> Manish Jain
>>>> invalid.pointer at gmail.com
>>>> +91-99830-62246
>>>>
>>>> NB : Laast year I kudn't spell Software Engineer. Now I are won.
>>>>
>>>> _______________________________________________
>>>> xorg mailing list
>>>> xorg at lists.freedesktop.org
>>>> http://lists.freedesktop.org/mailman/listinfo/xorg
>>>>
>>>>
>>>>
>>>
>>>
>> Hello Paul,
>>
>> Thank you for your reply. I was on the verge of giving up hope.
>>
>>
>>> is i915.ko loaded?
>>>
>>>
>> I had tried loading i915.ko at boot-time (successfully). It makes no
>> difference - DRI remains disabled even with i915.ko loaded. This
>> behaviour is exactly what the developer has programmed for (despite the
>> documentation).
>>
>
> You mean that /dev/dri doesnt appear?
>
>
>> /usr/src/sys/dev/drm/i915_drv.c says :
>>
>>> static drm_pci_id_list_t i915_pciidlist[] = {
>>> i915_PCI_IDS
>>> };
>>>
>> /usr/src/sys/dev/drm/drm_pciids.h in turn says :
>>
>>> #define i915_PCI_IDS \
>>> {0x8086, 0x3577, 0, "Intel i830M GMCH"}, \
>>> {0x8086, 0x2562, 0, "Intel i845G GMCH"}, \
>>> {0x8086, 0x3582, 0, "Intel i852GM/i855GM GMCH"}, \
>>> {0x8086, 0x2572, 0, "Intel i865G GMCH"}, \
>>> {0x8086, 0x2582, 0, "Intel i915G"}, \
>>> {0x8086, 0x2592, 0, "Intel i915GM"}, \
>>> {0x8086, 0x2772, 0, "Intel i945G"}, \
>>> {0x8086, 0x27A2, 0, "Intel i945GM"}, \
>>> {0x8086, 0x2972, 0, "Intel i946GZ"}, \
>>> {0x8086, 0x2982, 0, "Intel i965G"}, \
>>> {0x8086, 0x2992, 0, "Intel i965Q"}, \
>>> {0x8086, 0x29A2, 0, "Intel i965G"}, \
>>> {0x8086, 0x2A02, 0, "Intel i965GM"}, \
>>> {0x8086, 0x2A12, 0, "Intel i965GME"}, \
>>> {0, 0, 0, NULL}
>>>
>>>
>> So what is known as the i810 driver leaves out the i810 chipset itself
>> and begins DRI support with the i830 chipset instead. The reason I write
>> to this forum is that the i810 chipset sold like wildfire and performed
>> like one too. I, probably like many others, am now left staring at the
>> prospect of giving up on a superb system, apart from more than a month's
>> income and countless hours installing and configuring the system, to go
>> in for an overhaul when all this would have been unnecessary had the
>> i810 chipset DRI support not been taken away from the i810 driver.
>>
>> I still hope against hope that xorg considers reviving i810 DRI support
>> soon enough.
>>
>
> And related lspci, pciconf output for your card is?
>
>
Hello Paul,
Thank you for your reply.
With [agp|i915|drm].ko loaded at boot-time and colour depth set to 16 :
1)
> /dev # ls -ld dri
> ls: dri: No such file or directory
2)
> /root # lspci
> 00:00.0 Host bridge: Intel Corporation 82810 GMCH (Graphics Memory
> Controller Hub) (rev 03)
> 00:01.0 VGA compatible controller: Intel Corporation 82810 (CGC)
> Chipset Graphics Controller (rev 03)
> 00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02)
> 00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02)
> 00:1f.1 IDE interface: Intel Corporation 82801AA IDE Controller (rev 02)
> 00:1f.2 USB Controller: Intel Corporation 82801AA USB Controller (rev 02)
> 00:1f.5 Multimedia audio controller: Intel Corporation 82801AA AC'97
> Audio Controller (rev 02)
> 01:0b.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 61)
> 01:0b.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 61)
> 01:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63)
> 01:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ (rev 10)
> 01:0f.0 Communication controller: Rockwell International HCF 56k
> Data/Fax Modem (rev 01)
> /root #
--
Thank you and Regards
Manish Jain
invalid.pointer at gmail.com
+91-99830-62246
NB : Laast year I kudn't spell Software Engineer. Now I are won.
More information about the xorg
mailing list