radeon: different colors on different heads?

[Csillag Kristof]

Christopher Lightfoot írta:
> Ah ah, just realised you said it only has one DMS-59; a little harder
> to test without another splitter.
Indeed.

All I could test was swapping the monitors; that's how I know it's not
the monitor that's broken.
My new splitter is on the way; I will probably get it on mid-week.

I will report back then.

    Kristof

> My NVS440 has two DMS-95 and I tried a bunch of different adapters
> before I found one that had the correct pins - the ones I eventually
> got were from ebay too and have been fine.
>
> Chris
>
> On Fri, Nov 13, 2009 at 12:24 PM, Christopher Lightfoot
> <lightfoot256 at googlemail.com <mailto:lightfoot256 at googlemail.com>> wrote:
>
>     Lol, Hopefully you tried stuff like swapping the monitors around
>     and cables etc to prove it's nothing to do with the splitter? :-p
>
>     The fact you mention certain "bits" are missing definately
>     correlates quite highly with bent/broken pins on the splitter.
>
>     Chris
>
>
>     On Fri, Nov 13, 2009 at 12:13 AM, Alex Deucher
>     <alexdeucher at gmail.com <mailto:alexdeucher at gmail.com>> wrote:
>
>         2009/11/12 Csillag Kristof <csillag.kristof at united-consult.hu
>         <mailto:csillag.kristof at united-consult.hu>>:
>         > Alex Deucher wrote:
>         >
>         >> Is the problematic screen the one driven by DVO or internal
>         tmds?
>         >> Post your Xorg log and specify which output is the
>         problematic one
>         >> (DVI-0 or DVI-1).
>         >
>         > I have attached the log.
>         > The problematic head is DVI-1, which is driven by DVO.
>         >
>         >   * * *
>         >
>         > One naive question: the FireMV 2200 card in question has one
>         DMS-59
>         > slot, which is then divided to two DVI-U ports with a
>         special Y cable.
>         > I have purchased this Y cable separately, from ebay.
>         >
>         > Could it be that the problem is with this Y card?
>
>         Could definitely be a problem with the cable, or a problem
>         with the
>         external tmds transmitter setup.
>
>         Alex
>         _______________________________________________
>         xorg mailing list
>         xorg at lists.freedesktop.org <mailto:xorg at lists.freedesktop.org>
>         http://lists.freedesktop.org/mailman/listinfo/xorg
>
>
>