radeon + intel

[Alex Deucher]

On Fri, Aug 20, 2010 at 5:06 PM, Rolf <rolf at winmutt.com> wrote:
> On a recent upgrade DVI-1 has gone away :
>
> (==) RADEON(1): Depth 24, (--) framebuffer bpp 32
> (II) RADEON(1): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
> (==) RADEON(1): Default visual is TrueColor
> (==) RADEON(1): RGB weight 888
> (II) RADEON(1): Using 8 bits per RGB (8 bit DAC)
> (--) RADEON(1): Chipset: "ATI Radeon HD 4350" (ChipID = 0x954f)
> (II) RADEON(1): PCIE card detected
> (WW) RADEON(1): Color tiling is not yet supported on R600/R700
> (II) RADEON(1): KMS Color Tiling: disabled
> (EE) RADEON(1):  reusing fd for second head
> (II) RADEON(1): Output DIN using monitor section Monitor2
> (II) RADEON(1): EDID for output DIN
> (II) RADEON(1): Output DIN disconnected
> (WW) RADEON(1): No outputs definitely connected, trying again...
> (II) RADEON(1): Output DIN disconnected
> (WW) RADEON(1): Unable to find initial modes
> (II) RADEON(1): mem size init: gart size :1fdff000 vram size: s:40000000
> visible:3f8d4000
> (II) RADEON(1): EXA: Driver will allow EXA pixmaps in VRAM
> (==) RADEON(1): DPI set to (96, 96)
>
>
> How do I force X to use DVI-1 for Monitor2? I tried this in the device
> section per man xorg.conf:
>
>        Option "Monitor-DVI-1" "Monitor2"
>
> Without any luck. I tried using the old working kernel and a new kernel so I
> think this must be the xorg driver itself.
>

Please post your entire xorg log and config and dmesg if you are using kms.

Alex

> -Rolf
>
> On 07/23/2010 06:43 PM, Rolf wrote:
>>
>> Xorg - configure will produce a multihead conf file for me. I can load X
>> with radeon OR intel drives but not both. When loading with both I get no
>> Xorg.0.log file....
>>
>> Suggestions?
>>
>> -Rolf
>
> _______________________________________________
> xorg at lists.freedesktop.org: X.Org support
> Archives: http://lists.freedesktop.org/archives/xorg
> Info: http://lists.freedesktop.org/mailman/listinfo/xorg
> Your subscription address: alexdeucher at gmail.com
>