SILICONMOTION driver programmers please help!!!!
Piotr Lukawski
plukawski at googlemail.com
Wed Mar 24 13:51:14 PDT 2010
Guys,
Have you got any idea about?
Rgds.
Piotr
On 19 March 2010 15:32, Piotr Lukawski <plukawski at googlemail.com> wrote:
> Thanks a lot for your help.
> Please find below Xorg.0.log after Xorg -config /root/xorg.conf -logverbose
> 7:
>
> (II) config/hal: initialized_XSERVTransSocketOpenCOTSServer: Unable to open
> socket for inet6
> _XSERVTransOpen: transport open failed for inet6/casiopea.lukawski.net:0
> _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
>
>
> X.Org X Server 1.6.5
> Release Date: 2009-10-11
> X Protocol Version 11, Revision 0
> Build Operating System: FreeBSD 8.0-RELEASE i386
> Current Operating System: FreeBSD casiopea.lukawski.net 8.0-RELEASE-p2
> FreeBSD 8.0-RELEASE-p2 #2: Wed Mar 10 07:08:19 CET 2010
> root at casiopea.lukawski.net:/usr/obj/usr/src/sys/FIVA i386
>
> Build Date: 06 March 2010 02:03:54PM
>
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 15:17:34 2010
>
> (++) Using config file: "/root/xorg.conf"
> (==) ServerLayout "XFree86 Configured"
> (**) |-->Screen "FIVA Screen" (0)
> (**) | |-->Monitor "FIVA 8.4inch LCD"
> (**) | |-->Device "Silicon Motion Lynx"
> (**) |-->Input Device "FIVA Point"
> (**) |-->Input Device "FIVA Keyboard"
> (**) Option "DontZap" "off"
>
> (**) Option "AllowEmptyInput" "false"
> (==) Automatically adding devices
> (==) Automatically enabling devices
> (**) FontPath set to:
> /usr/local/lib/X11/fonts/misc/,
> /usr/local/lib/X11/fonts/TTF/,
> /usr/local/lib/X11/fonts/OTF,
> /usr/local/lib/X11/fonts/Type1/,
> /usr/local/lib/X11/fonts/100dpi/,
> /usr/local/lib/X11/fonts/75dpi/,
> /usr/local/lib/X11/fonts/misc/,
> /usr/local/lib/X11/fonts/TTF/,
> /usr/local/lib/X11/fonts/OTF,
> /usr/local/lib/X11/fonts/Type1/,
> /usr/local/lib/X11/fonts/100dpi/,
> /usr/local/lib/X11/fonts/75dpi/
> (**) ModulePath set to "/usr/local/lib/xorg/modules"
>
> (II) Loader magic: 0x6a0
> (II) Module ABI versions:
> X.Org ANSI C Emulation: 0.4
> X.Org Video Driver: 5.0
> X.Org XInput driver : 4.0
> X.Org Server Extension : 2.0
> (II) Loader running on freebsd
> (--) Using syscons driver with X support (version 2.0)
> (--) using VT number 9
>
> (--) PCI:*(0:0:9:0) 126f:0712:126f:0712 Silicon Motion, Inc. SM712 LynxEM+
> rev 160, Mem @ 0xfd000000/16777216, BIOS @ 0x????????/65536
> (II) System resource ranges:
> [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) "extmod" will be loaded. This was enabled by default and also
> specified in the config file.
> (II) "dbe" will be loaded. This was enabled by default and also specified
> in the config file.
> (II) "glx" will be loaded. This was enabled by default and also specified
> in the config file.
> (II) "record" will be loaded. This was enabled by default and also
> specified in the config file.
> (II) "dri" will be loaded. This was enabled by default and also specified
> in the config file.
> (II) "dri2" will be loaded. This was enabled by default and also specified
> in the config file.
> (II) LoadModule: "dbe"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
> (II) Module dbe: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "dri"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
> (II) Module dri: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.0.0
> ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "dri2"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
> (II) Module dri2: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.1.0
> ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension DRI2
> (II) LoadModule: "extmod"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
> (II) Module extmod: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-DGA
> (II) Loading extension DPMS
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "glx"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
> (II) Module glx: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.0.0
> ABI class: X.Org Server Extension, version 2.0
> (==) AIGLX disabled
> (II) Loading extension GLX
> (II) LoadModule: "record"
> (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
> (II) Module record: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.13.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension RECORD
> (II) LoadModule: "siliconmotion"
> (II) Loading /usr/local/lib/xorg/modules/drivers//siliconmotion_drv.so
> (II) Module siliconmotion: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.7.3
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 5.0
> (II) LoadModule: "mouse"
> (II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so
> (II) Module mouse: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.4.0
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 4.0
> (II) LoadModule: "kbd"
> (II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so
> (II) Module kbd: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.3.2
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 4.0
>
> (II) SMI: driver (version 1.7.3) for Silicon Motion Lynx chipsets: Lynx,
> LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM, Cougar3DR, MSOC
> (II) Primary Device is: PCI 00 at 00:09:0
> (WW) Falling back to old probe method for siliconmotion
> (**) Chipset override: lynxem+
> (**) Chipset LynxEM+ found
> (II) resource ranges after xf86ClaimFixedResources() call:
> [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) resource ranges after probing:
> [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
> (II) Setting vga for screen 0.
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
> (II) Loading /usr/local/lib/xorg/modules//libvgahw.so
> (II) Module vgahw: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 0.1.0
>
> ABI class: X.Org Video Driver, version 5.0
> SMI_PreInit vgaCRIndex=4, vgaIOBase=0, MMIOBase=0x0
>
> (**) SMI(0): Depth 16, (--) framebuffer bpp 16
> (==) SMI(0): RGB weight 565
> (==) SMI(0): Default visual is TrueColor
> (**) SMI(0): Option "pci_burst" "on"
> (**) SMI(0): Option "SWCursor" "true"
> (**) SMI(0): Option "UseBIOS" "off"
> (**) SMI(0): PCI Burst enabled
> (==) SMI(0): PCI Retry enabled
> (**) SMI(0): Using Software Cursor
> (**) SMI(0): Option: UseBIOS disabled.
> (**) SMI(0): Chipset: "lynxem+"
> (==) SMI(0): Dual head disabled
> (==) SMI(0): Using XAA acceleration architecture
> (II) SMI(0): Physical MMIO at 0xFD400000
> (II) SMI(0): Logical MMIO at 0x28c00000 - 0x28ffffff
> (II) SMI(0): DPR=0x28c08000, VPR=0x28c0c000, IOBase=0x28f00000
> (II) SMI(0): DataPort=0x28c00000 - 0x28c07fff
> (--) SMI(0): videoram: 4096kB
> (II) SMI(0): Physical frame buffer at 0xFD000000 offset: 0x00000000
> (II) SMI(0): Logical frame buffer at 0x29000000 - 0x293fffff
> (II) SMI(0): Cursor Offset: 003FFC00
>
> (II) SMI(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
> 0x0000
> (II) SMI(0): Reserved: 003FF800
>
> (II) SMI(0): TFT Panel Size = 800x600
> (II) Loading sub module "i2c"
> (II) LoadModule: "i2c"
> (II) Module "i2c" already built-in
> (II) SMI(0): I2C bus "I2C bus" initialized.
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Module "ddc" already built-in
> (==) SMI(0): Using gamma correction (1.0, 1.0, 1.0)
> (II) SMI(0): MCLK = 157.000
> (II) SMI(0): Output LVDS using monitor section FIVA 8.4inch LCD
> (II) SMI(0): Output LVDS connected
> (II) SMI(0): Using user preference for initial modes
> (II) SMI(0): Output LVDS using initial mode 800x600
> (==) SMI(0): DPI set to (96, 96)
> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
> (II) Loading /usr/local/lib/xorg/modules//libfb.so
> (II) Module fb: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.0.0
> ABI class: X.Org ANSI C Emulation, version 0.4
> (II) Loading sub module "xaa"
> (II) LoadModule: "xaa"
> (II) Loading /usr/local/lib/xorg/modules//libxaa.so
> (II) Module xaa: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.2.1
>
> ABI class: X.Org Video Driver, version 5.0
> (II) do I need RAC? No, I don't.
> (II) resource ranges after preInit:
> [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
> (II) SMI(0): Physical MMIO at 0xFD400000
> (II) SMI(0): Logical MMIO at 0x28c00000 - 0x28ffffff
> (II) SMI(0): DPR=0x28c08000, VPR=0x28c0c000, IOBase=0x28f00000
> (II) SMI(0): DataPort=0x28c00000 - 0x28c07fff
> (II) SMI(0): Physical frame buffer at 0xFD000000 offset: 0x00000000
> (II) SMI(0): Logical frame buffer at 0x29000000 - 0x293fffff
> (II) SMI(0): Cursor Offset: 003FFC00
>
> (II) SMI(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
> 0x0000
> (II) SMI(0): Reserved: 003FF800
> (II) SMI(0): Saved current video mode. Register dump:
> (II) SMI(0): START register dump ------------------
> MISCELLANEOUS OUTPUT
> 67
>
> SEQUENCER
> x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
> 00| 03 00 03 00 02 24 24 24 24 24 24 24 24 24 24 24
> 10| 40 01 10 00 00 0A 17 00 51 00 00 00 00 00 00 00
> 20| C4 30 02 00 01 00 00 00 00 00 00 00 00 00 00 00
> 30| 24 03 20 09 C0 24 24 24 24 24 24 24 00 00 03 FF
> 40| 00 FC 00 00 20 18 00 FC 20 0C 44 20 00 24 24 24
> 50| 04 48 83 63 68 73 57 58 04 03 7B 24 24 00 00 24
> 60| 01 00 3E 1A 1A 00 20 00 50 04 12 02 1C 85 0B 04
> 70| 82 41 3F 35 04 00 24 24 24 24 24 24 24 24 24 24
> 80| FF 03 00 00 12 58 00 24 89 01 25 01 00 FF 24 24
> 90| 00 00 00 00 24 24 24 24 24 24 24 24 24 24 24 24
> A0| 00 00 00 2D C1 ED ED ED 01 07 46 08 81 37 28 40
>
> CRT CONTROLLER
> x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
> 00| 5F 4F 50 02 53 81 BF 1F 00 4F 00 0F 00 00 FF FF
> 10| 9C 0E 8F 28 1F 96 B9 A3 FF 00 00 00 00 00 00 00
> 30| 00 00 00 00 00 88 02 20 00 00 28 40 00 00 11 00
> 40| 7F 63 00 6B 1B 72 57 00 58 0C A2 20 4F 8F 00 00
> 90| 56 4A 5E 55 86 9D 8E AA 8A A3 DF 33 00 00 1B 00
> A0| 20 1F 1A 19 19 0F 0F 0A 00 00 00 00 00 00
>
> GRAPHICS CONTROLLER
> x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
> 00| 00 00 00 00 00 10 0E 00 FF
>
> ATTRIBUTE 0CONTROLLER
> x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
> 00| 00 01 02 03 04 05 14 07 38 39 3A 3B 3C 3D 3E 3F
> 10| 0C 00 0F 08 00
>
> DPR x0 x4 x8 xC
> 00| C000C000 F000F000 F320C258 000000F0
> 10| F320F320 FF000000 FFFEFEFE C0D4F000
> 20| FF000000 FFFFFFFF FFFFFFFF F000C000
> 30| F320F320 77DDBBEE 77DDBBEE F320F320
> 40| FFF00000 FFF00000
>
> VPR x0 x4 x8 xC
> 00| 00020000 0000000F 00000000 00000000
> 10| 01420140 02E306E2 03F70200 0000A5C0
> 20| 02F30005 00000000 011A013E 022D0243
> 30| 0007386C 00020001 00000000 00000000
> 40| 00000000 00000000 00000000 00000000
> 50| 00000000 01026543 00000542 00EDEDED
> 60| 000001BE
>
> CPR x0 x4 x8 xC
> 00| 00000008 00000004 00000010 00041441
> 10| 00006200 00000141 00000006
>
>
> (II) SMI(0): END register dump --------------------
>
> (II) SMI(0): DPMS enabled
> (II) SMI(0): I2C device "I2C bus:SAA 7111A" registered at address 0x48.
> (II) SMI(0): I2C device "I2C bus:SAA 7111A" removed.
> (II) SMI(0): RandR 1.2 enabled, ignore the following RandR disabled
> message.
> (WW) SMI(0): Option "fifo_conservative" is not used
> (--) RandR disabled
> (II) Setting vga for screen 0.
> (II) Initializing built-in extension Generic Event Extension
> (II) Initializing built-in extension SHAPE
> (II) Initializing built-in extension MIT-SHM
> (II) Initializing built-in extension XInputExtension
> (II) Initializing built-in extension XTEST
> (II) Initializing built-in extension BIG-REQUESTS
> (II) Initializing built-in extension SYNC
> (II) Initializing built-in extension XKEYBOARD
> (II) Initializing built-in extension XC-MISC
> (II) Initializing built-in extension XINERAMA
> (II) Initializing built-in extension XFIXES
> (II) Initializing built-in extension RENDER
> (II) Initializing built-in extension RANDR
> (II) Initializing built-in extension COMPOSITE
> (II) Initializing built-in extension DAMAGE
> (II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so
> (II) GLX: Initialized DRISWRAST GL provider for screen 0
> (II) SMI(0): Setting screen physical size to 211 x 158
> [dix] Could not init font path element <80>, removing from list!
> (**) Option "Protocol" "Auto"
> (**) FIVA Point: Device: "/dev/sysmouse"
> (**) FIVA Point: Protocol: "Auto"
> (**) Option "CorePointer"
> (**) FIVA Point: always reports core events
> (**) Option "Device" "/dev/sysmouse"
> (==) FIVA Point: Emulate3Buttons, Emulate3Timeout: 50
> (**) FIVA Point: ZAxisMapping: buttons 4 and 5
> (**) FIVA Point: Buttons: 9
> (**) Option "SampleRate" "600"
> (**) FIVA Point: SampleRate: 600
> (**) FIVA Point: Sensitivity: 1
> (II) XINPUT: Adding extended input device "FIVA Point" (type: MOUSE)
> (**) FIVA Point: (accel) keeping acceleration scheme 1
> (**) FIVA Point: (accel) filter chain progression: 2.00
> (**) FIVA Point: (accel) filter stage 0: 20.00 ms
> (**) FIVA Point: (accel) set acceleration profile 0
> (**) Option "Device" "/dev/sysmouse"
>
> (II) FIVA Point: SetupAuto: hw.iftype is 4, hw.model is 0
> (II) FIVA Point: SetupAuto: protocol is SysMouse
> (**) Option "CoreKeyboard"
> (**) FIVA Keyboard: always reports core events
> (**) Option "Protocol" "standard"
> (**) FIVA Keyboard: Protocol: standard
> (**) Option "AutoRepeat" "500 30"
> (**) Option "XkbRules" "xorg"
> (**) FIVA Keyboard: XkbRules: "xorg"
> (**) Option "XkbModel" "pc105"
> (**) FIVA Keyboard: XkbModel: "pc105"
> (**) Option "XkbLayout" "us"
> (**) FIVA Keyboard: XkbLayout: "us"
> (**) Option "CustomKeycodes" "off"
> (**) FIVA Keyboard: CustomKeycodes disabled
> (II) XINPUT: Adding extended input device "FIVA Keyboard" (type: KEYBOARD)
> (II) config/hal: Adding input device AT Keyboard
> (**) AT Keyboard: always reports core events
> (**) Option "Protocol" "standard"
> (**) AT Keyboard: Protocol: standard
> (**) Option "AutoRepeat" "500 30"
> (**) Option "XkbRules" "xorg"
> (**) AT Keyboard: XkbRules: "xorg"
> (**) Option "XkbModel" "pc105"
> (**) AT Keyboard: XkbModel: "pc105"
> (**) Option "XkbLayout" "us"
> (**) AT Keyboard: XkbLayout: "us"
> (**) Option "CustomKeycodes" "off"
> (**) AT Keyboard: CustomKeycodes disabled
> (II) XINPUT: Adding extended input device "AT Keyboard" (type: KEYBOARD)
> (II) config/hal: Adding input device PS/2 Mouse
> (**) PS/2 Mouse: Device: "/dev/psm0"
> (==) PS/2 Mouse: Protocol: "Auto"
> (**) PS/2 Mouse: always reports core events
> (**) Option "Device" "/dev/psm0"
> (==) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 50
> (**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5
> (**) PS/2 Mouse: Buttons: 9
> (**) PS/2 Mouse: Sensitivity: 1
> (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
> (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
> (**) PS/2 Mouse: (accel) filter chain progression: 2.00
> (**) PS/2 Mouse: (accel) filter stage 0: 20.00 ms
> (**) PS/2 Mouse: (accel) set acceleration profile 0
> (**) Option "Device" "/dev/psm0"
>
> (II) PS/2 Mouse: SetupAuto: hw.iftype is 3, hw.model is 0
> (II) PS/2 Mouse: SetupAuto: protocol is PS/2
> (II) PS/2 Mouse: ps2EnableDataReporting: succeeded
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.x.org/archives/xorg/attachments/20100324/66ce4cf7/attachment.html>
More information about the xorg
mailing list