(EE) [drm] drmOpen failed
courten at web.de
courten at web.de
Wed Oct 19 02:37:37 PDT 2011
Just a try
Remove /etc/x11/xorg.conf
Start x without xorg.conf
Then post your logfile
>jh_wang2004 <jh_wang2004 at 163.com>
>Wed Oct 19 11:29:14 CEST 2011
>xorg at lists.freedesktop.org
>(EE) [drm] drmOpen failed
>
>
>
>
>
>-------- Forwarding messages --------
>From: jh_wang2004 <jh_wang2004 at 163.com>
>Date: 2011-10-19 17:13:57
>To:ubuntu-users at lists.ubuntu.com
>Subject: (EE) [drm] drmOpen failed
>
> hi all:
> I use ubuntu9.04, my video card is intel G41. in the xorg.0.log shows
>/******************************************************************************************************************************************************/
>X.Org X Server 1.6.0
>Release Date: 2009-2-25
>X Protocol Version 11, Revision 0
>Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
>Current Operating System: Linux opr-desktop 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 i686
>Build Date: 09 April 2009 02:10:02AM
>xorg-server 2:1.6.0-0ubuntu14 (buildd at rothera.buildd)
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
>Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 19 16:20:51 2011
>(==) Using config file: "/etc/X11/xorg.conf"
>(==) No Layout section. Using the first Screen section.
>(**) |-->Screen "Default Screen" (0)
>(**) | |-->Monitor "Configured Monitor"
>(**) | |-->Device "Configured Video Device"
>(==) Automatically adding devices
>(==) Automatically enabling devices
>(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
> Entry deleted from font path.
>(==) FontPath set to:
> /usr/share/fonts/X11/misc,
> /usr/share/fonts/X11/100dpi/:unscaled,
> /usr/share/fonts/X11/75dpi/:unscaled,
> /usr/share/fonts/X11/Type1,
> /usr/share/fonts/X11/100dpi,
> /usr/share/fonts/X11/75dpi,
> /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
> built-ins
>(==) ModulePath set to "/usr/lib/xorg/modules"
>(II) Cannot locate a core pointer device.
>(II) Cannot locate a core keyboard device.
>(II) The server relies on HAL to provide the list of input devices.
> If no devices become available, reconfigure HAL or disable AllowEmptyInput.
>(II) Loader magic: 0x3bc0
>(II) Module ABI versions:
> X.Org ANSI C Emulation: 0.4
> X.Org Video Driver: 5.0
> X.Org XInput driver : 4.0
> X.Org Server Extension : 2.0
>(II) Loader running on linux
>(++) using VT number 7
>
>(--) PCI:*(0 at 0:2:0) Intel Corporation 4 Series Chipset Integrated Graphics Controller rev 3, Mem @ 0xfe800000/4194304, 0xd0000000/268435456, I/O @ 0x0000ecd8/8
>(II) Open ACPI successful (/var/run/acpid.socket)
>(II) System resource ranges:
> [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
>(II) LoadModule: "extmod"
>(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
>(II) Module extmod: vendor="X.Org Foundation"
> compiled for 1.6.0, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension MIT-SCREEN-SAVER
>(II) Loading extension XFree86-VidModeExtension
>(II) Loading extension XFree86-DGA
>(II) Loading extension DPMS
>(II) Loading extension XVideo
>(II) Loading extension XVideo-MotionCompensation
>(II) Loading extension X-Resource
>(II) LoadModule: "dbe"
>(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
>(II) Module dbe: vendor="X.Org Foundation"
> compiled for 1.6.0, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension DOUBLE-BUFFER
>(II) LoadModule: "glx"
>(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
>(II) Module glx: vendor="X.Org Foundation"
> compiled for 1.6.0, module version = 1.0.0
> ABI class: X.Org Server Extension, version 2.0
>(==) AIGLX enabled
>(II) Loading extension GLX
>(II) LoadModule: "record"
>(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
>(II) Module record: vendor="X.Org Foundation"
> compiled for 1.6.0, module version = 1.13.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension RECORD
>(II) LoadModule: "dri"
>(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
>(II) Module dri: vendor="X.Org Foundation"
> compiled for 1.6.0, module version = 1.0.0
> ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension XFree86-DRI
>(II) LoadModule: "dri2"
>(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
>(II) Module dri2: vendor="X.Org Foundation"
> compiled for 1.6.0, module version = 1.0.0
> ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension DRI2
>(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
>(II) Matched intel from file name intel.ids
>(==) Matched intel for the autoconfigured driver
>(==) Assigned the driver to the xf86ConfigLayout
>(II) LoadModule: "intel"
>(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
>(II) Module intel: vendor="X.Org Foundation"
> compiled for 1.6.0, module version = 2.6.3
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 5.0
>(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
> i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
> E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
> 965GM, 965GME/GLE, G33, Q35, Q33,
> Mobile Intel® GM45 Express Chipset,
> Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
>(II) Primary Device is: PCI 00 at 00:02:0
>(II) resource ranges after xf86ClaimFixedResources() call:
> [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
>(II) resource ranges after probing:
> [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
> [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
>(II) Loading sub module "vgahw"
>(II) LoadModule: "vgahw"
>(II) Loading /usr/lib/xorg/modules//libvgahw.so
>(II) Module vgahw: vendor="X.Org Foundation"
> compiled for 1.6.0, module version = 0.1.0
> ABI class: X.Org Video Driver, version 5.0
>(II) intel(0): Creating default Display subsection in Screen section
> "Default Screen" for depth/fbbpp 24/32
>(==) intel(0): Depth 24, (--) framebuffer bpp 32
>(==) intel(0): RGB weight 888
>(==) intel(0): Default visual is TrueColor
>(II) intel(0): Integrated Graphics Chipset: Intel(R) G41
>(--) intel(0): Chipset: "G41"
>(--) intel(0): Linear framebuffer at 0xD0000000
>(--) intel(0): IO registers at addr 0xFE800000
>(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
>(==) intel(0): Using EXA for acceleration
>(II) intel(0): 2 display pipes available.
>(II) Loading sub module "ddc"
>(II) LoadModule: "ddc"
>(II) Module "ddc" already built-in
>(II) Loading sub module "i2c"
>(II) LoadModule: "i2c"
>(II) Module "i2c" already built-in
>(II) intel(0): Output VGA using monitor section Configured Monitor
>(II) intel(0): Resizable framebuffer: not available (1 3)
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "DEL", prod id 41054
>(II) intel(0): Using EDID range info for horizontal sync
>(II) intel(0): Using EDID range info for vertical refresh
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
>(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
>(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
>(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
>(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
>(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
>(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
>(II) intel(0): EDID vendor "DEL", prod id 41054
>(II) intel(0): Output VGA connected
>(II) intel(0): Using exact sizes for initial modes
>(II) intel(0): Output VGA using initial mode 1920x1080
>(II) intel(0): detected 512 kB GTT.
>(II) intel(0): detected 32764 kB stolen memory.
>(==) intel(0): video overlay key set to 0x101fe
>(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
>(**) intel(0): Display dimensions: (510, 290) mm
>(**) intel(0): DPI set to (95, 168)
>(II) Loading sub module "fb"
>(II) LoadModule: "fb"
>(II) Loading /usr/lib/xorg/modules//libfb.so
>(II) Module fb: vendor="X.Org Foundation"
> compiled for 1.6.0, module version = 1.0.0
> ABI class: X.Org ANSI C Emulation, version 0.4
>(II) Loading sub module "exa"
>(II) LoadModule: "exa"
>(II) Loading /usr/lib/xorg/modules//libexa.so
>(II) Module exa: vendor="X.Org Foundation"
> compiled for 1.6.0, module version = 2.4.0
> ABI class: X.Org Video Driver, version 5.0
>(II) Loading sub module "ramdac"
>(II) LoadModule: "ramdac"
>(II) Module "ramdac" already built-in
>(II) intel(0): Comparing regs from server start up to After PreInit
>(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000320 to 0x00000020
>(==) Depth 24 pixmap format is 32 bpp
>(II) do I need RAC? No, I don't.
>(II) resource ranges after preInit:
> [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
> [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
> [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
> [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
> [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
> [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
>(II) intel(0): Kernel reported 482560 total, 1 used
>(II) intel(0): I830CheckAvailableMemory: 1930236 kB available
>(WW) intel(0): DRI2 requires UXA
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenByBusid: Searching for BusID pci:0000:00:02.0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card1
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card2
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card3
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card4
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card5
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card6
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card7
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card8
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card9
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card10
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card11
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card12
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card13
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card14
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: node name is /dev/dri/card1
>drmOpenDevice: node name is /dev/dri/card2
>drmOpenDevice: node name is /dev/dri/card3
>drmOpenDevice: node name is /dev/dri/card4
>drmOpenDevice: node name is /dev/dri/card5
>drmOpenDevice: node name is /dev/dri/card6
>drmOpenDevice: node name is /dev/dri/card7
>drmOpenDevice: node name is /dev/dri/card8
>drmOpenDevice: node name is /dev/dri/card9
>drmOpenDevice: node name is /dev/dri/card10
>drmOpenDevice: node name is /dev/dri/card11
>drmOpenDevice: node name is /dev/dri/card12
>drmOpenDevice: node name is /dev/dri/card13
>drmOpenDevice: node name is /dev/dri/card14
>(EE) [drm] drmOpen failed.
>(EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
>(**) intel(0): Framebuffer compression disabled
>(**) intel(0): Tiling enabled
>(==) intel(0): VideoRam: 262144 KB
>(II) intel(0): Attempting memory allocation with tiled buffers.
>(II) intel(0): Tiled allocation successful.
>(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
>(II) EXA(0): Offscreen pixmap area of 44236800 bytes
>(II) EXA(0): Driver registered support for the following operations:
>(II) Solid
>(II) Copy
>(II) Composite (RENDER acceleration)
>(==) intel(0): Backing store disabled
>(==) intel(0): Silken mouse enabled
>(II) intel(0): Initializing HW Cursor
>(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01fff000 (pgoffset 8191)
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
>(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
>(II) intel(0): 0x0002a000-0x00129fff: fake bufmgr (1024 kB)
>(II) intel(0): 0x0012a000-0x00f39fff: front buffer (14400 kB)
>(II) intel(0): 0x00f3a000-0x03969fff: exa offscreen (43200 kB)
>(II) intel(0): 0x10000000: end of aperture
>(II) intel(0): Output configuration:
>(II) intel(0): Pipe A is on
>(II) intel(0): Display plane A is now enabled and connected to pipe A.
>(II) intel(0): Pipe B is off
>(II) intel(0): Display plane B is now disabled and connected to pipe B.
>(II) intel(0): Output VGA is connected to pipe A
>(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
>(II) intel(0): DPMS enabled
>(==) intel(0): Intel XvMC decoder disabled
>(II) intel(0): Set up textured video
>(II) intel(0): direct rendering: Failed
>(--) RandR disabled
>(II) Initializing built-in extension Generic Event Extension
>(II) Initializing built-in extension SHAPE
>(II) Initializing built-in extension MIT-SHM
>(II) Initializing built-in extension XInputExtension
>(II) Initializing built-in extension XTEST
>(II) Initializing built-in extension BIG-REQUESTS
>(II) Initializing built-in extension SYNC
>(II) Initializing built-in extension XKEYBOARD
>(II) Initializing built-in extension XC-MISC
>(II) Initializing built-in extension SECURITY
>(II) Initializing built-in extension XINERAMA
>(II) Initializing built-in extension XFIXES
>(II) Initializing built-in extension RENDER
>(II) Initializing built-in extension RANDR
>(II) Initializing built-in extension COMPOSITE
>(II) Initializing built-in extension DAMAGE
>(II) AIGLX: Screen 0 is not DRI2 capable
>(II) AIGLX: Screen 0 is not DRI capable
>(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
>(II) GLX: Initialized DRISWRAST GL provider for screen 0
>(II) intel(0): Setting screen physical size to 509 x 286
>(II) config/hal: Adding input device Macintosh mouse button emulation
>(II) LoadModule: "evdev"
>(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
>(II) Module evdev: vendor="X.Org Foundation"
> compiled for 1.6.0, module version = 2.1.1
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 4.0
>(**) Macintosh mouse button emulation: always reports core events
>(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
>(II) Macintosh mouse button emulation: Found 3 mouse buttons
>(II) Macintosh mouse button emulation: Found x and y relative axes
>(II) Macintosh mouse button emulation: Configuring as mouse
>(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
>(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
>(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
>(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
>(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
>(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
>(II) config/hal: Adding input device LITE-ON Technology USB NetVista Full Width Keyboard.
>(**) LITE-ON Technology USB NetVista Full Width Keyboard.: always reports core events
>(**) LITE-ON Technology USB NetVista Full Width Keyboard.: Device: "/dev/input/event4"
>(II) LITE-ON Technology USB NetVista Full Width Keyboard.: Found keys
>(II) LITE-ON Technology USB NetVista Full Width Keyboard.: Configuring as keyboard
>(II) XINPUT: Adding extended input device "LITE-ON Technology USB NetVista Full Width Keyboard." (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) LITE-ON Technology USB NetVista Full Width Keyboard.: xkb_rules: "evdev"
>(**) Option "xkb_model" "pc105"
>(**) LITE-ON Technology USB NetVista Full Width Keyboard.: xkb_model: "pc105"
>(**) Option "xkb_layout" "cn"
>(**) LITE-ON Technology USB NetVista Full Width Keyboard.: xkb_layout: "cn"
>(II) config/hal: Adding input device Logitech USB Optical Mouse
>(**) Logitech USB Optical Mouse: always reports core events
>(**) Logitech USB Optical Mouse: Device: "/dev/input/event3"
>(II) Logitech USB Optical Mouse: Found 8 mouse buttons
>(II) Logitech USB Optical Mouse: Found x and y relative axes
>(II) Logitech USB Optical Mouse: Configuring as mouse
>(**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
>(**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
>(**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
>(**) Logitech USB Optical Mouse: (accel) filter chain progression: 2.00
>(**) Logitech USB Optical Mouse: (accel) filter stage 0: 20.00 ms
>(**) Logitech USB Optical Mouse: (accel) set acceleration profile 0
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "DEL", prod id 41054
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
>(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
>(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
>(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
>(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
>(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
>(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
>(II) intel(0): EDID vendor "DEL", prod id 41054
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "DEL", prod id 41054
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
>(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
>(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
>(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
>(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
>(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
>(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
>(II) intel(0): EDID vendor "DEL", prod id 41054
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "DEL", prod id 41054
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
>(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
>(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
>(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
>(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
>(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
>(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
>(II) intel(0): EDID vendor "DEL", prod id 41054
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
>(II) intel(0): I2C bus "CRTDDC_A" removed.
>(II) intel(0): EDID vendor "DEL", prod id 41054
>(II) intel(0): Using hsync ranges from config file
>(II) intel(0): Using vrefresh ranges from config file
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
>(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
>(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
>(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
>(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
>(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
>(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
>(II) intel(0): EDID vendor "DEL", prod id 41054
>/*********************************************************************************************************************************8/
>and cat /etc/X11/vorg.conf
>/***********************************************************************************************************************************`/
># xorg.conf (X.Org X Window System server configuration file)
>#
># This file was generated by dexconf, the Debian X Configuration tool, using
># values from the debconf database.
>#
># Edit this file with caution, and see the xorg.conf manual page.
># (Type "man xorg.conf" at the shell prompt.)
>#
># This file is automatically updated on xserver-xorg package upgrades *only*
># if it has not been modified since the last upgrade of the xserver-xorg
># package.
>#
># Note that some configuration settings that could be done previously
># in this file, now are automatically configured by the server and settings
># here are ignored.
>#
># If you have edited this file but would like it to be automatically updated
># again, run the following command:
># sudo dpkg-reconfigure -phigh xserver-xorg
>
>Section "Device"
> Identifier "Intel Integrated Graphics Device"
> BusID "PCI:00:02:0"
> Driver "intel"
> VideoRam 1048560
> Option "Xvideo" "On"
> Option "DevicePresence" "On"
> OPtion "DRI" "TRUE"
> Option "AccelMethod" "UXA"
>EndSection
>
>Section "Monitor"
> Identifier "Configured Monitor"
>EndSection
>
>Section "Screen"
> Identifier "Default Screen"
> Monitor "Configured Monitor"
> Device "Configured Video Device"
>EndSection
>
>Section "Module"
> Load "dbe"
> Load "dri"
> Load "glx"
> Load "record"
> Load "synaptics"
>EndSection
>
>Section "DRI"
> Mode 0666
>EndSection
>/***********************************************************************************************************************************`/
>how can i fix the error and waring
>(EE) [drm] drmOpen failed.
>(EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
>
>(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
>(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
>(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000320 to 0x00000020
>(WW) intel(0): DRI2 requires UXA
>any ideas?
>
>
>
>
>
>
>
>
___________________________________________________________
SMS schreiben mit WEB.DE FreeMail - einfach, schnell und
kostenguenstig. Jetzt gleich testen! http://f.web.de/?mc=021192
More information about the xorg
mailing list