Anyone have XGI Z7/Z9 working well in server 1.15?

[Felix Miata]

If yes, is manual configuration normally required? Automagic does not work 
here in openSUSE Factory. Without declaring sis be used as driver via config 
file, FBDEV is used. When I set sis to be used, and do not set 'Option 
"NoAccel" "1", X segfaults:
http://fm.no-ip.com/Tmp/Linux/Xorg/xorg.0.log-g5eas-sis-segfault

Working OK but flickering 60Hz with NoAccel on:
http://fm.no-ip.com/Tmp/Linux/Xorg/xorg.0.log-g5eas-sis-1600X1200X120X16X60hz

I've found no similar open reports at bugzilla.novell.com. Possibly 
https://bugzilla.redhat.com/show_bug.cgi?id=947527 is the same.

# lspci | grep VGA
0a:03.0 VGA compatible controller: XGI Technology Inc. (eXtreme Graphics 
Innovation) Z7/Z9 (XG20 core)

Is sis even the right driver for this (cheap server board) chip?

hwinfo & lspci -v:
http://fm.no-ip.com/Tmp/Linux/Xorg/hwinfo-gfx-g5eas-xgi-z7z9.txt

monitor edid:
http://fm.no-ip.com/Tmp/Hardware/Display/edid-necFE2111SB-xgiZ7Z9.txt
-- 
"The wise are known for their understanding, and pleasant
words are persuasive." Proverbs 16:21 (New Living Translation)

   Team OS/2 ** Reg. Linux User #211409 ** a11y rocks!

Felix Miata  ***  http://fm.no-ip.com/
-- 
To unsubscribe, e-mail: opensuse-xorg+unsubscribe at opensuse.org
To contact the owner, e-mail: opensuse-xorg+owner at opensuse.org