Should touchsticks really be relative input devices?
peter.hutterer at who-t.net
Mon May 30 01:39:22 UTC 2016
On Sat, May 28, 2016 at 01:31:30PM +0200, Ben Gamari wrote:
> Hello input people,
> Recently I've been bringing up the touchstick hardware in the Dell
> Latitude E7470 and have noticed that the existing drivers for this sort
> of input device typically expose EV_REL events. Unfortunately,
> it seems that exposing the hardware in this way leads to some rather
> unfortunate hacks. Namely, you find things like this in the Alps driver,
> * The x and y values tend to be quite large, and when used
> * alone the trackstick is difficult to use. Scale them down
> * to compensate.
> x /= 8;
> y /= 8;
> input_report_rel(dev, REL_X, x);
> input_report_rel(dev, REL_Y, -y);
> Seeing this made me think back to experiences with touchsticks in
> previous Dell laptops, which require an annoyingly high force to begin
> movement. This is presumably due to the fact that the bottom few bits of
> resolution are being needlessly thrown away.
> Unfortunately, it doesn't seem that relative devices currently have much
> choice but to scale their input space; it seems there is no way for a
> device to expose its "range" to user mode (as you might do with
> input_set_abs_params in the case of an absolute device).
> Honestly, it's not even clear to me that touchstick devices should
> produce relative events. It seems like they are somewhere between a
> touchpad and mouse. Like a mouse, there is no absolute mapping between
> points in the input device space and the work space. However, like a
> touchpad the input space is bounded.
> Perhaps these devices should instead produce absolute events and be
> marked with INPUT_PROP_POINTING_STICK so that user land code can produce
> the expected relative behavior normalized to the range of the device.
> Has this been considered in the past?
not really. basically an interesting idea and you'd end up treating them
like joysticks. but the thing with tracksticks is that you get relative
events from the hardware and without heaps of hand-collected tables
you won't know the range the trackstick supports. so the abs idea just won't
We've been pushing properties into the udev hwdb to somewhat normalise the
motion and set the sensitivy so that the various sticks feel the same out of
the box. This is inherently problematic, without a standardised way to apply
force you can't be exact, even less so when you ask different users to pick
a sensitivity that provides "good movement at normal pressure"
good ideas to fix this are welcome, libinput's trackstick handling is one fo
the sore sports but short of the "expose everything as config knob" I
haven't seen good solutions yet. And that's an inherently bad solution, at
least for me as the maintainer :)
> Alternatively, perhaps relative devices ought to also be able to expose
> their range.
that would be interesting especially for the resolution parameter (min/max
doesn't make sense in relative devices). but you'll find that that value is
just not available for relativ devices. Very few mice for example will tell
you what their physical DPI is (and it's switchable in a lot of them anyway).
> Regardless of what happens, it would be great if some guidance for
> touchsticks could be added to the "Guidelines" section of the kernel's
More information about the xorg