xserver/hw/xorg/i2c Makefile.am, NONE, 1.1 xf86i2c.c, NONE,
1.1 xf86i2c.h, NONE, 1.1 xf86i2cmodule.c, NONE, 1.1
Daniel Stone
xserver-commit at pdx.freedesktop.org
Sun Apr 25 23:52:16 EST 2004
- Previous message: xserver/hw/xorg/fbdevhw Makefile.am, NONE, 1.1 fbdevhw.c, NONE,
1.1 fbdevhw.h, NONE, 1.1 fbdevhwstub.c, NONE, 1.1 fbpriv.h,
NONE, 1.1
- Next message: xserver/hw/xorg/include modularDefs.h, NONE, 1.1 xf86Date.h, NONE,
1.1 xf86Version.h, NONE, 1.1 xorgVersion.h, NONE, 1.1
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
Committed by: daniel
Update of /cvs/xserver/xserver/hw/xorg/i2c
In directory pdx:/tmp/cvs-serv17025/hw/xorg/i2c
Added Files:
Makefile.am xf86i2c.c xf86i2c.h xf86i2cmodule.c
Log Message:
Xizzle is dead, long live Xorg.
Re-import the DDX from X11R6.7, complete with automakey goodness, and do the
requisite configure.ac, et al, updates; also import the XKB extension from the
6.7 DIX.
Currently it'll link and then hang solid in RADEONInitAccel(), or the next
function if you enable NoAccel.
--- NEW FILE: Makefile.am ---
lib_LIBRARIES = libxorgi2c.a
libxorgi2c_a_SOURCES = xf86i2c.c xf86i2cmodule.c
INCLUDES = $(XORG_INCS)
AM_CFLAGS = $(XORG_CFLAGS)
sdk_INCLUDEDIR = $(includedir)/xorg
sdk_INCLUDES = xf86i2c.h
--- NEW FILE: xf86i2c.c ---
/*
* Copyright (C) 1998 Itai Nahshon, Michael Schimek
*
* The original code was derived from and inspired by
* the I2C driver from the Linux kernel.
* (c) 1998 Gerd Knorr <kraxel at cs.tu-berlin.de>
*/
/* $XFree86: xc/programs/Xserver/hw/xfree86/i2c/xf86i2c.c,v 1.14 2003/05/05 21:18:41 tsi Exp $ */
#if 1
#include "misc.h"
#include "xf86.h"
#include "xf86_ansic.h"
#include "xf86_OSproc.h"
#include <X11/X.h>
#include <X11/Xproto.h>
#include "scrnintstr.h"
#include "regionstr.h"
#include "windowstr.h"
#include "pixmapstr.h"
#include "validate.h"
#include "resource.h"
#include "gcstruct.h"
#include "dixstruct.h"
#else
typedef int Bool;
typedef void *Pointer;
#define NULL ((void *)0)
#define X_DEFAULT 0
#define TRUE 1
#define FALSE 0
#endif
#include "xf86i2c.h"
#define I2C_TIMEOUT(x) /*(x)*/ /* Report timeouts */
#define I2C_TRACE(x) /*(x)*/ /* Report progress */
/* Set which OSs have bad gettimeofday resolution. */
#if defined(SVR4) && !defined(sun)
#define BAD_GETTIMEOFDAY_RESOLUTION
#endif
/* This is the default I2CUDelay function if not supplied by the driver.
* High level I2C interfaces implementing the bus protocol in hardware
* should supply this function too.
*
* Delay execution at least usec microseconds.
* All values 0 to 1e6 inclusive must be expected.
*/
#ifdef BAD_GETTIMEOFDAY_RESOLUTION
/*
* This is temporary until a better, portable
* way is found. Adjust bogo_usec to match CPU speed.
*/
static int bogo_usec = 500;
static void
I2CUDelay(I2CBusPtr b, int usec)
{
volatile long i;
if (usec > 0)
for (i = usec * bogo_usec; i > 0; i--)
/* (perhaps hw delay action) */;
}
#else
static void
I2CUDelay(I2CBusPtr b, int usec)
{
long b_secs, b_usecs;
long a_secs, a_usecs;
long d_secs, d_usecs;
long diff;
if (usec > 0) {
xf86getsecs(&b_secs, &b_usecs);
do {
/* It would be nice to use {xf86}usleep,
* but usleep (1) takes >10000 usec !
*/
xf86getsecs(&a_secs, &a_usecs);
d_secs = (a_secs - b_secs);
d_usecs = (a_usecs - b_usecs);
diff = d_secs*1000000 + d_usecs;
} while (diff>0 && diff< (usec + 1));
}
}
#endif
/* Most drivers will register just with GetBits/PutBits functions.
* The following functions implement a software I2C protocol
* by using the promitive functions given by the driver.
* ================================================================
*
* It is assumed that there is just one master on the I2C bus, therefore
* there is no explicit test for conflits.
*/
#define RISEFALLTIME 2 /* usec, actually 300 to 1000 ns according to the i2c specs */
/* Some devices will hold SCL low to slow down the bus or until
* ready for transmission.
*
* This condition will be noticed when the master tries to raise
* the SCL line. You can set the timeout to zero if the slave device
* does not support this clock synchronization.
*/
static Bool
I2CRaiseSCL(I2CBusPtr b, int sda, int timeout)
{
int i, scl;
b->I2CPutBits(b, 1, sda);
b->I2CUDelay(b, b->RiseFallTime);
for (i = timeout; i > 0; i -= b->RiseFallTime) {
b->I2CGetBits(b, &scl, &sda);
if (scl) break;
b->I2CUDelay(b, b->RiseFallTime);
}
if (i <= 0) {
I2C_TIMEOUT(ErrorF("[I2CRaiseSCL(<%s>, %d, %d) timeout]", b->BusName, sda, timeout));
return FALSE;
}
return TRUE;
}
/* Send a start signal on the I2C bus. The start signal notifies
* devices that a new transaction is initiated by the bus master.
*
* The start signal is always followed by a slave address.
* Slave addresses are 8+ bits. The first 7 bits identify the
* device and the last bit signals if this is a read (1) or
* write (0) operation.
*
* There may be more than one start signal on one transaction.
* This happens for example on some devices that allow reading
* of registers. First send a start bit followed by the device
* address (with the last bit 0) and the register number. Then send
* a new start bit with the device address (with the last bit 1)
* and then read the value from the device.
*
* Note this is function does not implement a multiple master
* arbitration procedure.
*/
static Bool
I2CStart(I2CBusPtr b, int timeout)
{
if (!I2CRaiseSCL(b, 1, timeout))
return FALSE;
b->I2CPutBits(b, 1, 0);
b->I2CUDelay(b, b->HoldTime);
b->I2CPutBits(b, 0, 0);
b->I2CUDelay(b, b->HoldTime);
I2C_TRACE(ErrorF("\ni2c: <"));
return TRUE;
}
/* This is the default I2CStop function if not supplied by the driver.
*
* Signal devices on the I2C bus that a transaction on the
* bus has finished. There may be more than one start signal
* on a transaction but only one stop signal.
*/
static void
I2CStop(I2CDevPtr d)
{
I2CBusPtr b = d->pI2CBus;
b->I2CPutBits(b, 0, 0);
b->I2CUDelay(b, b->RiseFallTime);
b->I2CPutBits(b, 1, 0);
b->I2CUDelay(b, b->HoldTime);
b->I2CPutBits(b, 1, 1);
b->I2CUDelay(b, b->HoldTime);
I2C_TRACE(ErrorF(">\n"));
}
/* Write/Read a single bit to/from a device.
* Return FALSE if a timeout occurs.
*/
static Bool
I2CWriteBit(I2CBusPtr b, int sda, int timeout)
{
Bool r;
b->I2CPutBits(b, 0, sda);
b->I2CUDelay(b, b->RiseFallTime);
r = I2CRaiseSCL(b, sda, timeout);
b->I2CUDelay(b, b->HoldTime);
b->I2CPutBits(b, 0, sda);
b->I2CUDelay(b, b->HoldTime);
return r;
}
static Bool
I2CReadBit(I2CBusPtr b, int *psda, int timeout)
{
Bool r;
int scl;
r = I2CRaiseSCL(b, 1, timeout);
b->I2CUDelay(b, b->HoldTime);
b->I2CGetBits(b, &scl, psda);
b->I2CPutBits(b, 0, 1);
b->I2CUDelay(b, b->HoldTime);
return r;
}
/* This is the default I2CPutByte function if not supplied by the driver.
*
* A single byte is sent to the device.
* The function returns FALSE if a timeout occurs, you should send
* a stop condition afterwards to reset the bus.
*
* A timeout occurs,
* if the slave pulls SCL to slow down the bus more than ByteTimeout usecs,
* or slows down the bus for more than BitTimeout usecs for each bit,
* or does not send an ACK bit (0) to acknowledge the transmission within
* AcknTimeout usecs, but a NACK (1) bit.
*
* AcknTimeout must be at least b->HoldTime, the other timeouts can be
* zero according to the comment on I2CRaiseSCL.
*/
static Bool
I2CPutByte(I2CDevPtr d, I2CByte data)
{
Bool r;
int i, scl, sda;
I2CBusPtr b = d->pI2CBus;
if (!I2CWriteBit(b, (data >> 7) & 1, d->ByteTimeout))
return FALSE;
for (i = 6; i >= 0; i--)
if (!I2CWriteBit(b, (data >> i) & 1, d->BitTimeout))
return FALSE;
b->I2CPutBits(b, 0, 1);
b->I2CUDelay(b, b->RiseFallTime);
r = I2CRaiseSCL(b, 1, b->HoldTime);
if (r) {
for (i = d->AcknTimeout; i > 0; i -= b->HoldTime) {
b->I2CUDelay(b, b->HoldTime);
b->I2CGetBits(b, &scl, &sda);
if (sda == 0) break;
}
if (i <= 0) {
I2C_TIMEOUT(ErrorF("[I2CPutByte(<%s>, 0x%02x, %d, %d, %d) timeout]",
b->BusName, data, d->BitTimeout,
d->ByteTimeout, d->AcknTimeout));
r = FALSE;
}
I2C_TRACE(ErrorF("W%02x%c ", (int) data, sda ? '-' : '+'));
}
b->I2CPutBits(b, 0, 1);
b->I2CUDelay(b, b->HoldTime);
return r;
}
/* This is the default I2CGetByte function if not supplied by the driver.
*
* A single byte is read from the device.
* The function returns FALSE if a timeout occurs, you should send
* a stop condition afterwards to reset the bus.
*
* A timeout occurs,
* if the slave pulls SCL to slow down the bus more than ByteTimeout usecs,
* or slows down the bus for more than b->BitTimeout usecs for each bit.
*
* ByteTimeout must be at least b->HoldTime, the other timeouts can be
* zero according to the comment on I2CRaiseSCL.
*
* For the <last> byte in a sequence the acknowledge bit NACK (1),
* otherwise ACK (0) will be sent.
*/
static Bool
I2CGetByte(I2CDevPtr d, I2CByte *data, Bool last)
{
int i, sda;
I2CBusPtr b = d->pI2CBus;
b->I2CPutBits(b, 0, 1);
b->I2CUDelay(b, b->RiseFallTime);
if (!I2CReadBit(b, &sda, d->ByteTimeout))
return FALSE;
*data = (sda > 0) << 7;
for (i = 6; i >= 0; i--)
if (!I2CReadBit(b, &sda, d->BitTimeout))
return FALSE;
else
*data |= (sda > 0) << i;
if (!I2CWriteBit(b, last ? 1 : 0, d->BitTimeout))
return FALSE;
I2C_TRACE(ErrorF("R%02x%c ", (int) *data, last ? '+' : '-'));
return TRUE;
}
/* This is the default I2CAddress function if not supplied by the driver.
*
* It creates the start condition, followed by the d->SlaveAddr.
* Higher level functions must call this routine rather than
* I2CStart/PutByte because a hardware I2C master may not be able
* to send a slave address without a start condition.
*
* The same timeouts apply as with I2CPutByte and additional a
* StartTimeout, similar to the ByteTimeout but for the start
* condition.
*
* In case of a timeout, the bus is left in a clean idle condition.
* I. e. you *must not* send a Stop. If this function succeeds, you *must*.
*
* The slave address format is 16 bit, with the legacy _8_bit_ slave address
* in the least significant byte. This is, the slave address must include the
* R/_W flag as least significant bit.
*
* The most significant byte of the address will be sent _after_ the LSB,
* but only if the LSB indicates:
* a) an 11 bit address, this is LSB = 1111 0xxx.
* b) a 'general call address', this is LSB = 0000 000x - see the I2C specs
* for more.
*/
static Bool
I2CAddress(I2CDevPtr d, I2CSlaveAddr addr)
{
if (I2CStart(d->pI2CBus, d->StartTimeout)) {
if (I2CPutByte(d, addr & 0xFF)) {
if ((addr & 0xF8) != 0xF0 &&
(addr & 0xFE) != 0x00)
return TRUE;
if (I2CPutByte(d, (addr >> 8) & 0xFF))
return TRUE;
}
I2CStop(d);
}
return FALSE;
}
/* These are the hardware independent I2C helper functions.
* ========================================================
*/
/* Function for probing. Just send the slave address
* and return true if the device responds. The slave address
* must have the lsb set to reflect a read (1) or write (0) access.
* Don't expect a read- or write-only device will respond otherwise.
*/
Bool
xf86I2CProbeAddress(I2CBusPtr b, I2CSlaveAddr addr)
{
int r;
I2CDevRec d;
d.DevName = "Probing";
d.BitTimeout = b->BitTimeout;
d.ByteTimeout = b->ByteTimeout;
d.AcknTimeout = b->AcknTimeout;
d.StartTimeout = b->StartTimeout;
d.SlaveAddr = addr;
d.pI2CBus = b;
d.NextDev = NULL;
r = b->I2CAddress(&d, addr);
if (r) b->I2CStop(&d);
return r;
}
/* All functions below are related to devices and take the
* slave address and timeout values from an I2CDevRec. They
* return FALSE in case of an error (presumably a timeout).
*/
/* General purpose read and write function.
*
* 1st, if nWrite > 0
* Send a start condition
* Send the slave address (1 or 2 bytes) with write flag
* Write n bytes from WriteBuffer
* 2nd, if nRead > 0
* Send a start condition [again]
* Send the slave address (1 or 2 bytes) with read flag
* Read n bytes to ReadBuffer
* 3rd, if a Start condition has been successfully sent,
* Send a Stop condition.
*
* The functions exits immediately when an error occures,
* not proceeding any data left. However, step 3 will
* be executed anyway to leave the bus in clean idle state.
*/
static Bool
I2CWriteRead(I2CDevPtr d,
I2CByte *WriteBuffer, int nWrite,
I2CByte *ReadBuffer, int nRead)
{
Bool r = TRUE;
I2CBusPtr b = d->pI2CBus;
int s = 0;
if (r && nWrite > 0) {
r = b->I2CAddress(d, d->SlaveAddr & ~1);
if (r) {
for (; nWrite > 0; WriteBuffer++, nWrite--)
if (!(r = b->I2CPutByte(d, *WriteBuffer)))
break;
s++;
}
}
if (r && nRead > 0) {
r = b->I2CAddress(d, d->SlaveAddr | 1);
if (r) {
for (; nRead > 0; ReadBuffer++, nRead--)
if (!(r = b->I2CGetByte(d, ReadBuffer, nRead == 1)))
break;
s++;
}
}
if (s) b->I2CStop(d);
return r;
}
/* wrapper - for compatibility and convinience */
Bool
xf86I2CWriteRead(I2CDevPtr d,
I2CByte *WriteBuffer, int nWrite,
I2CByte *ReadBuffer, int nRead)
{
I2CBusPtr b = d->pI2CBus;
return b->I2CWriteRead(d,WriteBuffer,nWrite,ReadBuffer,nRead);
}
/* Read a byte, the only readable register of a device.
*/
Bool
xf86I2CReadStatus(I2CDevPtr d, I2CByte *pbyte)
{
return xf86I2CWriteRead(d, NULL, 0, pbyte, 1);
}
/* Read a byte from one of the registers determined by its sub-address.
*/
Bool
xf86I2CReadByte(I2CDevPtr d, I2CByte subaddr, I2CByte *pbyte)
{
return xf86I2CWriteRead(d, &subaddr, 1, pbyte, 1);
}
/* Read bytes from subsequent registers determined by the
* sub-address of the first register.
*/
Bool
xf86I2CReadBytes(I2CDevPtr d, I2CByte subaddr, I2CByte *pbyte, int n)
{
return xf86I2CWriteRead(d, &subaddr, 1, pbyte, n);
}
/* Read a word (high byte, then low byte) from one of the registers
* determined by its sub-address.
*/
Bool
xf86I2CReadWord(I2CDevPtr d, I2CByte subaddr, unsigned short *pword)
{
I2CByte rb[2];
if (!xf86I2CWriteRead(d, &subaddr, 1, rb, 2)) return FALSE;
*pword = (rb[0] << 8) | rb[1];
return TRUE;
}
/* Write a byte to one of the registers determined by its sub-address.
*/
Bool
xf86I2CWriteByte(I2CDevPtr d, I2CByte subaddr, I2CByte byte)
{
I2CByte wb[2];
wb[0] = subaddr;
wb[1] = byte;
return xf86I2CWriteRead(d, wb, 2, NULL, 0);
}
/* Write bytes to subsequent registers determined by the
* sub-address of the first register.
*/
Bool
xf86I2CWriteBytes(I2CDevPtr d, I2CByte subaddr,
I2CByte *WriteBuffer, int nWrite)
{
I2CBusPtr b = d->pI2CBus;
Bool r = TRUE;
if (nWrite > 0) {
r = b->I2CAddress(d, d->SlaveAddr & ~1);
if (r){
if ((r = b->I2CPutByte(d, subaddr)))
for (; nWrite > 0; WriteBuffer++, nWrite--)
if (!(r = b->I2CPutByte(d, *WriteBuffer)))
break;
b->I2CStop(d);
}
}
return r;
}
/* Write a word (high byte, then low byte) to one of the registers
* determined by its sub-address.
*/
Bool
xf86I2CWriteWord(I2CDevPtr d, I2CByte subaddr, unsigned short word)
{
I2CByte wb[3];
wb[0] = subaddr;
wb[1] = word >> 8;
wb[2] = word & 0xFF;
return xf86I2CWriteRead(d, wb, 3, NULL, 0);
}
/* Write a vector of bytes to not adjacent registers. This vector is,
* 1st byte sub-address, 2nd byte value, 3rd byte sub-address asf.
* This function is intended to initialize devices. Note this function
* exits immediately when an error occurs, some registers may
* remain uninitialized.
*/
Bool
xf86I2CWriteVec(I2CDevPtr d, I2CByte *vec, int nValues)
{
I2CBusPtr b = d->pI2CBus;
Bool r = TRUE;
int s = 0;
if (nValues > 0) {
for (; nValues > 0; nValues--, vec += 2) {
if (!(r = b->I2CAddress(d, d->SlaveAddr & ~1)))
break;
s++;
if (!(r = b->I2CPutByte(d, vec[0])))
break;
if (!(r = b->I2CPutByte(d, vec[1])))
break;
}
if (s > 0) b->I2CStop(d);
}
return r;
}
/* Administrative functions.
* =========================
*/
/* Allocates an I2CDevRec for you and initializes with propper defaults
* you may modify before calling xf86I2CDevInit. Your I2CDevRec must
* contain at least a SlaveAddr, and a pI2CBus pointer to the bus this
* device shall be linked to.
*
* See function I2CAddress for the slave address format. Always set
* the least significant bit, indicating a read or write access, to zero.
*/
I2CDevPtr
xf86CreateI2CDevRec(void)
{
return xcalloc(1, sizeof(I2CDevRec));
}
/* Unlink an I2C device. If you got the I2CDevRec from xf86CreateI2CDevRec
* you should set <unalloc> to free it.
*/
void
xf86DestroyI2CDevRec(I2CDevPtr d, Bool unalloc)
{
if (d) {
I2CDevPtr *p;
/* Remove this from the list of active I2C devices. */
for (p = &d->pI2CBus->FirstDev; *p != NULL; p = &(*p)->NextDev)
if (*p == d) {
*p = (*p)->NextDev;
break;
}
xf86DrvMsg(d->pI2CBus->scrnIndex, X_INFO,
"I2C device \"%s:%s\" removed.\n",
d->pI2CBus->BusName, d->DevName);
if (unalloc) xfree(d);
}
}
/* I2C transmissions are related to an I2CDevRec you must link to a
* previously registered bus (see xf86I2CBusInit) before attempting
* to read and write data. You may call xf86I2CProbeAddress first to
* see if the device in question is present on this bus.
*
* xf86I2CDevInit will not allocate an I2CBusRec for you, instead you
* may enter a pointer to a statically allocated I2CDevRec or the (modified)
* result of xf86CreateI2CDevRec.
*
* If you don't specify timeouts for the device (n <= 0), it will inherit
* the bus-wide defaults. The function returns TRUE on success.
*/
Bool
xf86I2CDevInit(I2CDevPtr d)
{
I2CBusPtr b;
if (d == NULL ||
(b = d->pI2CBus) == NULL ||
(d->SlaveAddr & 1) ||
xf86I2CFindDev(b, d->SlaveAddr) != NULL)
return FALSE;
if (d->BitTimeout <= 0) d->BitTimeout = b->BitTimeout;
if (d->ByteTimeout <= 0) d->ByteTimeout = b->ByteTimeout;
if (d->AcknTimeout <= 0) d->AcknTimeout = b->AcknTimeout;
if (d->StartTimeout <= 0) d->StartTimeout = b->StartTimeout;
d->NextDev = b->FirstDev;
b->FirstDev = d;
xf86DrvMsg(b->scrnIndex, X_INFO,
"I2C device \"%s:%s\" registered at address 0x%02X.\n",
b->BusName, d->DevName, d->SlaveAddr);
return TRUE;
}
I2CDevPtr
xf86I2CFindDev(I2CBusPtr b, I2CSlaveAddr addr)
{
I2CDevPtr d;
if (b) {
for (d = b->FirstDev; d != NULL; d = d->NextDev)
if (d->SlaveAddr == addr)
return d;
}
return NULL;
}
static I2CBusPtr I2CBusList;
/* Allocates an I2CBusRec for you and initializes with propper defaults
* you may modify before calling xf86I2CBusInit. Your I2CBusRec must
* contain at least a BusName, a scrnIndex (or -1), and a complete set
* of either high or low level I2C function pointers. You may pass
* bus-wide timeouts, otherwise inplausible values will be replaced
* with safe defaults.
*/
I2CBusPtr
xf86CreateI2CBusRec(void)
{
I2CBusPtr b;
b = (I2CBusPtr) xcalloc(1, sizeof(I2CBusRec));
if (b != NULL) {
b->scrnIndex = -1;
b->HoldTime = 5; /* 100 kHz bus */
b->BitTimeout = 5;
b->ByteTimeout = 5;
b->AcknTimeout = 5;
b->StartTimeout = 5;
b->RiseFallTime = RISEFALLTIME;
}
return b;
}
/* Unregister an I2C bus. If you got the I2CBusRec from xf86CreateI2CBusRec
* you should set <unalloc> to free it. If you set <devs_too>, the function
* xf86DestroyI2CDevRec will be called for all devices linked to the bus
* first, passing down the <unalloc> option.
*/
void
xf86DestroyI2CBusRec(I2CBusPtr b, Bool unalloc, Bool devs_too)
{
if (b) {
I2CBusPtr *p;
/* Remove this from the list of active I2C buses */
for (p = &I2CBusList; *p != NULL; p = &(*p)->NextBus)
if (*p == b) {
*p = (*p)->NextBus;
break;
}
if (b->FirstDev != NULL) {
if (devs_too) {
I2CDevPtr d;
while ((d = b->FirstDev) != NULL) {
b->FirstDev = d->NextDev;
xf86DestroyI2CDevRec(d, unalloc);
}
} else {
if (unalloc) {
xf86Msg(X_ERROR, "i2c bug: Attempt to remove I2C bus \"%s\", "
"but device list is not empty.\n",
b->BusName);
return;
}
}
}
xf86DrvMsg(b->scrnIndex, X_INFO, "I2C bus \"%s\" removed.\n",
b->BusName);
if (unalloc) xfree(b);
}
}
/* I2C masters have to register themselves using this function.
* It will not allocate an I2CBusRec for you, instead you may enter
* a pointer to a statically allocated I2CBusRec or the (modified)
* result of xf86CreateI2CBusRec. Returns TRUE on success.
*
* At this point there won't be any traffic on the I2C bus.
*/
Bool
xf86I2CBusInit(I2CBusPtr b)
{
/* I2C buses must be identified by a unique scrnIndex
* and name. If scrnIndex is unspecified (a negative value),
* then the name must be unique throughout the server.
*/
if (b->BusName == NULL ||
xf86I2CFindBus(b->scrnIndex, b->BusName) != NULL)
return FALSE;
/* If the high level functions are not
* supplied, use the generic functions.
* In this case we need the low-level
* function.
*/
if (b->I2CWriteRead == NULL)
{
b->I2CWriteRead=I2CWriteRead;
if (b->I2CPutBits == NULL ||
b->I2CGetBits == NULL)
{
if (b->I2CPutByte == NULL ||
b->I2CGetByte == NULL ||
b->I2CAddress == NULL ||
b->I2CStop == NULL)
return FALSE;
} else {
b->I2CPutByte = I2CPutByte;
b->I2CGetByte = I2CGetByte;
b->I2CAddress = I2CAddress;
b->I2CStop = I2CStop;
}
}
if (b->I2CUDelay == NULL)
b->I2CUDelay = I2CUDelay;
if (b->HoldTime < 2) b->HoldTime = 5;
if (b->BitTimeout <= 0) b->BitTimeout = b->HoldTime;
if (b->ByteTimeout <= 0) b->ByteTimeout = b->HoldTime;
if (b->AcknTimeout <= 0) b->AcknTimeout = b->HoldTime;
if (b->StartTimeout <= 0) b->StartTimeout = b->HoldTime;
/* Put new bus on list. */
b->NextBus = I2CBusList;
I2CBusList = b;
xf86DrvMsg(b->scrnIndex, X_INFO, "I2C bus \"%s\" initialized.\n",
b->BusName);
return TRUE;
}
I2CBusPtr
xf86I2CFindBus(int scrnIndex, char *name)
{
I2CBusPtr p;
if (name != NULL)
for (p = I2CBusList; p != NULL; p = p->NextBus)
if (scrnIndex < 0 || p->scrnIndex == scrnIndex)
if (!strcmp(p->BusName, name))
return p;
return NULL;
}
/*
* Return an array of I2CBusPtr's related to a screen. The caller is
* responsible for freeing the array.
*/
int
xf86I2CGetScreenBuses(int scrnIndex, I2CBusPtr **pppI2CBus)
{
I2CBusPtr pI2CBus;
int n = 0;
if (pppI2CBus)
*pppI2CBus = NULL;
for (pI2CBus = I2CBusList; pI2CBus; pI2CBus = pI2CBus->NextBus) {
if ((pI2CBus->scrnIndex >= 0) && (pI2CBus->scrnIndex != scrnIndex))
continue;
n++;
if (!pppI2CBus)
continue;
*pppI2CBus = xnfrealloc(*pppI2CBus, n * sizeof(I2CBusPtr));
*pppI2CBus[n - 1] = pI2CBus;
}
return n;
}
--- NEW FILE: xf86i2c.h ---
/*
* Copyright (C) 1998 Itai Nahshon, Michael Schimek
*/
/* $XFree86: xc/programs/Xserver/hw/xfree86/i2c/xf86i2c.h,v 1.10 2003/07/16 01:38:47 dawes Exp $ */
#ifndef _XF86I2C_H
#define _XF86I2C_H
#include "regionstr.h"
typedef unsigned char I2CByte;
typedef unsigned short I2CSlaveAddr;
typedef struct _I2CBusRec *I2CBusPtr;
typedef struct _I2CDevRec *I2CDevPtr;
/* I2C masters have to register themselves */
typedef struct _I2CBusRec {
char * BusName;
int scrnIndex;
void (*I2CUDelay) (I2CBusPtr b, int usec);
void (*I2CPutBits)(I2CBusPtr b, int scl, int sda);
void (*I2CGetBits)(I2CBusPtr b, int *scl, int *sda);
/* Look at the generic routines to see how these functions should behave. */
Bool (*I2CAddress)(I2CDevPtr d, I2CSlaveAddr);
void (*I2CStop) (I2CDevPtr d);
Bool (*I2CPutByte)(I2CDevPtr d, I2CByte data);
Bool (*I2CGetByte)(I2CDevPtr d, I2CByte *data, Bool);
DevUnion DriverPrivate;
int HoldTime; /* 1 / bus clock frequency, 5 or 2 usec */
int BitTimeout; /* usec */
int ByteTimeout; /* usec */
int AcknTimeout; /* usec */
int StartTimeout; /* usec */
int RiseFallTime; /* usec */
I2CDevPtr FirstDev;
I2CBusPtr NextBus;
Bool (*I2CWriteRead)(I2CDevPtr d, I2CByte *WriteBuffer, int nWrite,
I2CByte *ReadBuffer, int nRead);
} I2CBusRec;
I2CBusPtr xf86CreateI2CBusRec(void);
void xf86DestroyI2CBusRec(I2CBusPtr pI2CBus, Bool unalloc, Bool devs_too);
Bool xf86I2CBusInit(I2CBusPtr pI2CBus);
I2CBusPtr xf86I2CFindBus(int scrnIndex, char *name);
int xf86I2CGetScreenBuses(int scrnIndex, I2CBusPtr **pppI2CBus);
/* I2C slave devices */
typedef struct _I2CDevRec {
char * DevName;
int BitTimeout; /* usec */
int ByteTimeout; /* usec */
int AcknTimeout; /* usec */
int StartTimeout; /* usec */
I2CSlaveAddr SlaveAddr;
I2CBusPtr pI2CBus;
I2CDevPtr NextDev;
DevUnion DriverPrivate;
} I2CDevRec;
I2CDevPtr xf86CreateI2CDevRec(void);
void xf86DestroyI2CDevRec(I2CDevPtr pI2CDev, Bool unalloc);
Bool xf86I2CDevInit(I2CDevPtr pI2CDev);
I2CDevPtr xf86I2CFindDev(I2CBusPtr, I2CSlaveAddr);
/* See descriptions of these functions in xf86i2c.c */
Bool xf86I2CProbeAddress(I2CBusPtr pI2CBus, I2CSlaveAddr);
Bool xf86I2CWriteRead(I2CDevPtr d, I2CByte *WriteBuffer, int nWrite,
I2CByte *ReadBuffer, int nRead);
#define xf86I2CRead(d, rb, nr) xf86I2CWriteRead(d, NULL, 0, rb, nr)
Bool xf86I2CReadStatus(I2CDevPtr d, I2CByte *pbyte);
Bool xf86I2CReadByte(I2CDevPtr d, I2CByte subaddr, I2CByte *pbyte);
Bool xf86I2CReadBytes(I2CDevPtr d, I2CByte subaddr, I2CByte *pbyte, int n);
Bool xf86I2CReadWord(I2CDevPtr d, I2CByte subaddr, unsigned short *pword);
#define xf86I2CWrite(d, wb, nw) xf86I2CWriteRead(d, wb, nw, NULL, 0)
Bool xf86I2CWriteByte(I2CDevPtr d, I2CByte subaddr, I2CByte byte);
Bool xf86I2CWriteBytes(I2CDevPtr d, I2CByte subaddr, I2CByte *WriteBuffer, int nWrite);
Bool xf86I2CWriteWord(I2CDevPtr d, I2CByte subaddr, unsigned short word);
Bool xf86I2CWriteVec(I2CDevPtr d, I2CByte *vec, int nValues);
#endif /*_XF86I2C_H */
--- NEW FILE: xf86i2cmodule.c ---
/* (c) Itai Nahshon
*
* This code is derived from and inspired by the I2C driver
* from the Linux kernel.
* (c) 1998 Gerd Knorr <kraxel at cs.tu-berlin.de>
*/
/* $XFree86: xc/programs/Xserver/hw/xfree86/i2c/xf86i2cmodule.c,v 1.6 1999/01/26 05:54:10 dawes Exp $ */
#include "xf86Module.h"
static MODULESETUPPROTO(i2cSetup);
static XF86ModuleVersionInfo i2cVersRec =
{
"i2c",
MODULEVENDORSTRING,
MODINFOSTRING1,
MODINFOSTRING2,
XORG_VERSION_CURRENT,
1, 2, 0,
ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */
ABI_VIDEODRV_VERSION,
MOD_CLASS_NONE,
{0,0,0,0}
};
XF86ModuleData i2cModuleData = { &i2cVersRec, i2cSetup, NULL };
static pointer
i2cSetup(pointer module, pointer opts, int *errmaj, int *errmin) {
/* ErrorF("i2cSetup\n"); */
return (pointer)1;
}
- Previous message: xserver/hw/xorg/fbdevhw Makefile.am, NONE, 1.1 fbdevhw.c, NONE,
1.1 fbdevhw.h, NONE, 1.1 fbdevhwstub.c, NONE, 1.1 fbpriv.h,
NONE, 1.1
- Next message: xserver/hw/xorg/include modularDefs.h, NONE, 1.1 xf86Date.h, NONE,
1.1 xf86Version.h, NONE, 1.1 xorgVersion.h, NONE, 1.1
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
More information about the xserver-commit
mailing list