Convert the Rockchip HDMI TX text binding to YAML.
Signed-off-by: Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com --- Changes since v1:
- Drop pinctrl-0 and pinctrl-1 - Use unevaluatedProperties instead of additionalProperties - Drop reg and interrupts as they're checked in the base schema - Rebase on top of OF graph schema, dropped redundant properties - Fix identation for enum entries - Tidy up clock names --- .../display/rockchip/dw_hdmi-rockchip.txt | 74 -------- .../display/rockchip/rockchip,dw-hdmi.yaml | 158 ++++++++++++++++++ 2 files changed, 158 insertions(+), 74 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt deleted file mode 100644 index 3d32ce137e7f..000000000000 --- a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt +++ /dev/null @@ -1,74 +0,0 @@ -Rockchip DWC HDMI TX Encoder -============================ - -The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP -with a companion PHY IP. - -These DT bindings follow the Synopsys DWC HDMI TX bindings defined in -Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the -following device-specific properties. - - -Required properties: - -- compatible: should be one of the following: - "rockchip,rk3228-dw-hdmi" - "rockchip,rk3288-dw-hdmi" - "rockchip,rk3328-dw-hdmi" - "rockchip,rk3399-dw-hdmi" -- reg: See dw_hdmi.txt. -- reg-io-width: See dw_hdmi.txt. Shall be 4. -- interrupts: HDMI interrupt number -- clocks: See dw_hdmi.txt. -- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt. -- ports: See dw_hdmi.txt. The DWC HDMI shall have a single port numbered 0 - corresponding to the video input of the controller. The port shall have two - endpoints, numbered 0 and 1, connected respectively to the vopb and vopl. -- rockchip,grf: Shall reference the GRF to mux vopl/vopb. - -Optional properties - -- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master - or the functionally-reduced I2C master contained in the DWC HDMI. When - connected to a system I2C master this property contains a phandle to that - I2C master controller. -- clock-names: See dw_hdmi.txt. The "cec" clock is optional. -- clock-names: May contain "cec" as defined in dw_hdmi.txt. -- clock-names: May contain "grf", power for grf io. -- clock-names: May contain "vpll", external clock for some hdmi phy. -- phys: from general PHY binding: the phandle for the PHY device. -- phy-names: Should be "hdmi" if phys references an external phy. - -Optional pinctrl entry: -- If you have both a "unwedge" and "default" pinctrl entry, dw_hdmi - will switch to the unwedge pinctrl state for 10ms if it ever gets an - i2c timeout. It's intended that this unwedge pinctrl entry will - cause the SDA line to be driven low to work around a hardware - errata. - -Example: - -hdmi: hdmi@ff980000 { - compatible = "rockchip,rk3288-dw-hdmi"; - reg = <0xff980000 0x20000>; - reg-io-width = <4>; - ddc-i2c-bus = <&i2c5>; - rockchip,grf = <&grf>; - interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; - clock-names = "iahb", "isfr"; - ports { - hdmi_in: port { - #address-cells = <1>; - #size-cells = <0>; - hdmi_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_hdmi>; - }; - hdmi_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_hdmi>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml new file mode 100644 index 000000000000..4ef1e115a2ae --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip DWC HDMI TX Encoder + +maintainers: + - Mark Yao mark.yao@rock-chips.com + +description: | + The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP + with a companion PHY IP. + +allOf: + - $ref: ../bridge/synopsys,dw-hdmi.yaml# + +properties: + compatible: + enum: + - rockchip,rk3228-dw-hdmi + - rockchip,rk3288-dw-hdmi + - rockchip,rk3328-dw-hdmi + - rockchip,rk3399-dw-hdmi + + reg-io-width: + const: 4 + + clocks: + minItems: 2 + maxItems: 5 + items: + - {} + - {} + # The next three clocks are all optional, but shall be specified in this + # order when present. + - description: The HDMI CEC controller main clock + - description: Power for GRF IO + - description: External clock for some HDMI PHY + + clock-names: + minItems: 2 + maxItems: 5 + items: + - {} + - {} + - enum: + - cec + - grf + - vpll + - enum: + - grf + - vpll + - const: vpll + + ddc-i2c-bus: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The HDMI DDC bus can be connected to either a system I2C master or the + functionally-reduced I2C master contained in the DWC HDMI. When connected + to a system I2C master this property contains a phandle to that I2C + master controller. + + phys: + maxItems: 1 + description: The HDMI PHY + + phy-names: + const: hdmi + + pinctrl-names: + description: + The unwedge pinctrl entry shall drive the DDC SDA line low. This is + intended to work around a hardware errata that can cause the DDC I2C + bus to be wedged. + items: + - const: default + - const: unwedge + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Input of the DWC HDMI TX + + properties: + endpoint@0: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + description: Connection to the VOPB + + endpoint@1: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + description: Connection to the VOPL + + required: + - endpoint@0 + - endpoint@1 + + required: + - port + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the GRF to mux vopl/vopb. + +required: + - compatible + - reg + - reg-io-width + - clocks + - clock-names + - interrupts + - ports + - rockchip,grf + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3288-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + hdmi: hdmi@ff980000 { + compatible = "rockchip,rk3288-dw-hdmi"; + reg = <0xff980000 0x20000>; + reg-io-width = <4>; + ddc-i2c-bus = <&i2c5>; + rockchip,grf = <&grf>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; + clock-names = "iahb", "isfr"; + + ports { + port { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_hdmi>; + }; + hdmi_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_hdmi>; + }; + }; + }; + }; + +...