This patch add regulator_set_load() before enable regulator at DP phy driver.
Signed-off-by: Kuogee Hsieh quic_khsieh@quicinc.com Reviewed-by: Stephen Boyd swboyd@chromium.org Reviewed-by: Douglas Anderson dianders@chromium.org --- drivers/phy/qualcomm/phy-qcom-qmp.c | 40 ++++++++++++++++++++++++++++--------- 1 file changed, 31 insertions(+), 9 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index c7309e981..e5836ea 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -3119,6 +3119,17 @@ static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_misc_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_PRE_GAIN, 0x2e), };
+/* list of regulators */ +struct qmp_regulator_data { + const char *name; + unsigned int enable_load; +}; + +struct qmp_regulator_data qmp_phy_vreg_l[] = { + { .name = "vdda-phy", .enable_load = 21800 }, + { .name = "vdda-pll", .enable_load = 36000 }, +}; + struct qmp_phy;
/* struct qmp_phy_cfg - per-PHY initialization config */ @@ -3173,7 +3184,7 @@ struct qmp_phy_cfg { const char * const *reset_list; int num_resets; /* regulators to be requested */ - const char * const *vreg_list; + const struct qmp_regulator_data *vreg_list; int num_vregs;
/* array of registers with different offsets */ @@ -3385,11 +3396,6 @@ static const char * const sdm845_pciephy_reset_l[] = { "phy", };
-/* list of regulators */ -static const char * const qmp_phy_vreg_l[] = { - "vdda-phy", "vdda-pll", -}; - static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = { .type = PHY_TYPE_USB3, .nlanes = 1, @@ -5561,16 +5567,32 @@ static int qcom_qmp_phy_vreg_init(struct device *dev, const struct qmp_phy_cfg * { struct qcom_qmp *qmp = dev_get_drvdata(dev); int num = cfg->num_vregs; - int i; + int ret, i;
qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL); if (!qmp->vregs) return -ENOMEM;
for (i = 0; i < num; i++) - qmp->vregs[i].supply = cfg->vreg_list[i]; + qmp->vregs[i].supply = cfg->vreg_list[i].name;
- return devm_regulator_bulk_get(dev, num, qmp->vregs); + ret = devm_regulator_bulk_get(dev, num, qmp->vregs); + if (ret) { + dev_err(dev, "failed at devm_regulator_bulk_get\n"); + return ret; + } + + for (i = 0; i < num; i++) { + ret = regulator_set_load(qmp->vregs[i].consumer, + cfg->vreg_list[i].enable_load); + if (ret) { + dev_err(dev, "failed to set load at %s\n", + qmp->vregs[i].supply); + return ret; + } + } + + return 0; }
static int qcom_qmp_phy_reset_init(struct device *dev, const struct qmp_phy_cfg *cfg)