Re: [PATCH] drm/ast: Disable fast reset after DRAM initial

Hi

Am 11.01.21 um 07:43 schrieb KuoHsiang Chou:

[Bug][AST2500] When AST2500 acts as stand-alone VGA so that DRAM and DVO initialization have to be achieved by VGA driver with P2A (PCI to AHB) enabling. However, HW suggests disable Fast reset mode after DRAM initializaton, because fast reset mode is mainly designed for ARM ICE debugger. Once Fast reset is checked as enabling, WDT (Watch Dog Timer) should be first enabled to avoid system deadlock before disable fast reset mode.

Signed-off-by: KuoHsiang Chou kuohsiang_chou@aspeedtech.com

drivers/gpu/drm/ast/ast_drv.h | 1 + drivers/gpu/drm/ast/ast_main.c | 4 ++ drivers/gpu/drm/ast/ast_post.c | 72 ++++++++++++++++++++++------------ 3 files changed, 51 insertions(+), 26 deletions(-)

diff --git a/drivers/gpu/drm/ast/ast_drv.h b/drivers/gpu/drm/ast/ast_drv.h index da6dfb677540..8bdd1482370d 100644 --- a/drivers/gpu/drm/ast/ast_drv.h +++ b/drivers/gpu/drm/ast/ast_drv.h @@ -320,6 +320,7 @@ bool ast_is_vga_enabled(struct drm_device *dev); void ast_post_gpu(struct drm_device *dev); u32 ast_mindwm(struct ast_private *ast, u32 r); void ast_moutdwm(struct ast_private *ast, u32 r, u32 v); +void patch_ahb_ast2500(struct ast_private *ast);

The function name should be named ast_patch_ahb_2500() because it's not static.

/* ast dp501 */ void ast_set_dp501_video_output(struct drm_device *dev, u8 mode); bool ast_backup_fw(struct drm_device *dev, u8 *addr, u32 size); diff --git a/drivers/gpu/drm/ast/ast_main.c b/drivers/gpu/drm/ast/ast_main.c index 3775fe26f792..3c072c6589a2 100644 --- a/drivers/gpu/drm/ast/ast_main.c +++ b/drivers/gpu/drm/ast/ast_main.c @@ -96,6 +96,10 @@ static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev) jregd0 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff); jregd1 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff); if (!(jregd0 & 0x80) || !(jregd1 & 0x10)) {

• /* Patch AST2500 */
  

• if (((dev->pdev->revision & 0xF0) == 0x40) && ((jregd0 & 0xC0) == 0))
  

The field dev->pdev is considered deprecated. Instead, you can get the CP device from dev->dev like this

struct pci_dev *pdev = to_pci_dev(dev->dev);

It's the same instance, but dev->pdev will removed soon.

• 	patch_ahb_ast2500(ast);
  

• /* Double check it's actually working */ data = ast_read32(ast, 0xf004); if (data != 0xFFFFFFFF) {

diff --git a/drivers/gpu/drm/ast/ast_post.c b/drivers/gpu/drm/ast/ast_post.c index 8902c2f84bf9..2d121c5b2233 100644 --- a/drivers/gpu/drm/ast/ast_post.c +++ b/drivers/gpu/drm/ast/ast_post.c @@ -2026,6 +2026,33 @@ static bool ast_dram_init_2500(struct ast_private *ast) return true; }

+void patch_ahb_ast2500(struct ast_private *ast) +{

• u32 data;

+patch_ahb_lock:

• /* Clear bus lock condition */
• ast_moutdwm(ast, 0x1e600000, 0xAEED1A03);
• ast_moutdwm(ast, 0x1e600084, 0x00010000);
• ast_moutdwm(ast, 0x1e600088, 0x00000000);
• ast_moutdwm(ast, 0x1e6e2000, 0x1688A8A8);
• data = ast_mindwm(ast, 0x1e6e2070);
• if (data & 0x08000000) { /* check fast reset */

• ast_moutdwm(ast, 0x1E785004, 0x00000010);
  

• ast_moutdwm(ast, 0x1E785008, 0x00004755);
  

• ast_moutdwm(ast, 0x1E78500c, 0x00000033);
  

• udelay(1000);
  

• }
• ast_moutdwm(ast, 0x1e6e2000, 0x1688A8A8);
• do {

• data = ast_mindwm(ast, 0x1e6e2000);
  

• if (data == 0xffffffff)
  

• 	goto patch_ahb_lock;
  

• } while (data != 1);
• ast_moutdwm(ast, 0x1e6e207c, 0x08000000); /* clear fast reset */

+}

• void ast_post_chip_2500(struct drm_device *dev) { struct ast_private *ast = to_ast_private(dev);

@@ -2033,39 +2060,32 @@ void ast_post_chip_2500(struct drm_device *dev) u8 reg;

reg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff);

• if ((reg & 0x80) == 0) {/* vga only */

• if ((reg & 0xC0) == 0) {/* vga only */ /* Clear bus lock condition */

• ast_moutdwm(ast, 0x1e600000, 0xAEED1A03);
  

• ast_moutdwm(ast, 0x1e600084, 0x00010000);
  

• ast_moutdwm(ast, 0x1e600088, 0x00000000);
  

• ast_moutdwm(ast, 0x1e6e2000, 0x1688A8A8);
  

• ast_write32(ast, 0xf004, 0x1e6e0000);
  

• ast_write32(ast, 0xf000, 0x1);
  

• ast_write32(ast, 0x12000, 0x1688a8a8);
  

• while (ast_read32(ast, 0x12000) != 0x1)
  

• 	;
  

• ast_write32(ast, 0x10000, 0xfc600309);
  

• while (ast_read32(ast, 0x10000) != 0x1)
  

• 	;
  

• patch_ahb_ast2500(ast);
  

• /* Disable watchdog */
  

• ast_moutdwm(ast, 0x1E78502C, 0x00000000);
  

• ast_moutdwm(ast, 0x1E78504C, 0x00000000);
  

• /* Reset USB port */
  

• ast_moutdwm(ast, 0x1E6E2090, 0x20000000);		/* add at V1.2 */
  

• ast_moutdwm(ast, 0x1E6E2094, 0x00004000);		/* add at V1.2 */
  

• if (ast_mindwm(ast, 0x1E6E2070) & 0x00800000) {		/* add at V1.2 */
  

• 	ast_moutdwm(ast, 0x1E6E207C, 0x00800000);	/* add at V1.2 */
  

• 	mdelay(100);					/* add at V1.2 */
  

• 	ast_moutdwm(ast, 0x1E6E2070, 0x00800000);	/* add at V1.2 */
  

• }							/* add at V1.2 */
  

• /* Modify eSPI reset pin */
  

• temp = ast_mindwm(ast, 0x1E6E2070);			/* add at V1.3 */
  

• if (temp & 0x02000000) {				/* add at V1.3 */
  

• 	ast_moutdwm(ast, 0x1E6E207C, 0x00004000);	/* add at V1.3 */
  

• }
  

Do these v1.2 and v1.3 code paths not need a version check in the code?

Best regards Thomas

/* Slow down CPU/AHB CLK in VGA only mode */
temp = ast_read32(ast, 0x12008);
temp |= 0x73;
ast_write32(ast, 0x12008, temp);

• /* Reset USB port to patch USB unknown device issue */
  

• ast_moutdwm(ast, 0x1e6e2090, 0x20000000);
  

• temp  = ast_mindwm(ast, 0x1e6e2094);
  

• temp |= 0x00004000;
  

• ast_moutdwm(ast, 0x1e6e2094, temp);
  

• temp  = ast_mindwm(ast, 0x1e6e2070);
  

• if (temp & 0x00800000) {
  

• 	ast_moutdwm(ast, 0x1e6e207c, 0x00800000);
  

• 	mdelay(100);
  

• 	ast_moutdwm(ast, 0x1e6e2070, 0x00800000);
  

• }
  

• if (!ast_dram_init_2500(ast)) drm_err(dev, "DRAM init failed !\n");

-- 2.18.4

---

dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel