When configuring the tearcheck, the parameters for the engine were being set mostly as they should've been, but then it wasn't getting configured to get the vsync indication from the TE GPIO input because it was assumed that autorefresh could be enabled: since a previous commit makes sure to disable the autorefresh bit when committing to the cmd engine, it is now safe to just enable the vsync pin input at tearcheck setup time (instead of erroneously never enabling it).
Also, set the right sync_cfg_height to enable the DPU auto-generated TE signal in order to avoid stalls in the event that we miss one external TE signal: this will still trigger recovery mechanisms in case the display is really unreachable.
Signed-off-by: AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org --- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c index 4d3481baaead..665eb1d4cb8a 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c @@ -372,15 +372,12 @@ static void dpu_encoder_phys_cmd_tearcheck_config( tc_cfg.vsync_count = vsync_hz / (mode->vtotal * drm_mode_vrefresh(mode));
- /* enable external TE after kickoff to avoid premature autorefresh */ - tc_cfg.hw_vsync_mode = 0; - /* - * By setting sync_cfg_height to near max register value, we essentially - * disable dpu hw generated TE signal, since hw TE will arrive first. - * Only caveat is if due to error, we hit wrap-around. + * Set the sync_cfg_height to twice vtotal so that if we lose a + * TE event coming from the display TE pin we won't stall immediately */ - tc_cfg.sync_cfg_height = 0xFFF0; + tc_cfg.hw_vsync_mode = 1; + tc_cfg.sync_cfg_height = mode->vtotal * 2; tc_cfg.vsync_init_val = mode->vdisplay; tc_cfg.sync_threshold_start = DEFAULT_TEARCHECK_SYNC_THRESH_START; tc_cfg.sync_threshold_continue = DEFAULT_TEARCHECK_SYNC_THRESH_CONTINUE;