On Mon, 05 Apr 2021 16:36:09 +0530, Krishna Manikandan wrote:
Add YAML schema for the device tree bindings for DSI PHY.
Signed-off-by: Krishna Manikandan mkrishn@codeaurora.org
Changes in v1:
- Merge dsi-phy.yaml and dsi-phy-10nm.yaml (Stephen Boyd)
- Remove qcom,dsi-phy-regulator-ldo-mode (Stephen Boyd)
- Add clock cells properly (Stephen Boyd)
- Remove unnecessary decription from clock names (Stephen Boyd)
- Add pin names for the supply entries for 10nm phy which is used in sc7180 and sdm845 (Stephen Boyd)
- Remove unused header files from examples (Stephen Boyd)
- Drop labels for display nodes and correct node name (Stephen Boyd)
Changes in v2:
- Drop maxItems for clock (Stephen Boyd)
- Add vdds supply pin information for sdm845 (Stephen Boyd)
- Add examples for 14nm, 20nm and 28nm phy yaml files (Stephen Boyd)
- Keep child nodes directly under soc node (Stephen Boyd)
Changes in v3:
- Use a separate yaml file to describe the common properties for all the dsi phy versions (Stephen Boyd)
- Remove soc from examples (Stephen Boyd)
- Add description for register property
Changes in v4:
- Modify the title for all the phy versions (Stephen Boyd)
- Drop description for all the phy versions (Stephen Boyd)
- Modify the description for register property (Stephen Boyd)
Changes in v5:
- Remove unused properties from common dsi phy file
- Add clock-cells and phy-cells to required property list (Stephen Boyd)
.../bindings/display/msm/dsi-phy-10nm.yaml | 68 +++++++++++++++++++++ .../bindings/display/msm/dsi-phy-14nm.yaml | 66 ++++++++++++++++++++ .../bindings/display/msm/dsi-phy-20nm.yaml | 71 ++++++++++++++++++++++ .../bindings/display/msm/dsi-phy-28nm.yaml | 68 +++++++++++++++++++++ .../bindings/display/msm/dsi-phy-common.yaml | 40 ++++++++++++ 5 files changed, 313 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors: Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.example.dt.yaml:0:0: /example-0/dsi-phy@fd922a00: failed to match any schema with compatible: ['qcom,dsi-phy-28nm']
See https://patchwork.ozlabs.org/patch/1462327
This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:
pip3 install dtschema --upgrade
Please check and re-submit.