On Wed, 28 Apr 2021 at 10:13, Frieder Schrempf frieder.schrempf@kontron.de wrote:
On 28.04.21 09:51, Frieder Schrempf wrote:
On 22.04.21 00:31, Marek Vasut wrote:
Add driver for TI SN65DSI83 Single-link DSI to Single-link LVDS bridge and TI SN65DSI84 Single-link DSI to Dual-link or 2x Single-link LVDS bridge. TI SN65DSI85 is unsupported due to lack of hardware to test on, but easy to add.
The driver operates the chip via I2C bus. Currently the LVDS clock are always derived from DSI clock lane, which is the usual mode of operation. Support for clock from external oscillator is not implemented, but it is easy to add if ever needed. Only RGB888 pixel format is implemented, the LVDS666 is not supported, but could be added if needed.
Signed-off-by: Marek Vasut marex@denx.de Cc: Douglas Anderson dianders@chromium.org Cc: Jagan Teki jagan@amarulasolutions.com Cc: Laurent Pinchart laurent.pinchart@ideasonboard.com Cc: Linus Walleij linus.walleij@linaro.org Cc: Philippe Schenker philippe.schenker@toradex.com Cc: Sam Ravnborg sam@ravnborg.org Cc: Stephen Boyd swboyd@chromium.org Cc: Valentin Raevsky valentin@compulab.co.il To: dri-devel@lists.freedesktop.org Tested-by: Loic Poulain loic.poulain@linaro.org
V2: - Use dev_err_probe() - Set REG_RC_RESET as volatile - Wait for PLL stabilization by polling REG_RC_LVDS_PLL - Use ctx->mode = *adj instead of *mode in sn65dsi83_mode_set - Add tested DSI84 support in dual-link mode - Correctly set VCOM - Fill in missing DSI CHB and LVDS CHB bits from DSI84 and DSI85 datasheets, with that all the reserved bits make far more sense as the DSI83 and DSI84 seems to be reduced version of DSI85
drivers/gpu/drm/bridge/Kconfig | 10 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/ti-sn65dsi83.c | 617 ++++++++++++++++++++++++++ 3 files changed, 628 insertions(+) create mode 100644 drivers/gpu/drm/bridge/ti-sn65dsi83.c
[...]
+static int sn65dsi83_probe(struct i2c_client *client,
const struct i2c_device_id *id)+{
- struct device *dev = &client->dev;
- enum sn65dsi83_model model;
- struct sn65dsi83 *ctx;
- int ret;
- ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
- if (!ctx)
return -ENOMEM;- ctx->dev = dev;
- if (dev->of_node)
model = (enum sn65dsi83_model)of_device_get_match_data(dev);- else
model = id->driver_data;- /* Default to dual-link LVDS on all but DSI83. */
- if (model != MODEL_SN65DSI83)
ctx->lvds_dual_link = true;What if I use the DSI84 with a single link LVDS? I can't see any way to configure that right now.
I assume the simplest way would be to use the "ti,sn65dsi83" compatible string in your dts, since the way you wired it is 'compatible' with sn65dsi83, right?
I just saw the note in the header of the driver that says that single link mode is unsupported for the DSI84.
I have hardware with a single link display and if I set ctx->lvds_dual_link = false it works just fine.
How is this supposed to be selected? Does it need an extra devicetree property? And would you mind adding single-link support in the next version or do you prefer adding it in a follow-up patch?
If this has to be supported I think the proper way would be to support two output ports in the dts (e.g. lvds0_out, lvds1_out), in the same way as supported by the 'advantech,idk-2121wr' panel.
Regards, Loic