Implement use GPIO and I2C driver to detect connector and fetch EDID via DDC.

Signed-off-by: lichenyang lichenyang@loongson.cn --- drivers/gpu/drm/loongson/Makefile | 3 +- drivers/gpu/drm/loongson/loongson_connector.c | 70 ++++- drivers/gpu/drm/loongson/loongson_drv.c | 16 +- drivers/gpu/drm/loongson/loongson_drv.h | 10 + drivers/gpu/drm/loongson/loongson_i2c.c | 280 ++++++++++++++++++ drivers/gpu/drm/loongson/loongson_i2c.h | 38 +++ 6 files changed, 410 insertions(+), 7 deletions(-) create mode 100644 drivers/gpu/drm/loongson/loongson_i2c.c create mode 100644 drivers/gpu/drm/loongson/loongson_i2c.h

diff --git a/drivers/gpu/drm/loongson/Makefile b/drivers/gpu/drm/loongson/Makefile index 22d063953b78..773b806e99a2 100644 --- a/drivers/gpu/drm/loongson/Makefile +++ b/drivers/gpu/drm/loongson/Makefile @@ -10,5 +10,6 @@ loongson-y := loongson_drv.o \ loongson_plane.o \ loongson_device.o \ loongson_connector.o \ - loongson_encoder.o + loongson_encoder.o \ + loongson_i2c.o obj-$(CONFIG_DRM_LOONGSON) += loongson.o diff --git a/drivers/gpu/drm/loongson/loongson_connector.c b/drivers/gpu/drm/loongson/loongson_connector.c index 6b1f0ffa33bd..2096a6ddc366 100644 --- a/drivers/gpu/drm/loongson/loongson_connector.c +++ b/drivers/gpu/drm/loongson/loongson_connector.c @@ -4,12 +4,65 @@

static int loongson_get_modes(struct drm_connector *connector) { - int count; + struct loongson_connector *lconnector; + struct i2c_adapter *adapter; + struct edid *edid = NULL; + u32 ret; + + lconnector = to_loongson_connector(connector); + adapter = lconnector->i2c->adapter;

- count = drm_add_modes_noedid(connector, 1920, 1080); - drm_set_preferred_mode(connector, 1024, 768); + if (adapter != NULL) + edid = drm_get_edid(connector, adapter); + else + DRM_DEBUG_KMS("get loongson connector adapter err\n");

- return count; + if (edid) { + drm_connector_update_edid_property(connector, edid); + ret = drm_add_edid_modes(connector, edid); + } else { + DRM_ERROR("Failed to read EDID\n"); + ret = drm_add_modes_noedid(connector, 1024, 768); + } + + return ret; +} + +static bool is_connected(struct loongson_connector *ls_connector) +{ + unsigned char start = 0x0; + struct i2c_adapter *adapter; + struct i2c_msg msgs = { + .addr = DDC_ADDR, + .flags = 0, + .len = 1, + .buf = &start, + }; + + if (!ls_connector->i2c) + return false; + + adapter = ls_connector->i2c->adapter; + if (i2c_transfer(adapter, &msgs, 1) != 1) { + DRM_DEBUG_KMS("display-%d not connect\n", ls_connector->id); + return false; + } + + return true; +} + +static enum drm_connector_status +loongson_detect(struct drm_connector *connector, bool force) +{ + struct loongson_connector *lconnector; + enum drm_connector_status ret = connector_status_disconnected; + + lconnector = to_loongson_connector(connector); + + if (is_connected(lconnector)) + ret = connector_status_connected; + + return ret; }

static const struct drm_connector_helper_funcs loongson_connector_helper = { @@ -17,6 +70,7 @@ static const struct drm_connector_helper_funcs loongson_connector_helper = { };

static const struct drm_connector_funcs loongson_connector_funcs = { + .detect = loongson_detect, .fill_modes = drm_helper_probe_single_connector_modes, .destroy = drm_connector_cleanup, .reset = drm_atomic_helper_connector_reset, @@ -37,11 +91,17 @@ int loongson_connector_init(struct loongson_device *ldev, int index)

lconnector->ldev = ldev; lconnector->id = index; + lconnector->i2c_id = index + DC_I2C_BASE; + + lconnector->i2c = loongson_i2c_bus_match(ldev, lconnector->i2c_id); + if (!lconnector->i2c) + DRM_INFO("connector-%d match i2c-%d err\n", index, + lconnector->i2c_id);

ldev->mode_info[index].connector = lconnector; connector = &lconnector->base; drm_connector_init(ldev->dev, connector, &loongson_connector_funcs, - DRM_MODE_CONNECTOR_Unknown); + DRM_MODE_CONNECTOR_Unknown); drm_connector_helper_add(connector, &loongson_connector_helper);

return 0; diff --git a/drivers/gpu/drm/loongson/loongson_drv.c b/drivers/gpu/drm/loongson/loongson_drv.c index e405199a3df6..252be9e25aff 100644 --- a/drivers/gpu/drm/loongson/loongson_drv.c +++ b/drivers/gpu/drm/loongson/loongson_drv.c @@ -11,9 +11,10 @@

/* Interface history: * 0.1 - original. + * 0.2 - add i2c and connector detect. */ #define DRIVER_MAJOR 0 -#define DRIVER_MINOR 1 +#define DRIVER_MINOR 2

static const struct drm_mode_config_funcs loongson_mode_funcs = { .fb_create = drm_gem_fb_create, @@ -31,6 +32,7 @@ static int loongson_device_init(struct drm_device *dev, uint32_t flags) resource_size_t aper_size; resource_size_t mmio_base; resource_size_t mmio_size; + u32 ret;

/* GPU MEM */ /* We need get 7A-gpu pci device information for ldev->gpu_pdev */ @@ -72,6 +74,18 @@ static int loongson_device_init(struct drm_device *dev, uint32_t flags) if (ldev->io == NULL) return -ENOMEM;

+ ret = loongson_dc_gpio_init(ldev); + if (ret) { + DRM_ERROR("Failed to initialize dc gpios\n"); + return ret; + } + + ret = loongson_i2c_init(ldev); + if (ret) { + DRM_ERROR("Failed to initialize dc i2c\n"); + return ret; + } + DRM_INFO("DC mmio base 0x%llx size 0x%llx io 0x%llx\n", mmio_base, mmio_size, *(u64 *)ldev->io); DRM_INFO("GPU vram start = 0x%x size = 0x%x\n", diff --git a/drivers/gpu/drm/loongson/loongson_drv.h b/drivers/gpu/drm/loongson/loongson_drv.h index 498d1b082a19..24a534c3c79c 100644 --- a/drivers/gpu/drm/loongson/loongson_drv.h +++ b/drivers/gpu/drm/loongson/loongson_drv.h @@ -18,6 +18,7 @@ #include <drm/drm_crtc_helper.h> #include <drm/drm_connector.h> #include <drm/drm_encoder.h> +#include "loongson_i2c.h"

/* General customization: */ @@ -28,6 +29,7 @@

#define to_loongson_crtc(x) container_of(x, struct loongson_crtc, base) #define to_loongson_encoder(x) container_of(x, struct loongson_encoder, base) +#define to_loongson_connector(x) container_of(x, struct loongson_connector, base)

#define LS7A_CHIPCFG_REG_BASE (0x10010000) #define PCI_DEVICE_ID_LOONGSON_DC 0x7a06 @@ -92,8 +94,10 @@ struct loongson_encoder { struct loongson_connector { struct drm_connector base; struct loongson_device *ldev; + struct loongson_i2c *i2c; u16 id; u32 type; + u16 i2c_id; };

struct loongson_mode_info { @@ -115,6 +119,9 @@ struct loongson_device { u32 num_crtc; struct loongson_mode_info mode_info[2]; struct pci_dev *gpu_pdev; /* LS7A gpu device info */ + + struct loongson_i2c i2c_bus[LS_MAX_I2C_BUS]; + struct gpio_chip chip; };

/* crtc */ @@ -129,6 +136,9 @@ int loongson_encoder_init(struct loongson_device *ldev, int index); /* plane */ int loongson_plane_init(struct loongson_crtc *lcrtc);

+/* i2c */ +int loongson_dc_gpio_init(struct loongson_device *ldev); + /* device */ u32 loongson_gpu_offset(struct drm_plane_state *state); u32 ls7a_mm_rreg(struct loongson_device *ldev, u32 offset); diff --git a/drivers/gpu/drm/loongson/loongson_i2c.c b/drivers/gpu/drm/loongson/loongson_i2c.c new file mode 100644 index 000000000000..ef06a6787e34 --- /dev/null +++ b/drivers/gpu/drm/loongson/loongson_i2c.c @@ -0,0 +1,280 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "loongson_i2c.h" +#include "loongson_drv.h" +#include "linux/gpio.h" +#include <linux/gpio/consumer.h> + +static struct gpio i2c_gpios[4] = { + { .gpio = DC_GPIO_0, .flags = GPIOF_OPEN_DRAIN, .label = "i2c-6-sda" }, + { .gpio = DC_GPIO_1, .flags = GPIOF_OPEN_DRAIN, .label = "i2c-6-scl" }, + { .gpio = DC_GPIO_2, .flags = GPIOF_OPEN_DRAIN, .label = "i2c-7-sda" }, + { .gpio = DC_GPIO_3, .flags = GPIOF_OPEN_DRAIN, .label = "i2c-7-scl" }, +}; + +static inline void __dc_gpio_set_dir(struct loongson_device *ldev, + unsigned int pin, int input) +{ + u32 temp; + + temp = ls7a_mm_rreg(ldev, LS7A_DC_GPIO_CFG_OFFSET); + + if (input) + temp |= 1UL << pin; + else + temp &= ~(1UL << pin); + + ls7a_mm_wreg(ldev, LS7A_DC_GPIO_CFG_OFFSET, temp); +} + +static void __dc_gpio_set_val(struct loongson_device *ldev, + unsigned int pin, int high) +{ + u32 temp; + + temp = ls7a_mm_rreg(ldev, LS7A_DC_GPIO_OUT_OFFSET); + + if (high) + temp |= 1UL << pin; + else + temp &= ~(1UL << pin); + + ls7a_mm_wreg(ldev, LS7A_DC_GPIO_OUT_OFFSET, temp); +} + +static int ls_dc_gpio_request(struct gpio_chip *chip, unsigned int pin) +{ + if (pin >= (chip->ngpio + chip->base)) + return -EINVAL; + else + return 0; +} + +static int ls_dc_gpio_dir_input(struct gpio_chip *chip, unsigned int pin) +{ + struct loongson_device *ldev; + + ldev = container_of(chip, struct loongson_device, chip); + __dc_gpio_set_dir(ldev, pin, 1); + + return 0; +} + +static int ls_dc_gpio_dir_output(struct gpio_chip *chip, + unsigned int pin, int value) +{ + struct loongson_device *ldev; + + ldev = container_of(chip, struct loongson_device, chip); + __dc_gpio_set_val(ldev, pin, value); + __dc_gpio_set_dir(ldev, pin, 0); + + return 0; +} + +static void ls_dc_gpio_set(struct gpio_chip *chip, unsigned int pin, int value) +{ + struct loongson_device *ldev; + + ldev = container_of(chip, struct loongson_device, chip); + __dc_gpio_set_val(ldev, pin, value); +} + +static int ls_dc_gpio_get(struct gpio_chip *chip, unsigned int pin) +{ + u32 val; + struct loongson_device *ldev; + + ldev = container_of(chip, struct loongson_device, chip); + val = ls7a_mm_rreg(ldev, LS7A_DC_GPIO_IN_OFFSET); + return (val >> pin) & 1; +} + +static void loongson_i2c_set_data(void *i2c, int value) +{ + struct loongson_i2c *li2c = i2c; + struct gpio_desc *gpiod = gpio_to_desc(i2c_gpios[li2c->data].gpio); + + gpiod_set_value_cansleep(gpiod, value); +} + +static void loongson_i2c_set_clock(void *i2c, int value) +{ + struct loongson_i2c *li2c = i2c; + struct gpio_desc *gpiod = gpio_to_desc(i2c_gpios[li2c->clock].gpio); + + gpiod_set_value_cansleep(gpiod, value); +} + +static int loongson_i2c_get_data(void *i2c) +{ + struct loongson_i2c *li2c = i2c; + struct gpio_desc *gpiod = gpio_to_desc(i2c_gpios[li2c->data].gpio); + + return gpiod_get_value_cansleep(gpiod); +} + +static int loongson_i2c_get_clock(void *i2c) +{ + struct loongson_i2c *li2c = i2c; + struct gpio_desc *gpiod = gpio_to_desc(i2c_gpios[li2c->clock].gpio); + + return gpiod_get_value_cansleep(gpiod); +} + +static int loongson_i2c_create(struct loongson_i2c *li2c, const char *name) +{ + int ret; + unsigned int i2c_num; + struct i2c_client *i2c_cli; + struct i2c_adapter *i2c_adapter; + struct i2c_board_info i2c_info; + struct i2c_algo_bit_data *i2c_algo_data; + struct device *dev; + + dev = &li2c->adapter->dev; + i2c_num = li2c->i2c_id; + i2c_adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL); + if (IS_ERR(i2c_adapter)) { + ret = PTR_ERR(i2c_adapter); + goto error_mem; + } + i2c_algo_data = kzalloc(sizeof(struct i2c_algo_bit_data), GFP_KERNEL); + if (IS_ERR(i2c_algo_data)) { + ret = PTR_ERR(i2c_algo_data); + goto error_mem; + } + + i2c_adapter->owner = THIS_MODULE; + i2c_adapter->class = I2C_CLASS_DDC; + i2c_adapter->algo_data = i2c_algo_data; + i2c_adapter->nr = i2c_num; + snprintf(i2c_adapter->name, sizeof(i2c_adapter->name), "%s%d", + name, i2c_num - DC_I2C_BASE); + + li2c->data = i2c_num % DC_I2C_BASE * 2; + li2c->clock = i2c_num % DC_I2C_BASE * 2 + 1; + DRM_INFO("Created i2c-%d, sda=%d, scl=%d\n", + i2c_num, li2c->data, li2c->clock); + + if (gpio_cansleep(i2c_gpios[li2c->data].gpio) || + gpio_cansleep(i2c_gpios[li2c->clock].gpio)) + dev_warn(dev, "Slow GPIO pins might wreak havoc I2C timing\n"); + + i2c_algo_data->setsda = loongson_i2c_set_data; + i2c_algo_data->setscl = loongson_i2c_set_clock; + i2c_algo_data->getsda = loongson_i2c_get_data; + i2c_algo_data->getscl = loongson_i2c_get_clock; + i2c_algo_data->udelay = DC_I2C_TON; + i2c_algo_data->timeout = usecs_to_jiffies(2200); + + ret = i2c_bit_add_numbered_bus(i2c_adapter); + if (ret) { + DRM_ERROR("Failed to register i2c algo-bit adapter %s\n", + i2c_adapter->name); + kfree(i2c_adapter); + i2c_adapter = NULL; + } + + li2c->adapter = i2c_adapter; + i2c_algo_data->data = li2c; + i2c_set_adapdata(li2c->adapter, li2c); + DRM_INFO("Register i2c algo-bit adapter [%s]\n", i2c_adapter->name); + + memset(&i2c_info, 0, sizeof(struct i2c_board_info)); + strncpy(i2c_info.type, name, I2C_NAME_SIZE); + i2c_info.addr = DDC_ADDR; + i2c_cli = i2c_new_client_device(i2c_adapter, &i2c_info); + if (i2c_cli == NULL) { + DRM_ERROR("Failed to create i2c adapter\n"); + return -EBUSY; + } + li2c->init = true; + return 0; + +error_mem: + DRM_ERROR("Failed to malloc memory for loongson i2c\n"); + return ret; +} + +static int loongson_i2c_add(struct loongson_device *ldev, const char *name) +{ + int i; + + for (i = 0; i < LS_MAX_I2C_BUS; i++) { + if (ldev->i2c_bus[i].use) + loongson_i2c_create(&ldev->i2c_bus[i], name); + else { + DRM_DEBUG_DRIVER("i2c_bus[%d] not use\n", i); + return -ENODEV; + } + } + return 0; +} + +int loongson_dc_gpio_init(struct loongson_device *ldev) +{ + int ret; + struct gpio_chip *chip; + + chip = &ldev->chip; + chip->label = "ls7a-dc-gpio"; + chip->base = LS7A_DC_GPIO_BASE; + chip->ngpio = 4; + chip->parent = ldev->dev->dev; + chip->request = ls_dc_gpio_request; + chip->direction_input = ls_dc_gpio_dir_input; + chip->direction_output = ls_dc_gpio_dir_output; + chip->set = ls_dc_gpio_set; + chip->get = ls_dc_gpio_get; + chip->can_sleep = false; + + ret = devm_gpiochip_add_data(ldev->dev->dev, chip, ldev); + if (ret) { + DRM_ERROR("Failed to register ls7a dc gpio driver\n"); + return -ENODEV; + } + DRM_INFO("Registered ls7a dc gpio driver\n"); + + return 0; +} + +int loongson_i2c_init(struct loongson_device *ldev) +{ + int ret; + + ret = gpio_request_array(i2c_gpios, ARRAY_SIZE(i2c_gpios)); + if (ret) { + DRM_ERROR("Failed to request gpio array i2c_gpios\n"); + return -ENODEV; + } + + ldev->i2c_bus[0].i2c_id = 6; + ldev->i2c_bus[0].use = true; + ldev->i2c_bus[1].i2c_id = 7; + ldev->i2c_bus[1].use = true; + + loongson_i2c_add(ldev, DC_I2C_NAME); + + return 0; +} + +struct loongson_i2c *loongson_i2c_bus_match(struct loongson_device *ldev, u32 i2c_id) +{ + u32 i; + struct loongson_i2c *match = NULL, *tables; + + tables = ldev->i2c_bus; + + for (i = 0; i < LS_MAX_I2C_BUS; i++) { + if (tables->i2c_id == i2c_id && tables->init == true) { + match = tables; + break; + } + + tables++; + } + + return match; +} + diff --git a/drivers/gpu/drm/loongson/loongson_i2c.h b/drivers/gpu/drm/loongson/loongson_i2c.h new file mode 100644 index 000000000000..50d4d3f4b10f --- /dev/null +++ b/drivers/gpu/drm/loongson/loongson_i2c.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef __LOONGSON_I2C_H__ +#define __LOONGSON_I2C_H__ + +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <linux/gpio/driver.h> +#include <drm/drm_edid.h> + +#define DC_I2C_TON 5 +#define DC_I2C_BASE 6 +#define DC_I2C_NAME "ls_dc_i2c" +#define LS_MAX_I2C_BUS 16 + +/* Loongson 7A display controller proprietary GPIOs */ +#define LS7A_DC_GPIO_BASE 73 +#define DC_GPIO_0 (73) +#define DC_GPIO_1 (74) +#define DC_GPIO_2 (75) +#define DC_GPIO_3 (76) +#define LS7A_DC_GPIO_CFG_OFFSET (0x1660) +#define LS7A_DC_GPIO_IN_OFFSET (0x1650) +#define LS7A_DC_GPIO_OUT_OFFSET (0x1650) + +struct loongson_device; +struct loongson_i2c { + struct i2c_adapter *adapter; + u32 data, clock; + bool use, init; + u32 i2c_id; +}; + +struct loongson_i2c *loongson_i2c_bus_match(struct loongson_device *ldev, + u32 i2c_id); +int loongson_i2c_init(struct loongson_device *ldev); + +#endif /* __LOONGSON_I2C_H__ */