1) add regulator_set_load() to eDP phy 2) add regulator_set_load() to DP phy 3) remove vdda related function out of eDP/DP controller
Kuogee Hsieh (3): phy: qcom-edp: add regulator_set_load to edp phy phy: qcom-qmp: add regulator_set_load to dp phy drm/msm/dp: delete vdda regulator related functions from eDP/DP controller
drivers/gpu/drm/msm/dp/dp_parser.c | 14 ------ drivers/gpu/drm/msm/dp/dp_parser.h | 8 ---- drivers/gpu/drm/msm/dp/dp_power.c | 95 +------------------------------------ drivers/phy/qualcomm/phy-qcom-edp.c | 12 +++++ drivers/phy/qualcomm/phy-qcom-qmp.c | 40 ++++++++++++---- 5 files changed, 45 insertions(+), 124 deletions(-)
This patch add regulator_set_load() before enable regulator at eDP phy driver.
Signed-off-by: Kuogee Hsieh quic_khsieh@quicinc.com Reviewed-by: Douglas Anderson dianders@chromium.org --- drivers/phy/qualcomm/phy-qcom-edp.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c index cacd32f..7e357078 100644 --- a/drivers/phy/qualcomm/phy-qcom-edp.c +++ b/drivers/phy/qualcomm/phy-qcom-edp.c @@ -639,6 +639,18 @@ static int qcom_edp_phy_probe(struct platform_device *pdev) if (ret) return ret;
+ ret = regulator_set_load(edp->supplies[0].consumer, 21800); /* 1.2 V vdda-phy */ + if (ret) { + dev_err(dev, "failed to set load at %s\n", edp->supplies[0].supply); + return ret; + } + + ret = regulator_set_load(edp->supplies[1].consumer, 36000); /* 0.9 V vdda-pll */ + if (ret) { + dev_err(dev, "failed to set load at %s\n", edp->supplies[1].supply); + return ret; + } + ret = qcom_edp_clks_register(edp, pdev->dev.of_node); if (ret) return ret;
On 26/05/2022 00:02, Kuogee Hsieh wrote:
This patch add regulator_set_load() before enable regulator at eDP phy driver.
Signed-off-by: Kuogee Hsieh quic_khsieh@quicinc.com Reviewed-by: Douglas Anderson dianders@chromium.org
Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org
drivers/phy/qualcomm/phy-qcom-edp.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
Quoting Kuogee Hsieh (2022-05-25 14:02:18)
This patch add regulator_set_load() before enable regulator at eDP phy driver.
Signed-off-by: Kuogee Hsieh quic_khsieh@quicinc.com Reviewed-by: Douglas Anderson dianders@chromium.org
Reviewed-by: Stephen Boyd swboyd@chromium.org
On Wed 25 May 14:02 PDT 2022, Kuogee Hsieh wrote:
This patch add regulator_set_load() before enable regulator at eDP phy driver.
Signed-off-by: Kuogee Hsieh quic_khsieh@quicinc.com Reviewed-by: Douglas Anderson dianders@chromium.org
Reviewed-by: Bjorn Andersson bjorn.andersson@linaro.org
drivers/phy/qualcomm/phy-qcom-edp.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c index cacd32f..7e357078 100644 --- a/drivers/phy/qualcomm/phy-qcom-edp.c +++ b/drivers/phy/qualcomm/phy-qcom-edp.c @@ -639,6 +639,18 @@ static int qcom_edp_phy_probe(struct platform_device *pdev) if (ret) return ret;
- ret = regulator_set_load(edp->supplies[0].consumer, 21800); /* 1.2 V vdda-phy */
- if (ret) {
dev_err(dev, "failed to set load at %s\n", edp->supplies[0].supply);return ret;- }
- ret = regulator_set_load(edp->supplies[1].consumer, 36000); /* 0.9 V vdda-pll */
- if (ret) {
dev_err(dev, "failed to set load at %s\n", edp->supplies[1].supply);return ret;- }
- ret = qcom_edp_clks_register(edp, pdev->dev.of_node); if (ret) return ret;
-- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
This patch add regulator_set_load() before enable regulator at DP phy driver.
Signed-off-by: Kuogee Hsieh quic_khsieh@quicinc.com Reviewed-by: Stephen Boyd swboyd@chromium.org Reviewed-by: Douglas Anderson dianders@chromium.org --- drivers/phy/qualcomm/phy-qcom-qmp.c | 40 ++++++++++++++++++++++++++++--------- 1 file changed, 31 insertions(+), 9 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index b144ae1..26b290c 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -3075,6 +3075,17 @@ static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_misc_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_PRE_GAIN, 0x2e), };
+/* list of regulators */ +struct qmp_regulator_data { + const char *name; + unsigned int enable_load; +}; + +struct qmp_regulator_data qmp_phy_vreg_l[] = { + { .name = "vdda-phy", .enable_load = 21800 }, + { .name = "vdda-pll", .enable_load = 36000 }, +}; + struct qmp_phy;
/* struct qmp_phy_cfg - per-PHY initialization config */ @@ -3129,7 +3140,7 @@ struct qmp_phy_cfg { const char * const *reset_list; int num_resets; /* regulators to be requested */ - const char * const *vreg_list; + const struct qmp_regulator_data *vreg_list; int num_vregs;
/* array of registers with different offsets */ @@ -3341,11 +3352,6 @@ static const char * const sdm845_pciephy_reset_l[] = { "phy", };
-/* list of regulators */ -static const char * const qmp_phy_vreg_l[] = { - "vdda-phy", "vdda-pll", -}; - static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = { .type = PHY_TYPE_USB3, .nlanes = 1, @@ -5488,16 +5494,32 @@ static int qcom_qmp_phy_vreg_init(struct device *dev, const struct qmp_phy_cfg * { struct qcom_qmp *qmp = dev_get_drvdata(dev); int num = cfg->num_vregs; - int i; + int ret, i;
qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL); if (!qmp->vregs) return -ENOMEM;
for (i = 0; i < num; i++) - qmp->vregs[i].supply = cfg->vreg_list[i]; + qmp->vregs[i].supply = cfg->vreg_list[i].name;
- return devm_regulator_bulk_get(dev, num, qmp->vregs); + ret = devm_regulator_bulk_get(dev, num, qmp->vregs); + if (ret) { + dev_err(dev, "failed at devm_regulator_bulk_get\n"); + return ret; + } + + for (i = 0; i < num; i++) { + ret = regulator_set_load(qmp->vregs[i].consumer, + cfg->vreg_list[i].enable_load); + if (ret) { + dev_err(dev, "failed to set load at %s\n", + qmp->vregs[i].supply); + return ret; + } + } + + return 0; }
static int qcom_qmp_phy_reset_init(struct device *dev, const struct qmp_phy_cfg *cfg)
Vdda regulators are related to both eDP and DP phy so that it should be managed at eDP and DP phy driver instead of controller. This patch removes vdda regulators related functions out of eDP/DP controller.
Signed-off-by: Kuogee Hsieh quic_khsieh@quicinc.com Reviewed-by: Stephen Boyd swboyd@chromium.org Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Reviewed-by: Douglas Anderson dianders@chromium.org --- drivers/gpu/drm/msm/dp/dp_parser.c | 14 ------ drivers/gpu/drm/msm/dp/dp_parser.h | 8 ---- drivers/gpu/drm/msm/dp/dp_power.c | 95 +------------------------------------- 3 files changed, 2 insertions(+), 115 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c b/drivers/gpu/drm/msm/dp/dp_parser.c index 8f9fed9..4ef2130 100644 --- a/drivers/gpu/drm/msm/dp/dp_parser.c +++ b/drivers/gpu/drm/msm/dp/dp_parser.c @@ -22,14 +22,6 @@ #define DP_DEFAULT_P0_OFFSET 0x1000 #define DP_DEFAULT_P0_SIZE 0x0400
-static const struct dp_regulator_cfg sdm845_dp_reg_cfg = { - .num = 2, - .regs = { - {"vdda-1p2", 21800, 4 }, /* 1.2 V */ - {"vdda-0p9", 36000, 32 }, /* 0.9 V */ - }, -}; - static void __iomem *dp_ioremap(struct platform_device *pdev, int idx, size_t *len) { struct resource *res; @@ -298,12 +290,6 @@ static int dp_parser_parse(struct dp_parser *parser) if (rc) return rc;
- /* Map the corresponding regulator information according to - * version. Currently, since we only have one supported platform, - * mapping the regulator directly. - */ - parser->regulator_cfg = &sdm845_dp_reg_cfg; - return 0; }
diff --git a/drivers/gpu/drm/msm/dp/dp_parser.h b/drivers/gpu/drm/msm/dp/dp_parser.h index 3a4d797..47430e3 100644 --- a/drivers/gpu/drm/msm/dp/dp_parser.h +++ b/drivers/gpu/drm/msm/dp/dp_parser.h @@ -92,8 +92,6 @@ struct dp_pinctrl { struct pinctrl_state *state_suspend; };
-#define DP_DEV_REGULATOR_MAX 4 - /* Regulators for DP devices */ struct dp_reg_entry { char name[32]; @@ -101,11 +99,6 @@ struct dp_reg_entry { int disable_load; };
-struct dp_regulator_cfg { - int num; - struct dp_reg_entry regs[DP_DEV_REGULATOR_MAX]; -}; - /** * struct dp_parser - DP parser's data exposed to clients * @@ -121,7 +114,6 @@ struct dp_parser { struct dp_pinctrl pinctrl; struct dp_io io; struct dp_display_data disp_data; - const struct dp_regulator_cfg *regulator_cfg; u32 max_dp_lanes; struct drm_bridge *next_bridge;
diff --git a/drivers/gpu/drm/msm/dp/dp_power.c b/drivers/gpu/drm/msm/dp/dp_power.c index d9e0117..b52ac1d 100644 --- a/drivers/gpu/drm/msm/dp/dp_power.c +++ b/drivers/gpu/drm/msm/dp/dp_power.c @@ -20,82 +20,10 @@ struct dp_power_private { struct clk *link_clk_src; struct clk *pixel_provider; struct clk *link_provider; - struct regulator_bulk_data supplies[DP_DEV_REGULATOR_MAX];
struct dp_power dp_power; };
-static void dp_power_regulator_disable(struct dp_power_private *power) -{ - struct regulator_bulk_data *s = power->supplies; - const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs; - int num = power->parser->regulator_cfg->num; - int i; - - DBG(""); - for (i = num - 1; i >= 0; i--) - if (regs[i].disable_load >= 0) - regulator_set_load(s[i].consumer, - regs[i].disable_load); - - regulator_bulk_disable(num, s); -} - -static int dp_power_regulator_enable(struct dp_power_private *power) -{ - struct regulator_bulk_data *s = power->supplies; - const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs; - int num = power->parser->regulator_cfg->num; - int ret, i; - - DBG(""); - for (i = 0; i < num; i++) { - if (regs[i].enable_load >= 0) { - ret = regulator_set_load(s[i].consumer, - regs[i].enable_load); - if (ret < 0) { - pr_err("regulator %d set op mode failed, %d\n", - i, ret); - goto fail; - } - } - } - - ret = regulator_bulk_enable(num, s); - if (ret < 0) { - pr_err("regulator enable failed, %d\n", ret); - goto fail; - } - - return 0; - -fail: - for (i--; i >= 0; i--) - regulator_set_load(s[i].consumer, regs[i].disable_load); - return ret; -} - -static int dp_power_regulator_init(struct dp_power_private *power) -{ - struct regulator_bulk_data *s = power->supplies; - const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs; - struct platform_device *pdev = power->pdev; - int num = power->parser->regulator_cfg->num; - int i, ret; - - for (i = 0; i < num; i++) - s[i].supply = regs[i].name; - - ret = devm_regulator_bulk_get(&pdev->dev, num, s); - if (ret < 0) { - pr_err("%s: failed to init regulator, ret=%d\n", - __func__, ret); - return ret; - } - - return 0; -} - static int dp_power_clk_init(struct dp_power_private *power) { int rc = 0; @@ -318,21 +246,10 @@ int dp_power_client_init(struct dp_power *dp_power)
pm_runtime_enable(&power->pdev->dev);
- rc = dp_power_regulator_init(power); - if (rc) { - DRM_ERROR("failed to init regulators %d\n", rc); - goto error; - } - rc = dp_power_clk_init(power); - if (rc) { + if (rc) DRM_ERROR("failed to init clocks %d\n", rc); - goto error; - } - return 0;
-error: - pm_runtime_disable(&power->pdev->dev); return rc; }
@@ -365,22 +282,15 @@ int dp_power_init(struct dp_power *dp_power, bool flip) power = container_of(dp_power, struct dp_power_private, dp_power);
pm_runtime_get_sync(&power->pdev->dev); - rc = dp_power_regulator_enable(power); - if (rc) { - DRM_ERROR("failed to enable regulators, %d\n", rc); - goto exit; - }
rc = dp_power_clk_enable(dp_power, DP_CORE_PM, true); if (rc) { DRM_ERROR("failed to enable DP core clocks, %d\n", rc); - goto err_clk; + goto exit; }
return 0;
-err_clk: - dp_power_regulator_disable(power); exit: pm_runtime_put_sync(&power->pdev->dev); return rc; @@ -393,7 +303,6 @@ int dp_power_deinit(struct dp_power *dp_power) power = container_of(dp_power, struct dp_power_private, dp_power);
dp_power_clk_enable(dp_power, DP_CORE_PM, false); - dp_power_regulator_disable(power); pm_runtime_put_sync(&power->pdev->dev); return 0; }
On 25-05-22, 14:02, Kuogee Hsieh wrote:
- add regulator_set_load() to eDP phy
- add regulator_set_load() to DP phy
- remove vdda related function out of eDP/DP controller
Kuogee Hsieh (3): phy: qcom-edp: add regulator_set_load to edp phy phy: qcom-qmp: add regulator_set_load to dp phy drm/msm/dp: delete vdda regulator related functions from eDP/DP controller
drivers/gpu/drm/msm/dp/dp_parser.c | 14 ------ drivers/gpu/drm/msm/dp/dp_parser.h | 8 ---- drivers/gpu/drm/msm/dp/dp_power.c | 95 +------------------------------------ drivers/phy/qualcomm/phy-qcom-edp.c | 12 +++++ drivers/phy/qualcomm/phy-qcom-qmp.c | 40 ++++++++++++----
Please rebase this to phy-next and apply to specific qmp phy driver...
On 6/16/2022 5:02 PM, Vinod Koul wrote:
On 25-05-22, 14:02, Kuogee Hsieh wrote:
- add regulator_set_load() to eDP phy
- add regulator_set_load() to DP phy
- remove vdda related function out of eDP/DP controller
Kuogee Hsieh (3): phy: qcom-edp: add regulator_set_load to edp phy phy: qcom-qmp: add regulator_set_load to dp phy drm/msm/dp: delete vdda regulator related functions from eDP/DP controller
drivers/gpu/drm/msm/dp/dp_parser.c | 14 ------ drivers/gpu/drm/msm/dp/dp_parser.h | 8 ---- drivers/gpu/drm/msm/dp/dp_power.c | 95 +------------------------------------ drivers/phy/qualcomm/phy-qcom-edp.c | 12 +++++ drivers/phy/qualcomm/phy-qcom-qmp.c | 40 ++++++++++++----
Please rebase this to phy-next and apply to specific qmp phy driver...
I will rebase to ==> https://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy.git
On 6/20/2022 1:07 PM, Kuogee Hsieh wrote:
On 6/16/2022 5:02 PM, Vinod Koul wrote:
On 25-05-22, 14:02, Kuogee Hsieh wrote:
- add regulator_set_load() to eDP phy
- add regulator_set_load() to DP phy
- remove vdda related function out of eDP/DP controller
Kuogee Hsieh (3): phy: qcom-edp: add regulator_set_load to edp phy phy: qcom-qmp: add regulator_set_load to dp phy drm/msm/dp: delete vdda regulator related functions from eDP/DP controller
drivers/gpu/drm/msm/dp/dp_parser.c | 14 ------ drivers/gpu/drm/msm/dp/dp_parser.h | 8 ---- drivers/gpu/drm/msm/dp/dp_power.c | 95 +------------------------------------ drivers/phy/qualcomm/phy-qcom-edp.c | 12 +++++ drivers/phy/qualcomm/phy-qcom-qmp.c | 40 ++++++++++++----
Please rebase this to phy-next and apply to specific qmp phy driver...
I will rebase to ==> https://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy.git
Hi Vinod,
Would you please specify exactly procedures i have to do as to rebase this patch series to phy=next tree.
On 20-06-22, 13:43, Kuogee Hsieh wrote:
On 6/20/2022 1:07 PM, Kuogee Hsieh wrote:
On 6/16/2022 5:02 PM, Vinod Koul wrote:
On 25-05-22, 14:02, Kuogee Hsieh wrote:
- add regulator_set_load() to eDP phy
- add regulator_set_load() to DP phy
- remove vdda related function out of eDP/DP controller
Kuogee Hsieh (3): phy: qcom-edp: add regulator_set_load to edp phy phy: qcom-qmp: add regulator_set_load to dp phy drm/msm/dp: delete vdda regulator related functions from eDP/DP controller
drivers/gpu/drm/msm/dp/dp_parser.c | 14 ------ drivers/gpu/drm/msm/dp/dp_parser.h | 8 ---- drivers/gpu/drm/msm/dp/dp_power.c | 95 +------------------------------------ drivers/phy/qualcomm/phy-qcom-edp.c | 12 +++++ drivers/phy/qualcomm/phy-qcom-qmp.c | 40 ++++++++++++----
Please rebase this to phy-next and apply to specific qmp phy driver...
I will rebase to ==> https://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy.git
Hi Vinod,
Would you please specify exactly procedures i have to do as to rebase this patch series to phy=next tree.
Yes pls rebase to above tree and next branch
dri-devel@lists.freedesktop.org
-
Bjorn Andersson -
Dmitry Baryshkov -
Kuogee Hsieh -
Stephen Boyd -
Vinod Koul