This series introduces a binding for Type-C data lane switches. These control the routing and operating modes of USB Type-C data lanes based on the PD messaging from the Type-C port driver regarding connected peripherals.
The first patch introduces a change to the Type-C mux class mode-switch matching code, while the second adds a config guard to a Type-C header. The next couple of patches introduce the new "typec-switch" binding as well as one user of it (the ANX7625 drm bridge).
The remaining patches add functionality to the anx7625 driver to register the mode-switches, as well as program its crosspoint switch depending on which Type-C port has a DisplayPort (DP) peripheral connected to it.
v2: https://lore.kernel.org/linux-usb/20220609181106.3695103-1-pmalani@chromium....
Changes since v2: - Addressed review comments in typec_mux.h - Changed error print to only print when a device is actually listed in DT. - Moved num_typec_switches check to beginning of function. - Picked up Reviewed-by and Tested-by tags from v2.
Pin-Yen Lin (1): drm/bridge: anx7625: Add typec_mux_set callback function
Prashant Malani (6): usb: typec: mux: Allow muxes to specify mode-switch usb: typec: mux: Add CONFIG guards for functions dt-bindings: usb: Add Type-C switch binding dt-bindings: drm/bridge: anx7625: Add mode-switch support drm/bridge: anx7625: Register number of Type C switches drm/bridge: anx7625: Register Type-C mode switches
.../display/bridge/analogix,anx7625.yaml | 63 ++++++++ .../devicetree/bindings/usb/typec-switch.yaml | 74 +++++++++ drivers/gpu/drm/bridge/analogix/anx7625.c | 148 ++++++++++++++++++ drivers/gpu/drm/bridge/analogix/anx7625.h | 20 +++ drivers/usb/typec/mux.c | 8 +- include/linux/usb/typec_mux.h | 44 +++++- 6 files changed, 349 insertions(+), 8 deletions(-) create mode 100644 Documentation/devicetree/bindings/usb/typec-switch.yaml
Loosen the typec_mux_match() requirements so that searches where an alt mode is not specified, but the target mux device lists the "mode-switch" property, return a success.
This is helpful in Type C port drivers which would like to get a pointer to the mux switch associated with a Type C port, but don't want to specify a particular alt mode.
Signed-off-by: Prashant Malani pmalani@chromium.org Reviewed-by: Heikki Krogerus heikki.krogerus@linux.intel.com Reviewed-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Reviewed-by: Nícolas F. R. A. Prado nfraprado@collabora.com Tested-by: Nícolas F. R. A. Prado nfraprado@collabora.com ---
Changes since v2: - Included Reviewed-by and Tested-by tags from v2.
Changes since v1: - No changes.
drivers/usb/typec/mux.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c index fd55c2c516a5..464330776cd6 100644 --- a/drivers/usb/typec/mux.c +++ b/drivers/usb/typec/mux.c @@ -281,9 +281,13 @@ static void *typec_mux_match(struct fwnode_handle *fwnode, const char *id, if (match) goto find_mux;
- /* Accessory Mode muxes */ if (!desc) { - match = fwnode_property_present(fwnode, "accessory"); + /* + * Accessory Mode muxes & muxes which explicitly specify + * the required identifier can avoid SVID matching. + */ + match = fwnode_property_present(fwnode, "accessory") || + fwnode_property_present(fwnode, id); if (match) goto find_mux; return NULL;
There are some drivers that can use the Type C mux API, but don't have to. Introduce CONFIG guards for the mux functions so that drivers can include the header file and not run into compilation errors on systems which don't have CONFIG_TYPEC enabled. When CONFIG_TYPEC is not enabled, the Type C mux functions will be stub versions of the original calls.
Reported-by: kernel test robot lkp@intel.com Reviewed-by: Nícolas F. R. A. Prado nfraprado@collabora.com Tested-by: Nícolas F. R. A. Prado nfraprado@collabora.com Signed-off-by: Prashant Malani pmalani@chromium.org ---
Changes since v2: - Fix up return types for some of the stubs. Remove 1 unnecessary stub in the else condition. - Remove unnecessary IS_MODULE config guard. - Added Reviewed-by and Tested-by tags.
Changes since v1: - Added static inline to stub functions. - Updated function signature of stub functions from "struct typec_mux" to "struct typec_mux_dev" in accordance with updates from commit 713fd49b430c ("usb: typec: mux: Introduce indirection")
include/linux/usb/typec_mux.h | 44 ++++++++++++++++++++++++++++++----- 1 file changed, 38 insertions(+), 6 deletions(-)
diff --git a/include/linux/usb/typec_mux.h b/include/linux/usb/typec_mux.h index ee57781dcf28..9292f0e07846 100644 --- a/include/linux/usb/typec_mux.h +++ b/include/linux/usb/typec_mux.h @@ -58,17 +58,13 @@ struct typec_mux_desc { void *drvdata; };
+#if IS_ENABLED(CONFIG_TYPEC) + struct typec_mux *fwnode_typec_mux_get(struct fwnode_handle *fwnode, const struct typec_altmode_desc *desc); void typec_mux_put(struct typec_mux *mux); int typec_mux_set(struct typec_mux *mux, struct typec_mux_state *state);
-static inline struct typec_mux * -typec_mux_get(struct device *dev, const struct typec_altmode_desc *desc) -{ - return fwnode_typec_mux_get(dev_fwnode(dev), desc); -} - struct typec_mux_dev * typec_mux_register(struct device *parent, const struct typec_mux_desc *desc); void typec_mux_unregister(struct typec_mux_dev *mux); @@ -76,4 +72,40 @@ void typec_mux_unregister(struct typec_mux_dev *mux); void typec_mux_set_drvdata(struct typec_mux_dev *mux, void *data); void *typec_mux_get_drvdata(struct typec_mux_dev *mux);
+#else + +static inline struct typec_mux *fwnode_typec_mux_get(struct fwnode_handle *fwnode, + const struct typec_altmode_desc *desc) +{ + return NULL; +} + +static inline void typec_mux_put(struct typec_mux *mux) {} + +static inline int typec_mux_set(struct typec_mux *mux, struct typec_mux_state *state) +{ + return 0; +} + +static inline struct typec_mux_dev * +typec_mux_register(struct device *parent, const struct typec_mux_desc *desc) +{ + return ERR_PTR(-EOPNOTSUPP); +} +static inline void typec_mux_unregister(struct typec_mux_dev *mux) {} + +static inline void typec_mux_set_drvdata(struct typec_mux_dev *mux, void *data) {} +static inline void *typec_mux_get_drvdata(struct typec_mux_dev *mux) +{ + return ERR_PTR(-EOPNOTSUPP); +} + +#endif /* CONFIG_TYPEC */ + +static inline struct typec_mux * +typec_mux_get(struct device *dev, const struct typec_altmode_desc *desc) +{ + return fwnode_typec_mux_get(dev_fwnode(dev), desc); +} + #endif /* __USB_TYPEC_MUX */
Introduce a binding which represents a component that can control the routing of USB Type-C data lines as well as address data line orientation (based on CC lines' orientation).
Reviewed-by: Nícolas F. R. A. Prado nfraprado@collabora.com Tested-by: Nícolas F. R. A. Prado nfraprado@collabora.com Signed-off-by: Prashant Malani pmalani@chromium.org ---
Changes since v2: - Added Reviewed-by and Tested-by tags.
Changes since v1: - Removed "items" from compatible. - Fixed indentation in example.
.../devicetree/bindings/usb/typec-switch.yaml | 74 +++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/typec-switch.yaml
diff --git a/Documentation/devicetree/bindings/usb/typec-switch.yaml b/Documentation/devicetree/bindings/usb/typec-switch.yaml new file mode 100644 index 000000000000..78b0190c8543 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/typec-switch.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/typec-switch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: USB Type-C Switch + +maintainers: + - Prashant Malani pmalani@chromium.org + +description: + A USB Type-C switch represents a component which routes USB Type-C data + lines to various protocol host controllers (e.g USB, VESA DisplayPort, + Thunderbolt etc.) depending on which mode the Type-C port, port partner + and cable are operating in. It can also modify lane routing based on + the orientation of a connected Type-C peripheral. + +properties: + compatible: + const: typec-switch + + mode-switch: + type: boolean + description: Specify that this switch can handle alternate mode switching. + + orientation-switch: + type: boolean + description: Specify that this switch can handle orientation switching. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: OF graph binding modelling data lines to the Type-C switch. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Link between the switch and a Type-C connector. + + required: + - port@0 + +required: + - compatible + - ports + +anyOf: + - required: + - mode-switch + - required: + - orientation-switch + +additionalProperties: true + +examples: + - | + drm-bridge { + usb-switch { + compatible = "typec-switch"; + mode-switch; + orientation-switch; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + anx_ep: endpoint { + remote-endpoint = <&typec_controller>; + }; + }; + }; + }; + };
Analogix 7625 can be used in systems to switch USB Type-C DisplayPort alternate mode lane traffic between 2 Type-C ports.
Update the binding to accommodate this usage by introducing a switch property.
Reviewed-by: Nícolas F. R. A. Prado nfraprado@collabora.com Tested-by: Nícolas F. R. A. Prado nfraprado@collabora.com Signed-off-by: Prashant Malani pmalani@chromium.org ---
Changes since v2: - Added Reviewed-by and Tested-by tags.
Changes since v1: - Introduced patternProperties for "switch" children (suggested by Krzysztof Kozlowski). - Added unevaluatedProperties descriptor (suggested by Krzysztof Kozlowski). - Added "address-cells" and "size-cells" properties to "switches".
.../display/bridge/analogix,anx7625.yaml | 63 +++++++++++++++++++ 1 file changed, 63 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml index 35a48515836e..cb4a23391244 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -105,6 +105,33 @@ properties: - port@0 - port@1
+ switches: + type: object + description: Set of switches controlling DisplayPort traffic on + outgoing RX/TX lanes to Type C ports. + unevaluatedProperties: false + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + 'switch@[01]': + $ref: /schemas/usb/typec-switch.yaml# + + properties: + reg: + maxItems: 1 + + required: + - reg + + required: + - switch@0 + required: - compatible - reg @@ -167,5 +194,41 @@ examples: }; }; }; + switches { + #address-cells = <1>; + #size-cells = <0>; + switch@0 { + compatible = "typec-switch"; + reg = <0>; + mode-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + anx_typec0: endpoint { + remote-endpoint = <&typec_port0>; + }; + }; + }; + }; + switch@1 { + compatible = "typec-switch"; + reg = <1>; + mode-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + anx_typec1: endpoint { + remote-endpoint = <&typec_port1>; + }; + }; + }; + }; + }; }; };
On 14/06/2022 12:34, Prashant Malani wrote:
Analogix 7625 can be used in systems to switch USB Type-C DisplayPort alternate mode lane traffic between 2 Type-C ports.
Update the binding to accommodate this usage by introducing a switch property.
Reviewed-by: Nícolas F. R. A. Prado nfraprado@collabora.com Tested-by: Nícolas F. R. A. Prado nfraprado@collabora.com Signed-off-by: Prashant Malani pmalani@chromium.org
Changes since v2:
- Added Reviewed-by and Tested-by tags.
Changes since v1:
- Introduced patternProperties for "switch" children (suggested by Krzysztof Kozlowski).
- Added unevaluatedProperties descriptor (suggested by Krzysztof Kozlowski).
- Added "address-cells" and "size-cells" properties to "switches".
.../display/bridge/analogix,anx7625.yaml | 63 +++++++++++++++++++ 1 file changed, 63 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml index 35a48515836e..cb4a23391244 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -105,6 +105,33 @@ properties: - port@0 - port@1
- switches:
- type: object
- description: Set of switches controlling DisplayPort traffic on
outgoing RX/TX lanes to Type C ports.- unevaluatedProperties: false
This should be additionalProperties:false.
- properties:
"#address-cells":const: 1"#size-cells":const: 0- patternProperties:
'switch@[01]':
You also need ^ and $. Please use the same quotes as in other places (here is ' but few lines above ")
$ref: /schemas/usb/typec-switch.yaml#
You need unevaluatedProperties:false on this level.
properties:reg:maxItems: 1required:- reg- required:
- switch@0
Best regards, Krzysztof
Parse the "switches" node, if available, and count and store the number of Type-C switches within it. Since we currently don't do anything with this info, no functional changes are expected from this change.
This patch sets a foundation for the actual registering of Type-C switches with the Type-C connector class framework.
Reviewed-by: Nícolas F. R. A. Prado nfraprado@collabora.com Tested-by: Nícolas F. R. A. Prado nfraprado@collabora.com Signed-off-by: Prashant Malani pmalani@chromium.org ---
Changes since v2: - Move ret variable to Patch v3 6/7.. - Make error print a dev_dbg, since it is noisy. - Added Reviewed-by and Tested-by tags.
Changes since v1: - No changes.
drivers/gpu/drm/bridge/analogix/anx7625.c | 18 ++++++++++++++++++ drivers/gpu/drm/bridge/analogix/anx7625.h | 1 + 2 files changed, 19 insertions(+)
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c index 53a5da6c49dd..e3d4c2738b8c 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.c +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c @@ -2581,6 +2581,20 @@ static void anx7625_runtime_disable(void *data) pm_runtime_disable(data); }
+static int anx7625_register_typec_switches(struct device *device, struct anx7625_data *ctx) +{ + struct device_node *of = of_get_child_by_name(device->of_node, "switches"); + + if (!of) + return -ENODEV; + + ctx->num_typec_switches = of_get_child_count(of); + if (ctx->num_typec_switches <= 0) + return -ENODEV; + + return 0; +} + static int anx7625_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -2686,6 +2700,10 @@ static int anx7625_i2c_probe(struct i2c_client *client, if (platform->pdata.intp_irq) queue_work(platform->workqueue, &platform->work);
+ ret = anx7625_register_typec_switches(dev, platform); + if (ret) + dev_dbg(dev, "Didn't register Type C switches, err: %d\n", ret); + platform->bridge.funcs = &anx7625_bridge_funcs; platform->bridge.of_node = client->dev.of_node; if (!anx7625_of_panel_on_aux_bus(&client->dev)) diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h index e257a84db962..d5cbca708842 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.h +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h @@ -473,6 +473,7 @@ struct anx7625_data { struct drm_connector *connector; struct mipi_dsi_device *dsi; struct drm_dp_aux aux; + int num_typec_switches; };
#endif /* __ANX7625_H__ */
When the DT node has "switches" available, register a Type-C mode-switch for each listed "switch". This allows the driver to receive state information about what operating mode a Type-C port and its connected peripherals are in, as well as status information (like VDOs) related to that state.
The callback function is currently a stub, but subsequent patches will implement the required functionality.
Reviewed-by: Nícolas F. R. A. Prado nfraprado@collabora.com Tested-by: Nícolas F. R. A. Prado nfraprado@collabora.com Signed-off-by: Prashant Malani pmalani@chromium.org ---
Changes since v2: - Updated dev_info() to dev_warn() print, but added a check to ensure it only triggers on non -ENODEV errors. - Made conflict resolutions resulting from changes introduced in Patch v3 5/7 (add ret variable here instead of in Patch v3 5/7). - Added Reviewed-by and Tested-by tags.
Changes since v1: - No changes.
drivers/gpu/drm/bridge/analogix/anx7625.c | 82 +++++++++++++++++++++-- drivers/gpu/drm/bridge/analogix/anx7625.h | 6 ++ 2 files changed, 84 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c index e3d4c2738b8c..bd21f159b973 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.c +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c @@ -15,6 +15,7 @@ #include <linux/regulator/consumer.h> #include <linux/slab.h> #include <linux/types.h> +#include <linux/usb/typec_mux.h> #include <linux/workqueue.h>
#include <linux/of_gpio.h> @@ -2581,10 +2582,61 @@ static void anx7625_runtime_disable(void *data) pm_runtime_disable(data); }
+static int anx7625_typec_mux_set(struct typec_mux_dev *mux, + struct typec_mux_state *state) +{ + return 0; +} + +static int anx7625_register_mode_switch(struct device *dev, struct device_node *node, + struct anx7625_data *ctx) +{ + struct anx7625_port_data *port_data; + struct typec_mux_desc mux_desc = {}; + char name[32]; + u32 port_num; + int ret; + + ret = of_property_read_u32(node, "reg", &port_num); + if (ret) + return ret; + + if (port_num >= ctx->num_typec_switches) { + dev_err(dev, "Invalid port number specified: %d\n", port_num); + return -EINVAL; + } + + port_data = &ctx->typec_ports[port_num]; + port_data->ctx = ctx; + mux_desc.fwnode = &node->fwnode; + mux_desc.drvdata = port_data; + snprintf(name, sizeof(name), "%s-%u", node->name, port_num); + mux_desc.name = name; + mux_desc.set = anx7625_typec_mux_set; + + port_data->typec_mux = typec_mux_register(dev, &mux_desc); + if (IS_ERR(port_data->typec_mux)) { + ret = PTR_ERR(port_data->typec_mux); + dev_err(dev, "Mode switch register for port %d failed: %d", port_num, ret); + } + + return ret; +} + +static void anx7625_unregister_typec_switches(struct anx7625_data *ctx) +{ + int i; + + for (i = 0; i < ctx->num_typec_switches; i++) + typec_mux_unregister(ctx->typec_ports[i].typec_mux); +} + static int anx7625_register_typec_switches(struct device *device, struct anx7625_data *ctx) { - struct device_node *of = of_get_child_by_name(device->of_node, "switches"); + struct device_node *of, *sw; + int ret = 0;
+ of = of_get_child_by_name(device->of_node, "switches"); if (!of) return -ENODEV;
@@ -2592,7 +2644,27 @@ static int anx7625_register_typec_switches(struct device *device, struct anx7625 if (ctx->num_typec_switches <= 0) return -ENODEV;
- return 0; + ctx->typec_ports = devm_kzalloc(device, + ctx->num_typec_switches * sizeof(struct anx7625_port_data), + GFP_KERNEL); + if (!ctx->typec_ports) + return -ENOMEM; + + /* Register switches for each connector. */ + for_each_available_child_of_node(of, sw) { + if (!of_property_read_bool(sw, "mode-switch")) + continue; + ret = anx7625_register_mode_switch(device, sw, ctx); + if (ret) { + dev_err(device, "Failed to register mode switch: %d\n", ret); + break; + } + } + + if (ret) + anx7625_unregister_typec_switches(ctx); + + return ret; }
static int anx7625_i2c_probe(struct i2c_client *client, @@ -2701,8 +2773,8 @@ static int anx7625_i2c_probe(struct i2c_client *client, queue_work(platform->workqueue, &platform->work);
ret = anx7625_register_typec_switches(dev, platform); - if (ret) - dev_dbg(dev, "Didn't register Type C switches, err: %d\n", ret); + if (ret && ret != -ENODEV) + dev_warn(dev, "Didn't register Type C switches, err: %d\n", ret);
platform->bridge.funcs = &anx7625_bridge_funcs; platform->bridge.of_node = client->dev.of_node; @@ -2757,6 +2829,8 @@ static int anx7625_i2c_remove(struct i2c_client *client)
drm_bridge_remove(&platform->bridge);
+ anx7625_unregister_typec_switches(platform); + if (platform->pdata.intp_irq) destroy_workqueue(platform->workqueue);
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h index d5cbca708842..76cfc64f7574 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.h +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h @@ -443,6 +443,11 @@ struct anx7625_i2c_client { struct i2c_client *tcpc_client; };
+struct anx7625_port_data { + struct typec_mux_dev *typec_mux; + struct anx7625_data *ctx; +}; + struct anx7625_data { struct anx7625_platform_data pdata; struct platform_device *audio_pdev; @@ -474,6 +479,7 @@ struct anx7625_data { struct mipi_dsi_device *dsi; struct drm_dp_aux aux; int num_typec_switches; + struct anx7625_port_data *typec_ports; };
#endif /* __ANX7625_H__ */
From: Pin-Yen Lin treapking@chromium.org
Add the callback function when the driver receives state changes of the Type-C port. The callback function configures the crosspoint switch of the anx7625 bridge chip, which can change the output pins of the signals according to the port state.
Reviewed-by: Nícolas F. R. A. Prado nfraprado@collabora.com Tested-by: Nícolas F. R. A. Prado nfraprado@collabora.com Signed-off-by: Pin-Yen Lin treapking@chromium.org Signed-off-by: Prashant Malani pmalani@chromium.org ---
Changes since v2: - Moved num_typec_switches check to beginning of function - Made dp_connected assignments fit on one line (and removed unnecessary parentheses) - Added Reviewed-by and Tested-by tags.
Changes since v1: - No changes.
drivers/gpu/drm/bridge/analogix/anx7625.c | 56 +++++++++++++++++++++++ drivers/gpu/drm/bridge/analogix/anx7625.h | 13 ++++++ 2 files changed, 69 insertions(+)
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c index bd21f159b973..5992fc8beeeb 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.c +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c @@ -15,6 +15,7 @@ #include <linux/regulator/consumer.h> #include <linux/slab.h> #include <linux/types.h> +#include <linux/usb/typec_dp.h> #include <linux/usb/typec_mux.h> #include <linux/workqueue.h>
@@ -2582,9 +2583,64 @@ static void anx7625_runtime_disable(void *data) pm_runtime_disable(data); }
+static void anx7625_set_crosspoint_switch(struct anx7625_data *ctx, + enum typec_orientation orientation) +{ + if (orientation == TYPEC_ORIENTATION_NORMAL) { + anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_0, + SW_SEL1_SSRX_RX1 | SW_SEL1_DPTX0_RX2); + anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_1, + SW_SEL2_SSTX_TX1 | SW_SEL2_DPTX1_TX2); + } else if (orientation == TYPEC_ORIENTATION_REVERSE) { + anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_0, + SW_SEL1_SSRX_RX2 | SW_SEL1_DPTX0_RX1); + anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_1, + SW_SEL2_SSTX_TX2 | SW_SEL2_DPTX1_TX1); + } +} + +static void anx7625_typec_two_ports_update(struct anx7625_data *ctx) +{ + if (ctx->typec_ports[0].dp_connected && ctx->typec_ports[1].dp_connected) + /* Both ports available, do nothing to retain the current one. */ + return; + else if (ctx->typec_ports[0].dp_connected) + anx7625_set_crosspoint_switch(ctx, TYPEC_ORIENTATION_NORMAL); + else if (ctx->typec_ports[1].dp_connected) + anx7625_set_crosspoint_switch(ctx, TYPEC_ORIENTATION_REVERSE); +} + static int anx7625_typec_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state) { + struct anx7625_port_data *data = typec_mux_get_drvdata(mux); + struct anx7625_data *ctx = data->ctx; + struct device *dev = &ctx->client->dev; + bool new_dp_connected, old_dp_connected; + + if (ctx->num_typec_switches == 1) + return 0; + + old_dp_connected = ctx->typec_ports[0].dp_connected || ctx->typec_ports[1].dp_connected; + + dev_dbg(dev, "mux_set dp_connected: c0=%d, c1=%d\n", + ctx->typec_ports[0].dp_connected, ctx->typec_ports[1].dp_connected); + + data->dp_connected = (state->alt && state->alt->svid == USB_TYPEC_DP_SID && + state->alt->mode == USB_TYPEC_DP_MODE); + + new_dp_connected = ctx->typec_ports[0].dp_connected || ctx->typec_ports[1].dp_connected; + + /* dp on, power on first */ + if (!old_dp_connected && new_dp_connected) + pm_runtime_get_sync(dev); + + anx7625_typec_two_ports_update(ctx); + + /* dp off, power off last */ + if (old_dp_connected && !new_dp_connected) + pm_runtime_put_sync(dev); + return 0; }
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h index 76cfc64f7574..7d6c6fdf9a3a 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.h +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h @@ -55,6 +55,18 @@ #define HPD_STATUS_CHANGE 0x80 #define HPD_STATUS 0x80
+#define TCPC_SWITCH_0 0xB4 +#define SW_SEL1_DPTX0_RX2 BIT(0) +#define SW_SEL1_DPTX0_RX1 BIT(1) +#define SW_SEL1_SSRX_RX2 BIT(4) +#define SW_SEL1_SSRX_RX1 BIT(5) + +#define TCPC_SWITCH_1 0xB5 +#define SW_SEL2_DPTX1_TX2 BIT(0) +#define SW_SEL2_DPTX1_TX1 BIT(1) +#define SW_SEL2_SSTX_TX2 BIT(4) +#define SW_SEL2_SSTX_TX1 BIT(5) + /******** END of I2C Address 0x58 ********/
/***************************************************************/ @@ -444,6 +456,7 @@ struct anx7625_i2c_client { };
struct anx7625_port_data { + bool dp_connected; struct typec_mux_dev *typec_mux; struct anx7625_data *ctx; };
dri-devel@lists.freedesktop.org
-
Krzysztof Kozlowski -
Prashant Malani