Request to add card reader to 10-usb-card-readers.fdi
Joeri Capens
joeri at capens.net
Tue Jan 6 13:26:11 PST 2009
Hello everybody
My 9-in-1 Card Reader was not recognized by hal. I would like the
following to be added to the 10-usb-card-readers.fdi file:
<!-- Yet another common theme -->
<match key="storage.model" contains="CardReader CF">
<merge key="storage.drive_type" type="string">compact_flash</merge>
</match>
<match key="storage.model" contains="CardReader MS">
<merge key="storage.drive_type" type="string">memory_stick</merge>
</match>
<match key="storage.model" contains="CardReader SM">
<merge key="storage.drive_type" type="string">smart_media</merge>
</match>
<match key="storage.model" contains="CardReader SD">
<merge key="storage.drive_type" type="string">sd_mmc</merge>
</match>
This makes it work for me.
dmesg info:
[ 8.525481] scsi 6:0:0:0: Direct-Access USB2.0 CardReader CF RW
0.0> PQ: 0 ANSI: 0
[ 8.527131] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 8.527851] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 8.529025] scsi 6:0:0:1: Direct-Access USB2.0 CardReader SD RW
0.0> PQ: 0 ANSI: 0
[ 8.530936] sd 6:0:0:1: [sde] Attached SCSI removable disk
[ 8.530998] sd 6:0:0:1: Attached scsi generic sg5 type 0
[ 8.532863] scsi 6:0:0:2: Direct-Access USB2.0 CardReader SM RW
0.0> PQ: 0 ANSI: 0
[ 8.535812] sd 6:0:0:2: [sdf] Attached SCSI removable disk
[ 8.535871] sd 6:0:0:2: Attached scsi generic sg6 type 0
[ 8.536854] scsi 6:0:0:3: Direct-Access USB2.0 CardReader MS RW
0.0> PQ: 0 ANSI: 0
[ 8.538310] sd 6:0:0:3: [sdg] Attached SCSI removable disk
[ 8.538379] sd 6:0:0:3: Attached scsi generic sg7 type 0
[ 8.538531] usb-storage: device scan complete
usb info:
07cc:0350 Carry Computer Eng., Co., Ltd 9-in-1 Card Reader
lsusb info:
Bus 001 Device 005: ID 07cc:0350 Carry Computer Eng., Co., Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x07cc Carry Computer Eng., Co., Ltd
idProduct 0x0350
bcdDevice 0.05
iManufacturer 1 Ltd
iProduct 2 Winter Ver1.3
iSerial 3 394609411836
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 4 1.06.30.0704
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
thank you
Joeri Capens
More information about the hal
mailing list