[SCIM] Newbie question: scim::FrontEnd: X11 -- failed to connect to the panel daemon!

[Amish Rughoonundon (RIT Student)]

Hi,
I tried installing scim again after installing gtk+2 but I got this mistake this time around:
...
g++ -g -O2 -o .libs/scim-panel-gtk -Wl,--export-dynamic scim_panel_gtk-scim_panel_gtk.o  -lm -pthread /usr/lib/libgthread-2.0.so -lpthread ../../src/.libs/libscim-1.0.so -L/usr/i486-slackware-linux/bin -L/usr/i486-slackware-linux/lib ../../utils/.libs/libscim-gtkutils-1.0.so /usr/lib/libgtk-x11-2.0.so /usr/lib/libgdk-x11-2.0.so /usr/lib/libatk-1.0.so /usr/lib/libpangoxft-1.0.so /usr/lib/libpangox-1.0.so /usr/lib/libpango-1.0.so /usr/lib/libgdk_pixbuf-2.0.so /usr/lib/libgobject-2.0.so /usr/lib/libgmodule-2.0.so /usr/lib/libglib-2.0.so /home/liaj/amish/Downloads/scim-1.0.1/src/.libs/libscim-1.0.so -ldl /usr/lib/./libstdc++.so -Wl,--rpath -Wl,/usr/lib/.
/usr/lib/libgtk-x11-2.0.so: undefined reference to `pango_find_base_dir'
collect2: ld returned 1 exit status
make[3]: *** [scim-panel-gtk] Error 1
...
Anybody have any idea what this error is about. Thanks a lot for you help,
Amish
 

	-----Original Message----- 
	From: Zhe Su [mailto:james.su at gmail.com] 
	Sent: Fri 12/3/2004 9:04 PM 
	To: Amish Rughoonundon (RIT Student) 
	Cc: 
	Subject: Re: [SCIM] Newbie question: scim::FrontEnd: X11 -- failed to connect to the panel daemon!
	
	

	gtk+2-2.2.4-i486-1 is not the devel package. The devel package should
	be gtk+2-devel-2.2.4-i486-1 or something else.
	
	
	On Fri, 3 Dec 2004 18:12:28 -0500, Amish Rughoonundon (RIT Student)
	<axr0284 at rit.edu> wrote:
	> 
	> Hi
	>  I used pkg-config --modversion gtk+-2.0 to check if gtk+2 was installed but
	> I got a negative response. I then checked the package manager and it showed
	> that gtk+2-2.2.4-i486-1(This is the devel package if I am not mistaken. I
	> forgot to say that I am using the Slackware distribution so it may not
	> matter which package I use) as well as gtk+-1.2.10-i386-3 was installed. I
	> was wondering if installing a fresh version of gtk+2.4 would solve the
	> problem or not. Thanks for you time
	>
	> 
	> Amish
	> 
	> -----Original Message-----
	> From: Zhe Su [mailto:james.su at gmail.com]
	> Sent: Fri 12/3/2004 10:18 AM
	> To: Amish Rughoonundon (RIT Student)
	> Cc: scim at freedesktop.org
	> Subject: Re: [SCIM] Newbie question: scim::FrontEnd: X11 -- failed to
	> connect to the panel daemon!
	>
	> 
	>
	> Yes.
	>
	>
	> On Fri, 3 Dec 2004 10:16:21 -0500, Amish Rughoonundon (RIT Student)
	> <axr0284 at rit.edu> wrote:
	> >
	> > Hi
	> > You're right. It is not installed. So I have to install this package and
	> > then reinstall scim. Is that right?? Thanks
	> >
	> >
	> > Amish
	> >
	> > -----Original Message-----
	> > From: James Su [mailto:suzhe at tsinghua.org.cn]
	> > Sent: Fri 12/3/2004 10:02 AM
	> > To: Amish Rughoonundon (RIT Student)
	> > Cc: scim at freedesktop.org
	> > Subject: Re: [SCIM] Newbie question: scim::FrontEnd: X11 -- failed to
	> > connect to the panel daemon!
	> >
	> >
	> >
	> > Hi,
	> >   I think you did not install gtk2-devel package before compiling scim,
	> > is it right?
	> >
	> > Regards
	> > James Su
	> >
	> > Amish Rughoonundon (RIT Student) wrote:
	> >
	> > > It seems this program did not get installed when i installed scim. I
	> > > found it in the extras folder of the scim installer. Is there anything
	> > > special that needs to be done to install this. Thanks
	> > > Amish
	> > >
	> > >     -----Original Message-----
	> > >     *From:* Zhe Su [mailto:james.su at gmail.com]
	> > >     *Sent:* Wed 12/1/2004 9:42 PM
	> > >     *To:* Amish Rughoonundon (RIT Student)
	> > >     *Cc:* scim at freedesktop.org
	> > >     *Subject:* Re: [SCIM] Newbie question: scim::FrontEnd: X11 --
	> > >     failed to connect to the panel daemon!
	> > >
	> > >     Hi,
	> > >       Please try to run /usr/lib/scim-1.0/scim-panel-gtk directly to
	> > >     see if it's ok.
	> > >
	> > >     Regards
	> > >     James Su
	> > >
	> > >     On Wed, 1 Dec 2004 14:06:18 -0500, Amish Rughoonundon (RIT Student)
	> > >     <axr0284 at rit.edu> wrote:
	> > >     >
	> > >     > Hi,
	> > >     >  I am getting this error when i try to run scim:
	> > >     > scim::FrontEnd: X11 -- failed to connect to the panel daemon!
	> > >     > I have seen the answer to this question online but it was in
	> > >     japanese and
	> > >     > the translation that google gives is really bad. I used
	> > >     > scim -f x11 -d
	> > >     > and it seemed to fix the problem but I would like to understand
	> > >     what is
	> > >     > causing this problem. If somebody could explain it, I would really
	> > >     > appreciate it.
	> > >     > Amish
	> > >     > _______________________________________________
	> > >     > scim mailing list
	> > >     > scim at freedesktop.org
	> > >     > http://freedesktop.org/mailman/listinfo/scim
	> > >     >
	> > >     >
	> > >     >
	> > >
	> > >------------------------------------------------------------------------
	> > >
	> > >_______________________________________________
	> > >scim mailing list
	> > >scim at lists.freedesktop.org
	> > >http://lists.freedesktop.org/mailman/listinfo/scim
	> > >
	> > >
	> >
	> >
	> > _______________________________________________
	> > scim mailing list
	> > scim at lists.freedesktop.org
	> > http://lists.freedesktop.org/mailman/listinfo/scim
	> >
	> >
	> >
	> 
	> _______________________________________________
	> scim mailing list
	> scim at lists.freedesktop.org
	> http://lists.freedesktop.org/mailman/listinfo/scim
	>
	>
	>
	

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freedesktop.org/pipermail/scim/attachments/20041206/4240ccee/attachment-0001.html