[Uim] does uim-fep works for debian 7

[NOKUBI Takatsugu]

In my environment, locale was missing, so I installed
locale-data package and tried to generate Japanese locale.

# locale-gen
Generating locales (this might take a while)...
  ja_JP.EUC-JP...Segmentation fault
 done
  ja_JP.UTF-8...Segmentation fault
 done
Generation complete.

It seems not work appropriately, but uim-fep works
on the envrionment.

$ uim-fep -u anthy
$
anthy[An- Ｒ]

Can you check /etc/locale.gen and try to make locale
data?

On Thu, 3 Apr 2014 23:00:17 +0800
Zhang Cong <congzhang at mathphoenix.com> wrote:

> Hi NOKUBI,
> 
>    The problem I face is even I use some method, it always like direct,
> like( it's for normal debian not hurd):
> 
> congzhang at gantry:~$ uim-fep -u py
> congzhang at gantry:~$ nihao
> py[IM-]
> 
> My machine:
> congzhang at gantry:~$ lsb_release  -a
> No LSB modules are available.
> Distributor ID: Debian
> Description:    Debian GNU/Linux 7.4 (wheezy)
> Release:        7.4
> Codename:       wheezy
> congzhang at gantry:~$ uname -a
> Linux gantry 3.2.0-4-amd64 #1 SMP Debian 3.2.54-2 x86_64 GNU/Linux
> 
> 
>   maybe I need config my xterm?
> 
>   Thanks
> 
>   Cong Zhang
> 
> 
> On Thu, Apr 3, 2014 at 4:51 PM, NOKUBI Takatsugu <knok at daionet.gr.jp> wrote:
> 
> > At Mon, 31 Mar 2014 20:15:14 +0800,
> > Zhang Cong wrote:
> > > As Debian GNU/Hurd may have some other problem not related to uim, I
> > don't
> > > advise you to try on Hurd directly.
> > > Maybe Debian 7 was a good choice.
> > > If it is work for wheezy at least, I can do other part to make it it
> > work for
> > > hurd.
> >
> > Finally I can work Hurd/wheezy and uim-fep.
> >
> > At first, uim-fep itself seems to work on direct mode.
> > ~# uim-fep
> >
> > The Hurd is not Linux. Make sure to read
> > http://www.debian.org/ports/hurd/hurd-install
> > to check out the few things you _need_ to know.
> >
> > To read a short intro on some nice features of the Hurd, just have a look
> > at
> > ./translator_primer, for example via 'nano translator_primer'
> >
> > root at debian:~#
> > direct[- -]
> >
> > However, uim-fep with anthy doesn't seem to work propery.
> > ~# uim-fep -u anthy
> >
> > The Hurd is not Linux. Make sure to read
> > http://www.debian.org/ports/hurd/hurd-install
> > to check out the few things you _need_ to know.
> >
> > To read a short intro on some nice features of the Hurd, just have a look
> > at
> > ./translator_primer, for example via 'nano translator_primer'
> >
> > root at debian:~#
> > anthy[]
> >
> > The following is the correct behavor:
> >
> > $ uim-fep -u anthy
> > $
> > anthy[An- Ｒ]
> >
> > uim-fep uses unix domain socket under ~/.uim.d , and it seems to
> > create, but not work.  It seems Debian GNU/Hurd don't have lsof, so I
> > can't find the sockes were used correctry...
> >
> > # ls -lR
> > .:
> > total 8
> > drwx------ 2 root root 4096 Apr  3 04:45 fep
> > drwx------ 2 root root 4096 Apr  3 04:23 socket
> >
> > ./fep:
> > total 4
> > -rw-r--r-- 1 root root 2 Apr  3 04:45 getmode-995
> > prw------- 1 root root 0 Apr  3 04:45 setmode-995
> >
> > ./socket:
> > total 0
> > srw-r--r-- 1 root root 0 Apr  3 04:23 uim-helper
> >


-- 
NOKUBI Takatsugu <knok at daionet.gr.jp>