Ati Radeon Mobility 9000 2 port from Colorgraphics question

Kaczmarek, Thaddeus tkaczmar at Crownfin.com
Tue Sep 14 04:38:11 PDT 2004


On Mon, 2004-09-13 at 16:21, Alex Deucher wrote:
> On Mon, 13 Sep 2004 16:20:38 -0400, Alex Deucher <alexdeucher at gmail.com>
wrote:
> > On Mon, 13 Sep 2004 16:09:57 -0400, Kaczmarek, Thaddeus
> > <tkaczmar at crownfin.com> wrote:
> > > On Mon, 2004-09-13 at 15:50, Alex Deucher wrote:
> > > > On Mon, 13 Sep 2004 14:33:01 -0400, Kaczmarek, Thaddeus
> > > > <tkaczmar at crownfin.com> wrote:
> > > > > I was testing a Colorgraphics two port card based upon ATI Radeon
> > > > > Mobility 9000 M9. Its Bus id's show up as
> > > > >
> > > > > (2:2:0) unknown card (0x130b/0x2512) using a ATI Technologies Inc
Radeon
> > > > > R250 Lf [Radeon Mobility 9000 M9]
> > > > > (2:2:1) unknown card (0x130b/0x2513) using a ATI Technologies Inc
Radeon
> > > > > R250 Ln [Radeon Mobility 9000 M9] [Secondary]
> > > >
> > > > pay no attention to the secondary PCI id.  it's just a placeholder
for
> > > > the windows drivers.  when configuring multihead just use the
primary
> > > > id for both devices.
> > > >
> > > > Alex
> > >
> > > If I use
> > >
> > > Section "Device"
> > >         Identifier  "Videocard0"
> > >         BusID       "PCI:2:2:0"
> > >         Driver      "ati"
> > >         VendorName  "Radeon Mobility 9000"
> > >         BusID       "PCI:2:2:0"
> > >         Screen 0
> > > EndSection
> > >
> > > Section "Device"
> > >         Identifier  "Videocard1"
> > >         Driver      "ati"
> > >         VendorName  "Radeon Mobility 9000"
> > >         BusID       "PCI:2:2:0"
> > >         Screen 1
> > > EndSection
> > >
> > > I still only get the display duped in both monitors.
> > > I tried without
> > > Screen 0
> > > and
> > > Screen 1
> > > specified in device section as well, still no joy. Screen 0 and Screen
1 are
> > > always duplicates.
> > >
> > > Also saw a similar type thing when testing with a Matrox G550, could
only
> > > get duplicate
> > > screens, but it only showed one BusID.
> > >
> > > I am using the same basic configs outside of the device section for
> > > Videocards that works up to a four head setup.
> > > But those where using the older Colorgraphics cards based on cirrus.
> > >
> > > Anything else I may be doing wrong?
> > 
> > Anything odd in your log?  perhaps the heads are not detected
> > properly.  What sort of outputs does it have? vga? dvi? you may need
> > to force the outputs using the "monitorlayout" option if they are not
> > detected properly.
> > e.g., for two crts use:
> > Option "monitorlayout" "crt,crt"
> > for dvi plus crt:
> > Option "monitorlayout" "crt,crt"
> 
> sorry I meant:
> Option "monitorlayout" "tmds,crt"
> here
> 
> > 
> > See the radeon man page for more.
> > 
> > Alex
> > 
Arg,
Do I need to specify two separate video devices when using 
Option "MonitorLayout" "TMDS, TMDS" ?

Logically it would make sense that if I configure Videocard0 with the
MonitorLayout option that it is not needed. But then I think, well how
do I map the device to the screen.


I don't see any errors in log file yet the second screen won't come up.
To keep it simple for stupid I am just trying to get both display from
this two port colorgraphics cards working. 

Here is a snippet of my last setup. 

Section "ServerLayout"
        Identifier     "Default Layout"
        Screen 0  "Screen 0" 0 0
        Screen 1 "Screen 1" RightOf "Screen 0"
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
        Option "Xinerama" "off"
        Option "Clone" "on"
EndSection

Section "Device"
        Identifier  "Videocard0"
        Driver      "radeon"
        VendorName  "Radeon Mobility 9000"
        BusID       "PCI:2:2:0"
        Option "MonitorLayout" "TMDS, TMDS"
        Option "BusType" "PCI"
        Option "CloneMode" "1280x1024"
        Option "CloneHSync"  "30.0 - 80.0"
        Option "CloneVRefresh" "56.0 - 76.0"
EndSection
 
Section "Device"
        Identifier  "Videocard1"
        Driver      "radeon"
        VendorName  "Radeon Mobility 9000"
        BusID       "PCI:2:2:0"
EndSection


Section "Screen"
        Identifier "Screen 0"
        Device     "Videocard0"
        Monitor    "Monitor0"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
                Modes    "1280x1024" "1024x768" "800x600" "640x480"
        EndSubSection
EndSection
 
Section "Screen"
        Identifier "Screen 1"
        Device     "Videocard1"
        Monitor    "Monitor1"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
                Modes    "1280x1024" "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Will have to do a newbie how to when I am done with all this.


Thanks,
Ted





DISCLAIMER

This e-mail, and any attachments thereto, is intended only for use by the
addressee(s) named herein and may contain legally privileged and/or
confidential information. If you are not the intended recipient of this
e-mail, you are hereby notified that any dissemination, distribution or
copying of this e-mail, and any attachments thereto, is strictly prohibited.
If you have received this e-mail in error, please immediately notify me and
permanently delete the original and any copy of any e-mail and any printout
thereof.

E-mail transmission cannot be guaranteed to be secure or error-free. The
sender therefore does not accept liability for any errors or omissions in
the contents of this message which arise as a result of e-mail transmission.
REGARDING PRIVACY AND CONFIDENTIALITY
Crown Financial Group may, at its discretion, monitor and review the content
of all e-mail communications.




More information about the xorg mailing list