855GM not changing resolutions for games

[tuxrocks at cox.net]

> Right here:  
> (WW) I810(0): config file hsync range 45.7143-50.5263kHz not within  
>DDC  
> hsync ranges.  
> (II) I810(0): Monitor0: Using hsync range of 45.71-50.53 kHz  
> (II) I810(0): Monitor0: Using vrefresh value of 60.00 Hz  
> (II) I810(0): Increasing the scanline pitch to allow tiling mode (1280  
> -> 2048).  
> (--) I810(0): Virtual size is 1280x800 (pitch 2048)  
> (**) I810(0): *Built-in mode "1280x800"  
> (**) I810(0): *Built-in mode "1024x768"  
> (**) I810(0): Display dimensions: (330, 210) mm  
> (**) I810(0): DPI set to (98, 96)  
> So 800x600 and 640x480 (at 60hz) got tossed out because their  
>hsync  
> value is below 45kHz. Try specifying a different hsync range in the  
> config file (down to 30kHz), or you may get away without one at all if  
> the monitor provides this information via ddc.  
> (Though personally, in my experience monitors aren't likely to provide  
> anything useful or correct with EDID/DDC. I often just use  
> NoDDC/IgnoreEDID and provide the information manually, but maybe  
>it's  
> more useful with TFT's...)  
>  
> Roland  
  
Alright, now I am beginning to feel a little stupid.  I tried placing a  
HorizSync range in my config file, and it seems to be ignored, because  
the log still shows the "not within DDC range" error listed above.  I put it in  
the monitor section: "HorizSync 30 - 50".  Shouldn't it at least decline that  
range?  I also tried to specify "NoDDC"  "true" in my Device section.  
  
Am I doing it incorrectly?  I am including a link to my config file, and most  
recent log file.  
 Xorg.conf: http://staff.norman.k12.ok.us/~wsmith/xorg.conf 
Xorg.0.log (most recent): 
http://staff.norman.k12.ok.us/~wsmith/Xorg.0.log.recent 
 
Thanks again to all. 
 
Wayne