Radeon FireMV 2400 PCI

[Erwin Rol]

On Fri, 2006-01-27 at 04:21 +0100, Roland Scheidegger wrote:
> Erwin Rol wrote:
> > 
> > My question is are there any databooks, documentation etc. on the M9
> > chips available without a NDA? 
> Well those are just standard rv280 chips (in the pci versions of the 
> firemv cards, in contrast to the rv370 on the pci-e versions). At least 

Actually i think the M9 is a RV250 chip and not a RV280, at least that
is what lspci tells me.

> catalyst seems to treat them as such. What's the lspci output? I'm kinda 
> curious, since normally two entries are reported for one chip, but the 
> catalyst .inf file only has two entries in total, so I guess in this 
> case the secondary id actually is the 2nd chip.

-[0000:00]-+-00.0
           +-01.0-[0000:01]--
           +-04.0
           +-04.1
           +-04.2
           +-04.3
           +-04.4
           +-09.0
           +-0a.0
           +-0c.0-[0000:02]--+-01.0
           |                 +-01.1
           |                 +-05.0
           |                 \-05.1
           +-0d.0
           \-11.0


00:0c.0 PCI bridge: Hint Corp HB6 Universal PCI-PCI bridge (non-transparent mode) (rev 15) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32, Cache Line Size 08
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
        I/O behind bridge: 00007000-00007fff
        Memory behind bridge: b1000000-b2ffffff
        Prefetchable memory behind bridge: 00000000b4000000-00000000cfe00000
        Secondary status: 66Mhz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+
        Capabilities: [90] #06 [0000]
        Capabilities: [a0] Vital Product Data


02:01.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [FireGL 9000] (rev 02) (prog-if 00 [VGA])
        Subsystem: ATI Technologies Inc: Unknown device a003
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (2000ns min), Cache Line Size 08
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at c8000000 (32-bit, prefetchable) [size=64M]
        Region 1: I/O ports at 7800 [size=256]
        Region 2: Memory at b2800000 (32-bit, non-prefetchable) [size=64K]
        Expansion ROM at c7fe0000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:01.1 Display controller: ATI Technologies Inc Radeon R250 Ln [Radeon Mobility 9000 M9] [Secondary] (rev 02)
        Subsystem: ATI Technologies Inc: Unknown device a002
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (2000ns min), Cache Line Size 08
        Region 0: Memory at c0000000 (32-bit, prefetchable) [size=64M]
        Region 1: Memory at b2000000 (32-bit, non-prefetchable) [size=64K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:05.0 Display controller: ATI Technologies Inc Radeon R250 Lf [FireGL 9000] (rev 02)
        Subsystem: ATI Technologies Inc: Unknown device a003
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (2000ns min), Cache Line Size 08
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at bc000000 (32-bit, prefetchable) [size=64M]
        Region 1: I/O ports at 7400 [size=256]
        Region 2: Memory at b1800000 (32-bit, non-prefetchable) [size=64K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:05.1 Display controller: ATI Technologies Inc Radeon R250 Ln [Radeon Mobility 9000 M9] [Secondary] (rev 02)
        Subsystem: ATI Technologies Inc: Unknown device a002
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (2000ns min), Cache Line Size 08
        Region 0: Memory at b4000000 (32-bit, prefetchable) [size=64M]
        Region 1: Memory at b1000000 (32-bit, non-prefetchable) [size=64K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-