[PATCH] drm/i915: add fast boot support for Haswell

Furquan Shaikh furquan at google.com
Mon Aug 5 13:24:15 PDT 2013


We tested the submitted patch on several systems here and it seems to be
working fine. So, I'm not sure I understand your comment. Can you please
provide more details?

Thanks,
Furquan


On Mon, Aug 5, 2013 at 12:24 AM, Daniel Vetter <daniel at ffwll.ch> wrote:

> On Thu, Aug 01, 2013 at 02:12:22PM -0700, Furquan Shaikh wrote:
> > Enables getting correct mode clock when reading pipe config
> >
> > Signed-off-by: Furquan Shaikh <furquan at google.com>
> > ---
> >  drivers/gpu/drm/i915/intel_ddi.c     | 8 ++++++++
> >  drivers/gpu/drm/i915/intel_display.c | 9 ++++++++-
> >  2 files changed, 16 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_ddi.c
> b/drivers/gpu/drm/i915/intel_ddi.c
> > index 931b4bb..fa0af9b 100644
> > --- a/drivers/gpu/drm/i915/intel_ddi.c
> > +++ b/drivers/gpu/drm/i915/intel_ddi.c
> > @@ -1269,6 +1269,7 @@ static void intel_ddi_get_config(struct
> intel_encoder *encoder,
> >       struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
> >       struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> >       enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
> > +     int port = intel_ddi_get_encoder_port(encoder);
> >       u32 temp, flags = 0;
> >
> >       temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
> > @@ -1282,6 +1283,13 @@ static void intel_ddi_get_config(struct
> intel_encoder *encoder,
> >               flags |= DRM_MODE_FLAG_NVSYNC;
> >
> >       pipe_config->adjusted_mode.flags |= flags;
> > +
> > +     if (port == PORT_A) {
> > +             if ((I915_READ(DP_A) & DP_PLL_FREQ_MASK) ==
> DP_PLL_FREQ_160MHZ)
> > +                     pipe_config->port_clock = 162000;
> > +             else
> > +                     pipe_config->port_clock = 270000;
> > +     }
>
> I don't think this works correctly since for DP we have new clocks on
> haswell, see intel_ddi_pll_mode_set. Also I think it'd be good to go right
> ahead and implement clock readout support for all hsw clock sources, not
> just DP.
> -Daniel
>
> >  }
> >
> >  static void intel_ddi_destroy(struct drm_encoder *encoder)
> > diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> > index 3e66f05..681c99a 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -7176,6 +7176,8 @@ static void i9xx_crtc_clock_get(struct intel_crtc
> *crtc,
> >               pipe_config->pixel_multiplier;
> >  }
> >
> > +#define div_ceil(A, B) ((A)/(B) + ((A)%(B) ? 1 : 0))
> > +
> >  static void ironlake_crtc_clock_get(struct intel_crtc *crtc,
> >                                   struct intel_crtc_config *pipe_config)
> >  {
> > @@ -7218,7 +7220,11 @@ static void ironlake_crtc_clock_get(struct
> intel_crtc *crtc,
> >               return;
> >
> >       clock = ((u64)link_m * (u64)link_freq * (u64)repeat);
> > -     do_div(clock, link_n);
> > +     /* This is required because the value comes out to be in fraction
> > +        (eg. 70699.54). Need to round it up since values are compared in
> > +        drm_mode_equal
> > +     */
> > +     clock = div_ceil(clock, link_n);
> >
> >       pipe_config->adjusted_mode.clock = clock;
> >  }
> > @@ -9588,6 +9594,7 @@ static void intel_init_display(struct drm_device
> *dev)
> >
> >       if (HAS_DDI(dev)) {
> >               dev_priv->display.get_pipe_config =
> haswell_get_pipe_config;
> > +             dev_priv->display.get_clock = ironlake_crtc_clock_get;
> >               dev_priv->display.crtc_mode_set = haswell_crtc_mode_set;
> >               dev_priv->display.crtc_enable = haswell_crtc_enable;
> >               dev_priv->display.crtc_disable = haswell_crtc_disable;
> > --
> > 1.8.3
> >
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/dri-devel
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/dri-devel/attachments/20130805/7777b58b/attachment-0001.html>


More information about the dri-devel mailing list