[PATCH] drm/i915: add fast boot support for Haswell

Daniel Vetter daniel.vetter at intel.com
Mon Aug 5 13:42:24 PDT 2013


On 05/08/2013 22:24, Furquan Shaikh wrote:
> We tested the submitted patch on several systems here and it seems to 
> be working fine. So, I'm not sure I understand your comment. Can you 
> please provide more details?

You check for the bit DP_PLL_FREQ_160MHZ in the register DP_A when 
calculating the reference frequence for port A eDP panels (i.e. the 
assignement of pipe_config->port_clock). This bit is valid on port A for 
ivb, snb & ilk, but not on hsw. Haswell has a complete new way for 
assigning the pll to the port. For solid fastboot support I think we 
need to support them all (i.e. also the hdmi wrpll clocks and while at 
it we might as well write the fdi dotclock readout code, it should be 
almost the same as the DP dotclock computation).
-Daniel
>
> Thanks,
> Furquan
>
>
> On Mon, Aug 5, 2013 at 12:24 AM, Daniel Vetter <daniel at ffwll.ch 
> <mailto:daniel at ffwll.ch>> wrote:
>
>     On Thu, Aug 01, 2013 at 02:12:22PM -0700, Furquan Shaikh wrote:
>     > Enables getting correct mode clock when reading pipe config
>     >
>     > Signed-off-by: Furquan Shaikh <furquan at google.com
>     <mailto:furquan at google.com>>
>     > ---
>     >  drivers/gpu/drm/i915/intel_ddi.c     | 8 ++++++++
>     >  drivers/gpu/drm/i915/intel_display.c | 9 ++++++++-
>     >  2 files changed, 16 insertions(+), 1 deletion(-)
>     >
>     > diff --git a/drivers/gpu/drm/i915/intel_ddi.c
>     b/drivers/gpu/drm/i915/intel_ddi.c
>     > index 931b4bb..fa0af9b 100644
>     > --- a/drivers/gpu/drm/i915/intel_ddi.c
>     > +++ b/drivers/gpu/drm/i915/intel_ddi.c
>     > @@ -1269,6 +1269,7 @@ static void intel_ddi_get_config(struct
>     intel_encoder *encoder,
>     >       struct drm_i915_private *dev_priv =
>     encoder->base.dev->dev_private;
>     >       struct intel_crtc *intel_crtc =
>     to_intel_crtc(encoder->base.crtc);
>     >       enum transcoder cpu_transcoder =
>     intel_crtc->config.cpu_transcoder;
>     > +     int port = intel_ddi_get_encoder_port(encoder);
>     >       u32 temp, flags = 0;
>     >
>     >       temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
>     > @@ -1282,6 +1283,13 @@ static void intel_ddi_get_config(struct
>     intel_encoder *encoder,
>     >               flags |= DRM_MODE_FLAG_NVSYNC;
>     >
>     >       pipe_config->adjusted_mode.flags |= flags;
>     > +
>     > +     if (port == PORT_A) {
>     > +             if ((I915_READ(DP_A) & DP_PLL_FREQ_MASK) ==
>     DP_PLL_FREQ_160MHZ)
>     > +                     pipe_config->port_clock = 162000;
>     > +             else
>     > +                     pipe_config->port_clock = 270000;
>     > +     }
>
>     I don't think this works correctly since for DP we have new clocks on
>     haswell, see intel_ddi_pll_mode_set. Also I think it'd be good to
>     go right
>     ahead and implement clock readout support for all hsw clock
>     sources, not
>     just DP.
>     -Daniel
>
>     >  }
>     >
>     >  static void intel_ddi_destroy(struct drm_encoder *encoder)
>     > diff --git a/drivers/gpu/drm/i915/intel_display.c
>     b/drivers/gpu/drm/i915/intel_display.c
>     > index 3e66f05..681c99a 100644
>     > --- a/drivers/gpu/drm/i915/intel_display.c
>     > +++ b/drivers/gpu/drm/i915/intel_display.c
>     > @@ -7176,6 +7176,8 @@ static void i9xx_crtc_clock_get(struct
>     intel_crtc *crtc,
>     >               pipe_config->pixel_multiplier;
>     >  }
>     >
>     > +#define div_ceil(A, B) ((A)/(B) + ((A)%(B) ? 1 : 0))
>     > +
>     >  static void ironlake_crtc_clock_get(struct intel_crtc *crtc,
>     >                                   struct intel_crtc_config
>     *pipe_config)
>     >  {
>     > @@ -7218,7 +7220,11 @@ static void
>     ironlake_crtc_clock_get(struct intel_crtc *crtc,
>     >               return;
>     >
>     >       clock = ((u64)link_m * (u64)link_freq * (u64)repeat);
>     > -     do_div(clock, link_n);
>     > +     /* This is required because the value comes out to be in
>     fraction
>     > +        (eg. 70699.54). Need to round it up since values are
>     compared in
>     > +        drm_mode_equal
>     > +     */
>     > +     clock = div_ceil(clock, link_n);
>     >
>     >       pipe_config->adjusted_mode.clock = clock;
>     >  }
>     > @@ -9588,6 +9594,7 @@ static void intel_init_display(struct
>     drm_device *dev)
>     >
>     >       if (HAS_DDI(dev)) {
>     > dev_priv->display.get_pipe_config = haswell_get_pipe_config;
>     > +             dev_priv->display.get_clock = ironlake_crtc_clock_get;
>     >               dev_priv->display.crtc_mode_set =
>     haswell_crtc_mode_set;
>     >               dev_priv->display.crtc_enable = haswell_crtc_enable;
>     >               dev_priv->display.crtc_disable = haswell_crtc_disable;
>     > --
>     > 1.8.3
>     >
>     > _______________________________________________
>     > dri-devel mailing list
>     > dri-devel at lists.freedesktop.org
>     <mailto:dri-devel at lists.freedesktop.org>
>     > http://lists.freedesktop.org/mailman/listinfo/dri-devel
>
>     --
>     Daniel Vetter
>     Software Engineer, Intel Corporation
>     +41 (0) 79 365 57 48 <tel:%2B41%20%280%29%2079%20365%2057%2048> -
>     http://blog.ffwll.ch
>
>

Intel Semiconductor AG
Registered No. 020.30.913.786-7
Registered Office: World Trade Center, Leutschenbachstrasse 95, 8050 Zurich, Switzerland

This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/dri-devel/attachments/20130805/9c23f73f/attachment-0001.html>


More information about the dri-devel mailing list