[Intel-gfx] [PATCH 5/9] drm/i915: Include display_mmio_offset in sequencer index/data registers

[ville.syrjala at linux.intel.com]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

SR01 needs to be touched to disable VGA on non-UMS setups too.
So the sequencer registers need to include the appripriate offset
on VLV.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 213ff6c..9f4305f 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -141,9 +141,15 @@
 #define   VGA_MSR_MEM_EN (1<<1)
 #define   VGA_MSR_CGA_MODE (1<<0)
 
-#define VGA_SR_INDEX 0x3c4
+/*
+ * SR01 is the only VGA register touched on non-UMS setups.
+ * VLV doesn't do UMS, so the sequencer index/data registers
+ * are the only VGA registers which need to include
+ * display_mmio_offset.
+ */
+#define VGA_SR_INDEX (dev_priv->info->display_mmio_offset + 0x3c4)
 #define SR01			1
-#define VGA_SR_DATA 0x3c5
+#define VGA_SR_DATA (dev_priv->info->display_mmio_offset + 0x3c5)
 
 #define VGA_AR_INDEX 0x3c0
 #define   VGA_AR_VID_EN (1<<5)
-- 
1.7.12.4