[PATCH 2/4] build: include ax_code_coverage.m4 serial 5
Jakub Sitnicki
jsitnicki at gmail.com
Sun Jan 11 06:07:21 PST 2015
So that we don't require a fairly recent version of
autoconf-archive (v2014.10.15 or newer) to build.
---
m4/ax_code_coverage.m4 | 229 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 229 insertions(+)
create mode 100644 m4/ax_code_coverage.m4
diff --git a/m4/ax_code_coverage.m4 b/m4/ax_code_coverage.m4
new file mode 100644
index 0000000..2751459
--- /dev/null
+++ b/m4/ax_code_coverage.m4
@@ -0,0 +1,229 @@
+# ===========================================================================
+# http://www.gnu.org/software/autoconf-archive/ax_code_coverage.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+# AX_CODE_COVERAGE()
+#
+# DESCRIPTION
+#
+# Defines CODE_COVERAGE_CFLAGS and CODE_COVERAGE_LDFLAGS which should be
+# included in the CFLAGS and LIBS/LDFLAGS variables of every build target
+# (program or library) which should be built with code coverage support.
+# Also defines CODE_COVERAGE_RULES which should be substituted in your
+# Makefile; and $enable_code_coverage which can be used in subsequent
+# configure output. CODE_COVERAGE_ENABLED is defined and substituted, and
+# corresponds to the value of the --enable-code-coverage option, which
+# defaults to being disabled.
+#
+# Test also for gcov program and create GCOV variable that could be
+# substituted.
+#
+# Note that all optimisation flags in CFLAGS must be disabled when code
+# coverage is enabled.
+#
+# Usage example:
+#
+# configure.ac:
+#
+# AX_CODE_COVERAGE
+#
+# Makefile.am:
+#
+# @CODE_COVERAGE_RULES@
+# my_program_LIBS = ... $(CODE_COVERAGE_LDFLAGS) ...
+# my_program_CFLAGS = ... $(CODE_COVERAGE_CFLAGS) ...
+#
+# This results in a "check-code-coverage" rule being added to any
+# Makefile.am which includes "@CODE_COVERAGE_RULES@" (assuming the module
+# has been configured with --enable-code-coverage). Running `make
+# check-code-coverage` in that directory will run the module's test suite
+# (`make check`) and build a code coverage report detailing the code which
+# was touched, then print the URI for the report.
+#
+# This code was derived from Makefile.decl in GLib, originally licenced
+# under LGPLv2.1+.
+#
+# LICENSE
+#
+# Copyright (c) 2012 Philip Withnall
+# Copyright (c) 2012 Xan Lopez
+# Copyright (c) 2012 Christian Persch
+# Copyright (c) 2012 Paolo Borelli
+# Copyright (c) 2012 Dan Winship
+# Copyright (c) 2015 Bastien ROUCARIES
+#
+# This library is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2.1 of the License, or (at
+# your option) any later version.
+#
+# This library is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+#serial 5
+
+AC_DEFUN([AX_CODE_COVERAGE],[
+ dnl Check for --enable-code-coverage
+ AC_REQUIRE([AC_PROG_SED])
+
+ # allow to override gcov location
+ AC_ARG_WITH([gcov],
+ [AS_HELP_STRING([--with-gcov[=GCOV]], [use given GCOV for coverage (GCOV=gcov).])],
+ [_AX_CODE_COVERAGE_GCOV_PROG_WITH=$with_gcov],
+ [_AX_CODE_COVERAGE_GCOV_PROG_WITH=gcov])
+
+ AC_MSG_CHECKING([whether to build with code coverage support])
+ AC_ARG_ENABLE([code-coverage],
+ AS_HELP_STRING([--enable-code-coverage],
+ [Whether to enable code coverage support]),,
+ enable_code_coverage=no)
+
+ AM_CONDITIONAL([CODE_COVERAGE_ENABLED], [test x$enable_code_coverage = xyes])
+ AC_SUBST([CODE_COVERAGE_ENABLED], [$enable_code_coverage])
+ AC_MSG_RESULT($enable_code_coverage)
+
+ AS_IF([ test "$enable_code_coverage" = "yes" ], [
+ # check for gcov
+ AC_CHECK_TOOL([GCOV],
+ [$_AX_CODE_COVERAGE_GCOV_PROG_WITH],
+ [:])
+ AS_IF([test "X$GCOV" = "X:"],
+ [AC_MSG_ERROR([gcov is needed to do coverage])])
+ AC_SUBST([GCOV])
+
+ dnl Check if gcc is being used
+ AS_IF([ test "$GCC" = "no" ], [
+ AC_MSG_ERROR([not compiling with gcc, which is required for gcov code coverage])
+ ])
+
+ # List of supported lcov versions.
+ lcov_version_list="1.6 1.7 1.8 1.9 1.10 1.11"
+
+ AC_CHECK_PROG([LCOV], [lcov], [lcov])
+ AC_CHECK_PROG([GENHTML], [genhtml], [genhtml])
+
+ AS_IF([ test "$LCOV" ], [
+ AC_CACHE_CHECK([for lcov version], ax_cv_lcov_version, [
+ ax_cv_lcov_version=invalid
+ lcov_version=`$LCOV -v 2>/dev/null | $SED -e 's/^.* //'`
+ for lcov_check_version in $lcov_version_list; do
+ if test "$lcov_version" = "$lcov_check_version"; then
+ ax_cv_lcov_version="$lcov_check_version (ok)"
+ fi
+ done
+ ])
+ ], [
+ lcov_msg="To enable code coverage reporting you must have one of the following lcov versions installed: $lcov_version_list"
+ AC_MSG_ERROR([$lcov_msg])
+ ])
+
+ case $ax_cv_lcov_version in
+ ""|invalid[)]
+ lcov_msg="You must have one of the following versions of lcov: $lcov_version_list (found: $lcov_version)."
+ AC_MSG_ERROR([$lcov_msg])
+ LCOV="exit 0;"
+ ;;
+ esac
+
+ AS_IF([ test -z "$GENHTML" ], [
+ AC_MSG_ERROR([Could not find genhtml from the lcov package])
+ ])
+
+ dnl Build the code coverage flags
+ CODE_COVERAGE_CFLAGS="-O0 -g -fprofile-arcs -ftest-coverage"
+ CODE_COVERAGE_LDFLAGS="-lgcov"
+
+ AC_SUBST([CODE_COVERAGE_CFLAGS])
+ AC_SUBST([CODE_COVERAGE_LDFLAGS])
+ ])
+
+CODE_COVERAGE_RULES='
+# Code coverage
+#
+# Optional:
+# - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting.
+# (Default: $(top_builddir))
+# - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated
+# by lcov for code coverage. (Default:
+# $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info)
+# - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage
+# reports to be created. (Default:
+# $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage)
+# - CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH: --gcov-tool pathtogcov
+# - CODE_COVERAGE_LCOV_OPTIONS_DEFAULT: Extra options to pass to the lcov instance.
+# (Default: $CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH)
+# - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the lcov instance.
+# (Default: $CODE_COVERAGE_LCOV_OPTIONS_DEFAULT)
+# - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml
+# instance. (Default: empty)
+# - CODE_COVERAGE_IGNORE_PATTERN: Extra glob pattern of files to ignore
+#
+# The generated report will be titled using the $(PACKAGE_NAME) and
+# $(PACKAGE_VERSION). In order to add the current git hash to the title,
+# use the git-version-gen script, available online.
+
+# Optional variables
+CODE_COVERAGE_DIRECTORY ?= $(top_builddir)
+CODE_COVERAGE_OUTPUT_FILE ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info
+CODE_COVERAGE_OUTPUT_DIRECTORY ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage
+CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH ?= --gcov-tool "$(GCOV)"
+CODE_COVERAGE_LCOV_OPTIONS_DEFAULT ?= $(CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH)
+CODE_COVERAGE_LCOV_OPTIONS ?= $(CODE_COVERAGE_LCOV_OPTIONS_DEFAULT)
+CODE_COVERAGE_GENHTML_OPTIONS ?=
+CODE_COVERAGE_IGNORE_PATTERN ?=
+
+code_coverage_quiet = $(code_coverage_quiet_$(V))
+code_coverage_quiet_ = $(code_coverage_quiet_$(AM_DEFAULT_VERBOSITY))
+code_coverage_quiet_0 = --quiet
+
+# Use recursive makes in order to ignore errors during check
+check-code-coverage:
+ifeq ($(CODE_COVERAGE_ENABLED),yes)
+ -$(MAKE) $(AM_MAKEFLAGS) -k check
+ $(MAKE) $(AM_MAKEFLAGS) code-coverage-capture
+else
+ @echo "Need to reconfigure with --enable-code-coverage"
+endif
+
+# Capture code coverage data
+code-coverage-capture: code-coverage-capture-hook
+ifeq ($(CODE_COVERAGE_ENABLED),yes)
+ $(LCOV) $(code_coverage_quiet) --directory $(CODE_COVERAGE_DIRECTORY) --capture --output-file "$(CODE_COVERAGE_OUTPUT_FILE).tmp" --test-name "$(PACKAGE_NAME)-$(PACKAGE_VERSION)" --no-checksum --compat-libtool $(CODE_COVERAGE_LCOV_OPTIONS)
+ $(LCOV) $(code_coverage_quiet) --directory $(CODE_COVERAGE_DIRECTORY) --remove "$(CODE_COVERAGE_OUTPUT_FILE).tmp" "/tmp/*" $(CODE_COVERAGE_IGNORE_PATTERN) --output-file "$(CODE_COVERAGE_OUTPUT_FILE)"
+ - at rm -f $(CODE_COVERAGE_OUTPUT_FILE).tmp
+ LANG=C $(GENHTML) $(code_coverage_quiet) --prefix $(CODE_COVERAGE_DIRECTORY) --output-directory "$(CODE_COVERAGE_OUTPUT_DIRECTORY)" --title "$(PACKAGE_NAME)-$(PACKAGE_VERSION) Code Coverage" --legend --show-details "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_GENHTML_OPTIONS)
+ @echo "file://$(abs_builddir)/$(CODE_COVERAGE_OUTPUT_DIRECTORY)/index.html"
+else
+ @echo "Need to reconfigure with --enable-code-coverage"
+endif
+
+# Hook rule executed before code-coverage-capture, overridable by the user
+code-coverage-capture-hook:
+
+ifeq ($(CODE_COVERAGE_ENABLED),yes)
+clean: code-coverage-clean
+code-coverage-clean:
+ -$(LCOV) --directory $(top_builddir) -z
+ -rm -rf $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_FILE).tmp $(CODE_COVERAGE_OUTPUT_DIRECTORY)
+ -find . -name "*.gcda" -o -name "*.gcov" -delete
+endif
+
+GITIGNOREFILES ?=
+GITIGNOREFILES += $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_DIRECTORY)
+
+DISTCHECK_CONFIGURE_FLAGS ?=
+DISTCHECK_CONFIGURE_FLAGS += --disable-code-coverage
+
+.PHONY: check-code-coverage code-coverage-capture code-coverage-capture-hook code-coverage-clean
+'
+
+ AC_SUBST([CODE_COVERAGE_RULES])
+ m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([CODE_COVERAGE_RULES])])
+])
--
1.9.3
More information about the ModemManager-devel
mailing list