[PATCH v2 2/2] drm/amd/display: Support amdgpu "max bpc" connector property
Nicholas Kazlauskas
nicholas.kazlauskas at amd.com
Wed Nov 7 17:50:16 UTC 2018
[Why]
Many panels support more than 8bpc but some modes are unavailable while
running at greater than 8bpc due to DP/HDMI bandwidth constraints.
Support for more than 8bpc was added recently in the driver but it
defaults to the maximum supported bpc - locking out these modes.
This should be a user configurable option such that the user can select
what bpc configuration they would like.
[How]
This patch adds support for getting and setting the amdgpu driver
specific "max bpc" property on the connector.
It also adds support for limiting the output bpc based on the property
value. The default limitation is the lowest value in the range, 8bpc.
This was the old value before the range was uncapped.
This patch should be updated/replaced later once common drm support
for max bpc lands.
Bugzilla: https://bugs.freedesktop.org/108542
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201585
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200645
Fixes: e03fd3f300f6 ("drm/amd/display: Do not limit color depth to 8bpc")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas at amd.com>
---
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 16 ++++++++++++++++
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 1 +
2 files changed, 17 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index c440d967db57..6b746afc55e7 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -2417,8 +2417,15 @@ static void update_stream_scaling_settings(const struct drm_display_mode *mode,
static enum dc_color_depth
convert_color_depth_from_display_info(const struct drm_connector *connector)
{
+ struct dm_connector_state *dm_conn_state =
+ to_dm_connector_state(connector->state);
uint32_t bpc = connector->display_info.bpc;
+ /* TODO: Remove this when there's support for max_bpc in drm */
+ if (dm_conn_state && bpc > dm_conn_state->max_bpc)
+ /* Round down to nearest even number. */
+ bpc = dm_conn_state->max_bpc - (dm_conn_state->max_bpc & 1);
+
switch (bpc) {
case 0:
/*
@@ -3001,6 +3008,9 @@ int amdgpu_dm_connector_atomic_set_property(struct drm_connector *connector,
} else if (property == adev->mode_info.underscan_property) {
dm_new_state->underscan_enable = val;
ret = 0;
+ } else if (property == adev->mode_info.max_bpc_property) {
+ dm_new_state->max_bpc = val;
+ ret = 0;
} else if (property == adev->mode_info.freesync_property) {
dm_new_state->freesync_enable = val;
ret = 0;
@@ -3049,6 +3059,9 @@ int amdgpu_dm_connector_atomic_get_property(struct drm_connector *connector,
} else if (property == adev->mode_info.underscan_property) {
*val = dm_state->underscan_enable;
ret = 0;
+ } else if (property == adev->mode_info.max_bpc_property) {
+ *val = dm_state->max_bpc;
+ ret = 0;
} else if (property == adev->mode_info.freesync_property) {
*val = dm_state->freesync_enable;
ret = 0;
@@ -3864,6 +3877,9 @@ void amdgpu_dm_connector_init_helper(struct amdgpu_display_manager *dm,
drm_object_attach_property(&aconnector->base.base,
adev->mode_info.underscan_vborder_property,
0);
+ drm_object_attach_property(&aconnector->base.base,
+ adev->mode_info.max_bpc_property,
+ 0);
if (connector_type == DRM_MODE_CONNECTOR_HDMIA ||
connector_type == DRM_MODE_CONNECTOR_DisplayPort) {
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
index 23f2d05cf07e..afcb9842bb45 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
@@ -252,6 +252,7 @@ struct dm_connector_state {
enum amdgpu_rmx_type scaling;
uint8_t underscan_vborder;
uint8_t underscan_hborder;
+ uint8_t max_bpc;
bool underscan_enable;
bool freesync_enable;
bool freesync_capable;
--
2.17.1
More information about the amd-gfx
mailing list