Trying to run AMD E9260 (Polaris 11) on NXP LS1012A-RDB
Christian König
ckoenig.leichtzumerken at gmail.com
Thu Jan 10 10:59:34 UTC 2019
> The PCI Express controller as instantiated on this chip does not
> support hardware coherency. All incoming PCI Express transactions are
> made non IO-coherent.
>
> Would AMDGPU still work with that PCI Express controller, or is this a
> show-stopper?
I'm really wondering what this comment in the documentation means.
As far as I know PCIe doesn't support cache coherency in the downstream
and supporting it in the up stream is a must have.
So what exactly is meant here with IO-coherent?
Regards,
Christian.
Am 10.01.19 um 11:55 schrieb Bas Vermeulen:
> Hi Alex,
>
> I've managed to get a little further. I am currently running mainline
> (5.0.0-rc1) and am getting the errors below.
> Looking at the datasheet for the LS1012A, it mentions in the PCI
> Express section that:
>
> The PCI Express controller as instantiated on this chip does not
> support hardware coherency. All incoming PCI Express transactions are
> made non IO-coherent.
>
> Would AMDGPU still work with that PCI Express controller, or is this a
> show-stopper?
>
> [ 5.727691] [drm] initializing kernel modesetting (POLARIS11
> 0x1002:0x67E8 0x1DA2:0xE362 0x80).
> [ 5.761767] [drm] register mmio base: 0x58000000
> [ 5.777272] [drm] register mmio size: 262144
> [ 5.825973] [drm] add ip block number 0 <vi_common>
> [ 5.832242] [drm] add ip block number 1 <gmc_v8_0>
> [ 5.837767] [drm] add ip block number 2 <tonga_ih>
> [ 5.843121] [drm] add ip block number 3 <gfx_v8_0>
> [ 5.848480] [drm] add ip block number 4 <sdma_v3_0>
> [ 5.853969] [drm] add ip block number 5 <powerplay>
> [ 5.859413] [drm] add ip block number 6 <dm>
> [ 5.864238] [drm] add ip block number 7 <uvd_v6_0>
> [ 5.869690] [drm] add ip block number 8 <vce_v3_0>
> [ 5.875067] [drm] UVD is enabled in VM mode
> [ 5.879858] [drm] UVD ENC is enabled in VM mode
> [ 5.884985] [drm] VCE enabled in VM mode
> [ 6.114020] ATOM BIOS: 113-C98511-U01
> [ 6.117757] [drm] GPU posting now...
> [ 6.238112] [drm] vm size is 64 GB, 2 levels, block size is 10-bit,
> fragment size is 9-bit
> [ 6.247290] amdgpu 0000:01:00.0: BAR 2: releasing [mem
> 0x4050000000-0x40501fffff 64bit pref]
> [ 6.257354] amdgpu 0000:01:00.0: BAR 0: releasing [mem
> 0x4040000000-0x404fffffff 64bit pref]
> [ 6.267261] pcieport 0000:00:00.0: BAR 15: releasing [mem
> 0x4040000000-0x4057ffffff 64bit pref]
> [ 6.277288] pcieport 0000:00:00.0: BAR 15: no space for [mem size
> 0x300000000 64bit pref]
> [ 6.286843] pcieport 0000:00:00.0: BAR 15: failed to assign [mem
> size 0x300000000 64bit pref]
> [ 6.296708] amdgpu 0000:01:00.0: BAR 0: no space for [mem size
> 0x200000000 64bit pref]
> [ 6.306009] amdgpu 0000:01:00.0: BAR 0: failed to assign [mem size
> 0x200000000 64bit pref]
> [ 6.315635] amdgpu 0000:01:00.0: BAR 2: no space for [mem size
> 0x00200000 64bit pref]
> [ 6.324804] amdgpu 0000:01:00.0: BAR 2: failed to assign [mem size
> 0x00200000 64bit pref]
> [ 6.334366] pcieport 0000:00:00.0: PCI bridge to [bus 01-ff]
> [ 6.341323] pcieport 0000:00:00.0: bridge window [io 0x1000-0x1fff]
> [ 6.349158] pcieport 0000:00:00.0: bridge window [mem
> 0x4058000000-0x40580fffff]
> [ 6.358095] pcieport 0000:00:00.0: PCI bridge to [bus 01-ff]
> [ 6.365054] pcieport 0000:00:00.0: bridge window [io 0x1000-0x1fff]
> [ 6.372981] pcieport 0000:00:00.0: bridge window [mem
> 0x4058000000-0x40580fffff]
> [ 6.381917] pcieport 0000:00:00.0: bridge window [mem
> 0x4040000000-0x4057ffffff 64bit pref]
> [ 6.391789] [drm] Not enough PCI address space for a large BAR.
> [ 6.391820] amdgpu 0000:01:00.0: BAR 0: assigned [mem
> 0x4040000000-0x404fffffff 64bit pref]
> [ 6.407776] amdgpu 0000:01:00.0: BAR 2: assigned [mem
> 0x4050000000-0x40501fffff 64bit pref]
> [ 6.417672] amdgpu 0000:01:00.0: VRAM: 8192M 0x000000F400000000 -
> 0x000000F5FFFFFFFF (8192M used)
> [ 6.426586] amdgpu 0000:01:00.0: GART: 256M 0x000000FF00000000 -
> 0x000000FF0FFFFFFF
> [ 6.436171] [drm] Detected VRAM RAM=8192M, BAR=256M
> [ 6.478952] [drm] GART: num cpu pages 65536, num gpu pages 65536
> [ 6.487871] [drm] PCIE GART of 256M enabled (table at
> 0x000000F400000000).
> [ 6.496316] amdgpu 0000:01:00.0: Direct firmware load for
> amdgpu/polaris11_pfp_2.bin failed with error -2
> [ 6.508078] amdgpu 0000:01:00.0: Direct firmware load for
> amdgpu/polaris11_me_2.bin failed with error -2
> [ 6.519538] amdgpu 0000:01:00.0: Direct firmware load for
> amdgpu/polaris11_ce_2.bin failed with error -2
> [ 6.531496] amdgpu 0000:01:00.0: Direct firmware load for
> amdgpu/polaris11_mec_2.bin failed with error -2
> [ 6.544214] amdgpu 0000:01:00.0: Direct firmware load for
> amdgpu/polaris11_mec2_2.bin failed with error -2
> [ 6.565121] [drm] Found UVD firmware Version: 1.79 Family ID: 16
> [ 6.571241] [drm] UVD ENC is disabled
> [ 6.580927] [drm] Found VCE firmware Version: 52.4 Binary ID: 3
> [ 6.656854] amdgpu 0000:01:00.0: GPU fault detected: 147 0x00004802
> for process pid 0 thread pid 0
> [ 6.666013] amdgpu 0000:01:00.0:
> VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x0017F000
> [ 6.673508] amdgpu 0000:01:00.0:
> VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x02048002
> [ 6.681006] amdgpu 0000:01:00.0: VM fault (0x02, vmid 1, pasid 0)
> at page 1568768, read from 'TC0' (0x54433000) (72)
> [ 6.691557] amdgpu 0000:01:00.0: GPU fault detected: 147 0x00004402
> for process pid 0 thread pid 0
> [ 6.700706] amdgpu 0000:01:00.0:
> VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x0017F000
> [ 6.708200] amdgpu 0000:01:00.0:
> VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x02048002
> [ 6.715697] amdgpu 0000:01:00.0: VM fault (0x02, vmid 1, pasid 0)
> at page 1568768, read from 'TC0' (0x54433000) (72)
> [ 6.726246] amdgpu 0000:01:00.0: GPU fault detected: 147 0x00000402
> for process pid 0 thread pid 0
> [ 6.735395] amdgpu 0000:01:00.0:
> VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x0017F000
> [ 6.742889] amdgpu 0000:01:00.0:
> VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x02048002
> [ 6.750386] amdgpu 0000:01:00.0: VM fault (0x02, vmid 1, pasid 0)
> at page 1568768, read from 'TC0' (0x54433000) (72)
> [ 6.984485] amdgpu 0000:01:00.0: [drm:amdgpu_ring_test_helper
> [amdgpu]] *ERROR* ring gfx test failed (-110)
> [ 6.994562] [drm:amdgpu_device_init [amdgpu]] *ERROR* hw_init of IP
> block <gfx_v8_0> failed -110
> [ 7.004942] amdgpu 0000:01:00.0: amdgpu_device_ip_init failed
> [ 7.011963] amdgpu 0000:01:00.0: Fatal error during GPU init
> [ 7.018890] [drm] amdgpu: finishing device.
> [ 7.308898] WARNING: CPU: 0 PID: 2084 at
> /home/bas/linux/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c:915
> amdgpu_bo_unpin+0xe4/0x110 [amdgpu]
> [ 7.321451] Modules linked in: amdgpu(+) realtek chash gpu_sched
> ttm drm_kms_helper drm crct10dif_ce drm_panel_orientation_quirks
> pfe(C) ip_tables x_tables ipv6
> [ 7.335850] CPU: 0 PID: 2084 Comm: systemd-udevd Tainted: G
> C 5.0.0-rc1-00001-g3bd6e94bec12-dirty #1
> [ 7.346303] Hardware name: LS1012A RDB Board (DT)
> [ 7.351014] pstate: 40000005 (nZcv daif -PAN -UAO)
> [ 7.356090] pc : amdgpu_bo_unpin+0xe4/0x110 [amdgpu]
> [ 7.361307] lr : amdgpu_bo_free_kernel+0x7c/0x148 [amdgpu]
> [ 7.366799] sp : ffff0000118c3730
> [ 7.370114] x29: ffff0000118c3730 x28: ffff000008e63710
> [ 7.375434] x27: ffff0000118c3df0 x26: 0000000000000100
> [ 7.380754] x25: ffff80003599cb60 x24: ffff8000359927d0
> [ 7.386073] x23: ffff800035994750 x22: ffff8000359927d0
> [ 7.391393] x21: ffff8000358cb800 x20: ffff0000111fd000
> [ 7.396713] x19: ffff8000358cb800 x18: 000000000000001e
> [ 7.402033] x17: 0000000000000000 x16: 0000000000000002
> [ 7.407351] x15: 0000000000000400 x14: 0000000000000400
> [ 7.412670] x13: 000000000000cb72 x12: 000000000000b308
> [ 7.417989] x11: ffff7e0000d02488 x10: ffff800037798030
> [ 7.423308] x9 : ffff0000118c36e4 x8 : 0000000000000000
> [ 7.428627] x7 : 0000000000210d00 x6 : 0000000000000000
> [ 7.433946] x5 : 0000000000000001 x4 : 0000000000000001
> [ 7.439265] x3 : ffff8000358cb87c x2 : 0000000000000000
> [ 7.444583] x1 : 0000000000000000 x0 : ffff8000358cb800
> [ 7.449903] Call trace:
> [ 7.452583] amdgpu_bo_unpin+0xe4/0x110 [amdgpu]
> [ 7.457437] amdgpu_bo_free_kernel+0x7c/0x148 [amdgpu]
> [ 7.462812] amdgpu_gfx_rlc_fini+0x50/0x78 [amdgpu]
> [ 7.467926] gfx_v8_0_sw_fini+0xfc/0x1c0 [amdgpu]
> [ 7.472864] amdgpu_device_fini+0x1e0/0x480 [amdgpu]
> [ 7.478058] amdgpu_driver_unload_kms+0xa0/0x150 [amdgpu]
> [ 7.483686] amdgpu_driver_load_kms+0x144/0x1f8 [amdgpu]
> [ 7.489110] drm_dev_register+0x14c/0x1e0 [drm]
> [ 7.493906] amdgpu_pci_probe+0xcc/0x188 [amdgpu]
> [ 7.498622] local_pci_probe+0x3c/0xb0
> [ 7.502375] pci_device_probe+0x150/0x1b8
> [ 7.506390] really_probe+0x1f0/0x298
> [ 7.510055] driver_probe_device+0x58/0x100
> [ 7.514242] __driver_attach+0xd4/0xd8
> [ 7.517993] bus_for_each_dev+0x74/0xc8
> [ 7.521832] driver_attach+0x20/0x28
> [ 7.525410] bus_add_driver+0x1ac/0x218
> [ 7.529250] driver_register+0x60/0x110
> [ 7.533089] __pci_register_driver+0x40/0x48
> [ 7.537599] amdgpu_init+0x58/0x1000 [amdgpu]
> [ 7.541964] do_one_initcall+0x5c/0x178
> [ 7.545804] do_init_module+0x58/0x1b0
> [ 7.549556] load_module+0x1dc8/0x2178
> [ 7.553308] __se_sys_finit_module+0xbc/0xd0
> [ 7.557582] __arm64_sys_finit_module+0x18/0x20
> [ 7.562119] el0_svc_common+0x60/0x100
> [ 7.565872] el0_svc_handler+0x2c/0x80
> [ 7.581715] amdgpu 0000:01:00.0: (____ptrval____) unpin not necessary
> [ 7.594743] [TTM] Finalizing pool allocator
> [ 7.599867] [TTM] Finalizing DMA pool allocator
> [ 7.605265] [TTM] Zone kernel: Used memory at exit: 0 kiB
> [ 7.611482] [drm] amdgpu: ttm finalized
> [ 7.618028] amdgpu: probe of 0000:01:00.0 failed with error -110
>
> Bas Vermeulen
>
>
> On Thu, Dec 20, 2018 at 5:11 PM Bas Vermeulen <bas at daedalean.ai
> <mailto:bas at daedalean.ai>> wrote:
>
> Hi Alex,
>
> I already have a similar patch in, that doesn't fix it just yet.
> I'll investigate some more.
>
> Bas Vermeulen
>
> On Thu, Dec 20, 2018 at 4:27 PM Alex Deucher
> <alexdeucher at gmail.com <mailto:alexdeucher at gmail.com>> wrote:
>
> On Thu, Dec 20, 2018 at 9:06 AM Bas Vermeulen
> <bas at daedalean.ai <mailto:bas at daedalean.ai>> wrote:
> >
> > Hi all,
> >
> > I have connected an E9260 (Polaris 11 based) to a mini-PCIe
> slot on my NXP LS1012ARDB.
> > The GPU is seen, all the BARs are correctly assigned (but
> there's not enough PCIe memory space for the big BARs).
> >
> > When I try to load the amdgpu module, I can't get the driver
> to enable the acceleration (the scratch register check fails).
> >
> > The E9260 is connected to a PCIe x1 (Gen2) slot.
> >
> > Anyone have an idea on where to look or how to fix this?
> This is a test-bed before we get an LS1046ARDB with quad core
> A72's.
> >
> > Any help would be appreciated,
>
> Something like this patch should fix it assuming this is an
> ARM based platform:
> https://patchwork.freedesktop.org/patch/269367/
>
> Alex
>
> >
> > Bas Vermeulen
> > _______________________________________________
> > amd-gfx mailing list
> > amd-gfx at lists.freedesktop.org
> <mailto:amd-gfx at lists.freedesktop.org>
> > https://lists.freedesktop.org/mailman/listinfo/amd-gfx
>
>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/amd-gfx/attachments/20190110/1a8f43fd/attachment-0001.html>
More information about the amd-gfx
mailing list